BitLocker After Enabling Boot To Startup Settings
Oct 7, 2015
I enabled the boot to startup settings option in winaero and now my computer boots to bitlocker. I checked online and I don't have the key for it. What can I do? (Computer is surface pro 3 i5 4g of ram)
View 1 Replies
Similar Messages:
Oct 24, 2015
Current Windows 10 (build 10240): I'm trying to turn on Bitlocker on my system drive, an SSD. During Bitlocker's preparation, shrinking the volume, I get error 0x80042574, and Bitlocker enabling will not proceed. The SSD reports 46.5 GB free out of 238 GB, and scanning it reports no errors.
(This is a UEFI system, and the system SSD has a 100 MB EFI system partition.)
View 3 Replies
Nov 16, 2015
My query is regarding a brand new i7 sixth generation computer with Windows 10 Professional, including all the Windows upgrades, and a new Samsung SSD hard-drive.
The reason I bought Windows 10 Professional was for the full hard-drive encryption provided by Bitlocker in case my computer gets lost or stolen, as has happened to me previously. However, I have an ongoing problem with it and can't find a solution anywhere. I have tried to telephone Microsoft's telephone support several times but it has been beyond a joke with their outsource staff in far-flung countries with poor English claiming Windows 10 Professional does not have the option of Bitlocker or any form of encryption to all kinds of other absurdities.
Whenever I start my computer it does not ask me to enter a Bitlocker username or password (I am asked for the Windows password, but, as everyone knows, those are not totally secure and do no protect hard-drive data access). Also, in the Bitlocker section in Control Panel, I am not giving the option to edit a Bitlocker password, even though that option exists in all the other screenshots I have seen on the web.
How can I set my computer up to present me with a Bitlocker password on boot-up?
My system does say my hard-drive is encrypted, but how can I certain of that if there is not even password protection?
Here is what I see in my Windows Control Panel > Bitlocker section:
I note the warning message about rights being restricted to the system adminstrator, but I am the system adminstrator and have double-checked that.
View 9 Replies
Aug 10, 2015
Control PanelAll Control Panel ItemsPower OptionsSystem Settings
Unchecking the "Turn on Fast Startup" command in the above setting path does not do it. There is supposed to be a motherboard software for enabling a normal startup the next time the computer is restarted.
View 9 Replies
Oct 2, 2015
I have only one account with administrative privileges. However, at reboot, Windows 10 starts fresh. It says preparing system.
There are some programs I installed which remain, however, don't save settings. For instance, Mozilla Firefox won't stay default browser, it won't save my homepage, addons won't save. It's similar with other programs.
It seems like Windows just doesn't save settings but loads fresh at ever startup.
View 4 Replies
Oct 22, 2015
No matter what I do the volume setting is always lowered at startup. I hope there's a setting somewhere that I'm missing. Could it be a Realtek setting/problem?
View 1 Replies
Feb 10, 2016
Is it possible to enable 4 way scrolling with Apple Magic Mouse on Windows10? I loaded the drivers from Bootcamp which enables 2 way scrolling. The only drivers I have found that work well are from Parallels on my Mac. Trying to enable the same capabilities on my PC with the Magic Mouse.
View 1 Replies
Nov 23, 2015
I have a brand new HP laptop that came with Windows 10 home installed on it. I have downloaded and applied all updates from MS.
I use a Wi-Fi connection to my Time Warner router. I have everything setup and things seem to be running fine.
Here's the deal.
I thought I would try and use my blue tooth external speaker. (Just to see what would happen.) I enabled Bluetooth.
StartSettingsDevicesBluetooth.
After I move the slider (so the status reads (On), .... I see a message that reads "Your PC is searching for and can be discovered by Bluetooth devices".
Two things happen:
The "search" never seems to end. And I lose WI-Fi connectivity.
I finally, move the Bluetooth slider to the "Off" position and my Wi-Fi connectivity returns.
I "do" see my external speaker. And it does work. (As long as "Bluetooth" is enabled.)
But of course, I then have no Internet connectivity and THAT becomes an issue for me.
View 2 Replies
Jan 17, 2016
My os take 4 minute to start desktop. I reduce the startup programs to 5, but the same problem....
Toshiba L50-C
CORE i7
RAM:16GB
VGA:Nvidia 950 4g
HARD:1T hdd+8 ssd
View 1 Replies
Sep 17, 2015
i want to boot on advance startup option, but everytime i restarted, it just like a normal restart, (settings, recovery then restart) What must be the prblem? i just installed wndows 10 pro.
View 9 Replies
Sep 19, 2015
I would like to enable JavaScript on my computer/Microsoft Edge browser/Google Chrome browser. How am I supposed to do it? What should I do if it is not possible to enable it?
View 3 Replies
Mar 13, 2016
On startup screen: no boot device available
View 1 Replies
Sep 6, 2015
I have a old windows 7 safe mode boot screen that migrated over to windows 10. I works on windows 10 but I don't need it any more so I want to get rid of it. I just don't want to mess up in removing it... I'm using this tutorial... Can't get rid of the dual-boot option on start-up ?
View 6 Replies
Jul 26, 2015
I've been reading that having fast startup on in windows 8/10 can cause issues with dual booting systems with other operating systems installed like windows 7. I have windows 7 on one ssd and going to have windows 10 on a second. Will i have to disable fast startup in windows 10 or any other type of hibernation settings.
