I was trying to install a driver to see if the performance would increase. It crashed my system. Also, a crash occurred yesterday and the day before yesterday.
Using windows update I was installing the MS Drawing Driver and my keyboard flashed (blue lights) and the next thing a BSOD. I have attached the collected files, how to confirm the MS Drawing Driver is responsible.
It was fine last night then suddenly today, this error keep appearing. Is there a way to fix it? I've been searching for solution but I still don't know what to do.
i have got an upgrade of window 10 2 days back...i have installed it but wireless driver is not installing on my laptop as i have tried it many times....i have installed driver tool kit but it needs internet as i can not connect to any W-network because of driver incompatibility.
I've been hearing about this issue for people with Nvidia GPUs. The driver cannot be installed, and it says that there is no compatible hardware. My GPU is a GTX 960. What should I do to get the driver installed on Windows 10?
Dell WLAN bluetooth driver is not installing on my laptop . I found out that the same driver is working fine on my friend's laptop and i even used same driver for windows 8.1 previously.While I install it ,it shows an error that "The installer cannot run on this platform...",,I even tried refreshing my laptop but still it didnot work..
I upgraded to windows 10 a day or so after it was released and now when I go to plug in my laptop to tv via hdmi or when I plug in an old xbox360 wired controller it keeps telling me that it found the updates for the drivers but encountered an error while attempting to install them. It doesn't give me an error code for this. Also when I check the updated center is says it could not install updates and gives me an error: Error 0x8000ffff.
I am using Windows 10 in Microsoft Surface Pro 4 tablet. I installed Fresco Logic Thin2000 USB display driver in Windows 10. After the reboot windows 10 started crashing. I did boot in safe mode but safe mode is preventing me from uninstalling it.
What do I do? this was installed so that I could connect device to projector. In safe mode I am unable to remove it and windows 10 is not booting in normal mode. It showing error system_service_exception(Ddkmd.sys) at boot.
I have an Asus Maximus VI Hero and am trying to download drivers after my clean install of Windows 10. I downloaded the file for my boards audio driver from the asus website but when I ran it the program kept saying it needed to uninstall the previous driver before installing the new one and then restart. It kept restarting and doing that over and over again never actually installing the new driver.
I've just bought my first SSD and want to install windows 10 onto it. I used the media creation tool to install the OS onto a bootable USB but when I try to install the software onto my SSD I get an error. It reads:
"A media driver your computer needs is missing. This could be a DVD, USB or Hard disk driver. If you have a CD, DVD or USB flash drive with the driver on it, please insert it now."
I have tried hooking up my optical drive and inserting the disks that came with the motherboard and graphics card but it says it can't find any drivers. I'll attach an image below of the problem I'm facing.
Windows 10 keeps installing the ASUS Smart Gesture touchpad driver on my laptop. The driver is garbage and it runs three memory resident processes, which seems rather excessive for a touchpad driver. The default Windows touchpad driver works perfectly well, so I want to use that instead of the ASUS driver. However, if I uninstall the ASUS driver Windows Update quickly reinstalls it.
I disabled automatic driver installation when I installed Windows 10, as you can see here:
Despite that Windows update keeps installing the ASUS Smart Gesture driver.
Windows 10 Pro and I am having an issue with my Touchpad driver, it seems to want to mess up and not move to where I need it to go, so I uninstalled it from the Programs and Features menu, but my issue is it keeps popping back up in Windows Update and installing on its own, I don't want the driver for it as it doesn't function correctly with it installed it works great when its not installed so how can I hide it
I just put a new RAM, 2GB, on my computer, and when I turned it on, it worked nice for about 3 minutes. Then it suddenly froze compltely with nothing responding. First Firefox, then My Computer window, then everything, all this in about 10s. After another 20s, blue screen showing "critical process died" showed up. I managed to see that out of 4GB that I now had, 3,25 were usable (I thought W10 x32 supports 4GB?). I am uploading a report. I am almost aboslutely certain that this had something to do with the new RAM since before that it worked just fine, and now fine again after I removed the new one.