View 1 Replies
Oct 5, 2015
1. If I try to select normal startup in msconfig.exe, it doesn't stick; always reverts to selective startup.
2. When I boot to the Windows 10 desktop, it always opens a Windows Explorer window at /windows/system/ which shows only a Speech folder in the right panel.
3. Checking my BootManager using BCDEdit, I see this but I don't understand what the entries mean or whether any of them are connected to the problems 1 and/or 2:
Code:
C:Windowssystem32>bcdeditWindows Boot Manager--------------------identifier {bootmgr}
device partition=C:description Windows Boot Managerlocale en-USinherit {globalsettings}
default {current}resumeobject {657a150b-658d-11e5-99b6-8e17c296bef1}
displayorder {current}toolsdisplayorder {memdiag}timeout 30Windows Boot Loader
[Code]....
View 1 Replies
Oct 28, 2015
Started with a dual boot Windows 7 pro / XP HP Elite 8300. Upgraded Windows 7 to 10 and now it seems to take forever for the boot menu to show up. I can hit restart, it shuts down then just sits there doing nothing for several minutes. No hard drive activity, no video just the power light. Then it looks like it reboots and finally displays the boot menu.
With Windows 7 it went through the normal boot process and displayed the boot menu without the dead-in-the-water pause.
View 1 Replies
Aug 2, 2015
Today I upgraded my Win 7 PC to Win 10. Everything was fine 'till the installation finished and came up with my desktop. it loaded normally for a few moments then a black screen appeared with no taskbar nor the icons only cursor. I can access the Task manger and I tried terminating explorer.exe and restarting it but nothing changes.
View 1 Replies
Aug 24, 2015
I have a Lenovo laptop upgraded to Windows 10. Last night I switched it off but now when I turn it on, it stucks in the startup Lenovo logo. I think that it is a driver issue but I cannot boot it in safe mode to fix it? What can I do? ( I don't mind to lose my files).
View 2 Replies
Sep 4, 2015
Installed MSI's "Fast boot" software, upon restarting every time I am greeted with a bluescreen mentioning it not detecting a device.
MSI Fast boot also seems to increase the time it takes for the mouse and keyboard to start so when it asks "Press enter to Retry, or F8 to change settings" i cannot do anything as the keyboard and mouse are not on.
If its possible to fix this without reinstalling.
View 1 Replies
Aug 2, 2015
I recently upgrade from Windows 7 to Windows 10 ( Build 10240). I had my overclock settings at 4.4 GHz/1.172 CPU Vin (specs listed at the bottom). My computer had no issues prior to switching to Windows 10. However, my computer always crashes and gives me the "overclock settings have failed" error within the first 10 minutes. This seems to only happen during the first boot session of my computer.
After restarting, the computer seems to run fine with no problems. I've tried restarting with default CPU settings and my usual OC settings. My computer runs for several hours with no issues. The issue comes back after I've turned the computer off for a long period of time (~3-5 hours).
I think its a Windows 10 issue, but I'm not sure.
Specs
OS: Windows 10 Pro 64-bit (Build 10240)
Mobo: MSI Z87-G41 PC Mate
CPU: i5-4690k
RAM: Kingston HyperX 8 GB
View 1 Replies
Aug 8, 2015
Nothing changed, nothing installed. Edge stopped working, Cortana stopped working. Mail stopped working. SFC scannow found corrupt files but unable to fix.Reset keep files and settings failed to boot and rolled back. As did remove everything.Stuck with a very broken PC that is filling logs with everything stopped working and was closed.Just defender installed.
View 9 Replies
Oct 8, 2015
I have a client that has a Microsoft Surface Pro. It has a BSOD error code 0xc0000001. I have tried many ways to repair but I am unable to since Bitlocker has locked the hard drive. The client swears they never activated it and does not know the code to unlock. They did not have a microsoft account so I cant go that route. How to unlock hard drive without the bitlocker code?
View 1 Replies
Feb 10, 2016
So at my work and home I have been setting up Bitlocker. Today at work I was setting up Bitlocker on a PC and we could not get a password for a option to unlock the device. The only option we get is to either use a USB or a pin. As per the compliance officer we have to require an encryption passphrase upon boot and I am not big on pins. How do I get my passphrase ability back?
View 6 Replies
Dec 16, 2015
I have read, on the Internet, that Bitlocker can be got into, without using the password, by 'experts using encryption breaking tools.
I use a 13 part password, incorporating upper case & lower case letters, numbers and special (punctuation?) symbols.
So, just how secure is Bitlocker?
View 5 Replies
Mar 5, 2016
I have a usb that has been encrypted using bitlocker, I can connect this usb to my desktop and I can input the password and access the usb. However on my laptop and other computers, when I plug in the usb I do not get the prompt to input my password and instead just says that the drive is inaccessible. Both my laptop and my desktop are windows 10 and I have admin rights on both machines. On both machines I have not used bitlocker, how I can access my usb on normal machines and how I can open my usb on my desktop but not my laptop?
View 2 Replies
Jan 25, 2016
I have tried everything I think, but obviously not.
Cannot open TPM, pop up tells me I do not Have at least 1.2. Cannot open Bit locker until I complete TPM wizard and assign myself as administrator??. then I can open Bit locker and proceed to encrypt my hard drive??
Is there a download for 1.2++ or is it a hardware addition..
View 9 Replies