ASUSTeK COMPUTER INC. X551MA Serial #: E5N0CX006715187
Windows 10 Core (10.0.10240.16590) my computer crashed brings up Recovery file: BCD Error code: Oxc0000034 then goes to Aptio setup utility screen. i signed in as administrator and added passwords now i just need to know what i need to do from here.
I have a Dell 2305 running an AMD 64 bit processor.It originally ran Win 7.Randomly, I get an error message that the display driver stopped.When magnifier is running, its window goes black.It sometimes recovers...sometimes it crashes the system and goes into restart. AMD web site says its due to a timeout with no further way.
For the past few days someone I know has been getting various bsods at random times. Whether it be sitting idle or playing a game. I've been using teamviewer and I have been trying to figure out what the deal is for a few days now and I can't figure out what's going on here.
I've never looked into blue screens so much in my life before this and I've just about given up. From what I've gathered, this could possibly be a bad driver since this is a Windows 10 upgrade from a Windows 8.1, but I can't figure out how to identify it.
It started happening after a blue screen while playing a game. The computer itself is a prebuilt. The bsod checkers I've used consistently point to ntoskrnl.exe being the reason for it. But I've gotten WDFLDR.sys, hal.dll, HDAudBus.sys and such along with it. However they have not appeared since (I've been trying to fix them by updating various drivers).
We've been fine for the past 2 days, then it happened again 3 times. A fourth time recently when I tried using that Dm Log Collector (and the computer was idle for hours just fine). Should I uninstall or update? Or perhaps any other issues?
Having an annoying problem where when I try and install a software package for a device the system hard locks during the driver installation phase. No BSOD, simply freezes at the same point during the installation. Doesn't do it for every device I've installed its only done it for my Avermedia C985 capture card and now for a D-Link USB WIFI stick.
I had to manually install the drivers for the capture card through the device manager. The USB stick is harder because I cant get the software separately to the driver so can't complete the installation.
I've tried disabling driver verification but that didn't work.
The bluescreens are really random and like to happen out of no where. I could be playing League or Blade and Soul and it when it happens. I usually always have chrome open in the background watching something. Some days PC would boot up and I would have to restart because it's slow and not opening anything.
I get these random freezes since I've updated to Windows 10. Did not happen with Windows 7. Freezes are random and take about 10-15sec each time. Driver Verifier causes BSOD.
I get the Driver overran stack buffer error with BSOD randomly sometimes while gaming (rust, dishonored, Skyrim, civ 5, and most any other game). I have manually updated the drivers for my motherboard, video card, and peripheries. I also randomly get the irql_not_less_or_equal BSOD during the same things (though this one appears to only happen when internet windows are open thru chrome and/or Microsoft edge). My game files are on an external Toshiba hard drive.
Ever since I updated to windows 10, my computer automatically installs some Nvidia drivers from their servers. From past experience I know that my computer can get random BSOD's with the wrong Nvidia drivers installed (WinDBG always pointed towards nvdllmkm.sys). So previously when their was an Nvidia update that would cause crashes, I could install a previous version that I knew was working, however if I do this know I'm forced to go to Nvidia builds before the windows 10 update and afterwards windows update just reinstalls the windows 10 version it thinks I need.
So instead of trying to install previous Nvidia versions, I want to go into the root of the problem and find out why I'm getting these random BSOD's (BTW mostly happens when I'm watching a show, so could be temperature related?). Furthermore, I would prefer to stay on windows 10
My computer seems to run fine but whenever I shut it down or restart it the screen goes black for about 10 minutes and then I get a blue screen with a driver power state failure. The system files are attached.
I recently upgraded my PC with a new solid state drive and to windows 10. I am now experiencing some BSOD (Driver_Power_State_Failure) crashes. I cant say with any certainty but these appear to only be happening once the computer has been in sleep mode for a while. I have attached Zip file ....
Currently I have windows 10 installed, although the problem was persisting even while I was using windows 7. The problems started when I ran out of space on my SSD and tried to bring files over to my other HDD for storage. In the end I threw my hands up and reformatted my Windows 7. And since my SSD was too small to keep everything on last time I decided to install windows on my HDD.
After updating everything and so on my computer, again, decided to BSOD. So I upgraded to windows 10 and eventually it started doing the same thing. I've looked through my device manager and have not located any out of date drivers.