This morning I tried to login to my windows machine, windows 10 pro, intel i5 3.30ghz, 12gb RAM, 2TB HD. and kept telling me password was incorrect. I then removed windows password thru other admin user, and now all external hd's except for c: drive all lecked by bitlocker. Never installed or activated it.
I have 2 internal sata drives and 2 usb drives locked. I have gone to control panel, bitlocker, and tried to unlock drives, tried to do a search for key id on pc and nothing is found. My raw files are in the backup drives.
Windows Search returning no results on one of my external harddrives. I have already:
Tried indexing the HDD and rebuilding.Non-indexing and rebuilding.Indexing only specific folders on the HDD and rebuilding.Specifically disabling indexing for this drive in the drive's properties.Checked that I have the appropriate permissions on the drive (they are identical to my other HDDs).
Crude example of my problem:
I am looking for the following file, A:Example est.txt.I am inside the A:Example folder.I search for "test", "*" or "txt".It says there are no results.
And it says "no results" instantly - it doesn't appear to even try.
I do not have a second drive with sufficient space to move the contents to do a format - so I'm looking for non-destructive solutions.
After shutting everything that could conceivably be causing the problem down, Event Viewer now says that "System" at PID 4 is preventing any of my USB 3.0 hard drives from ejecting. Now this is strange, because it should not be doing this. I have no applications open, no file explorer windows open, and I closed out every background task that I could.
I do not believe I have a virus. MalwareBytes shows up clean, and there has been no indication of anything wrong.
This issue also occurred in Windows 8.1, and I didn't solve it there either.
I installed windows 10 on a new SSD which is currently my drive C:. There was a windows 7 which was on drive D: but I never uninstall it. Drive D: was working normally until during boot today windows decided to do a checkdisk on drive D: (dont know the cause), which tried to repair it.
Currently I totally cannot access my drive D:. Tried to grant permission to myself to assess it but failed, keep having errors such as this ....
My Maxtor external hard drive is not showing under This PC, but is under Device Manager. Updating the driver comes back as driver is up to date. Changing Bios setting between UEFI and Legacy do not make a difference. Using a different USB port does not make a difference.
I can get full access to the drive if I boot up LinuxMint from a USB stick.
Microsoft says this is a manufacturers driver problem. Acer says this is Windows problem.
I recently upgraded my PC to windows 10 and every since have been unable to access any USB external drive. The laptop picks up the drives and acknowledges that they are there and working but they do not appear in file explorer. I have looked in disk management and the drives are there and healthy. The USB ports work 100% as i have plugged in keyboards etc to test and all the drives i've tried work with other computers. I've reinstalled windows twice. Ran various disk cleanup utilities, checked for hidden drives etc.I need to upload video files to my laptop to edit for work.
I just upgraded from Windows 7 PRO to Windows 10. I notice that my external USB 3.0 drives can't be found. Before the upgrade it was ok. The only external device that does show is a Sandisk FIT USB 2.0 stick.
In recent weeks, it has become impossible for me to safely remove my external drives. (Mostly, I use Western Digital Passports, Passport Ultras, etc).
I am using Windows 10.
I close all of my programs and folders. I get the "busy" message and to try again later. I run Unlocker on the drives, and Unlocker shows no activity or actions that I can take. I bring up my task manager and nothing is running. I try to safely eject from the WD utility and it doesn't work. I try to eject by going to my computer, right clicking on the drive, and ejecting from there. Sometimes I simply wait for half an hour, read some articles, try again. I get the same "busy" or can't shut down message.
I read online that I could try to Device Manager, click on the drive, and under policies select "Optimize for Performance." However, the computer must restart for changes to take place, and when i've tried, I get stuck on an infinite "Restarting" screen.
I read somewhere that I can try to empty a hidden recycle bin on my external, but I can't seem to reveal it?
My new windows 10 only sees my PC - when searching for my files in Explorer, it cannot 'see' my two external drives when I plug them in. I've looked in Device Manager and they are not showing in there either. How can I tell Win 10 to access my external drives?
I thought Win 10 would automatically spot my external drivers the moment I plugged them in? Then it would go search for and install the appropriate drivers - but it isn't doing that..
With Win7 I used to open one external drive, then through My computer locate the other drive. I would have each drive on its own window. I could then select relevant files on one drive copy and paste into the other drive. With Win10 if I click on File explorer I can open one external drive, where can I locate the other drive to put in a separate window. If I click on the other drive, it just opens it in the same window. Win7 and previous versions used to be so simple.
My HP Pavilion all-in-one computer does not recognize my Seagate external hard drive after I installed Windows 10. Everything worked well with the Windows 8 but neither system will recognize the other once I upgraded to Windows 10.
Since upgrading to W10, My puter will no longer load when I have my external hard-drive attached. When I switch on my puter, I get a black screen with the message 'Non-System disk or disk error, Replace and strike any key when ready'.
When I reboot with the ext HD disconnected the reboot is fine and W10 loads no problem. If I reconnect the Ext HD while the puter is up and running, no problem, and both the computer and now attached external hard drive function perfectly.
I have tried reformatting the external hard drive but I still have the same start-up problem when the ext HD is attached on start-up.
After a system refresh of Windows 10 all external disk storage drives, Micro SD and USB are listed twice in file explorer. This is a common problem, reported many times in forums and community support web sites. Could a solution be to reload file explorer. Is this possible and where would I find the download?
My PC performance with Windows 10 is very good except when it isn't
One of the things that is perplexing me is that my external hard drives seem to be impacting my startup performance. Following start up Task Manager performance tab shows one of my external drives (G) working at nearly 100% and the noisy disk drive suggests that it is working hard. The disk transfer rate also indicates movement between the PC and the drive. This is despite Drive G being used only as a storage/backup device with no automated actions configured. Yesterday Drive G became very hot as a result.
If I disconnect Drive G, my second external hard drive Drive F takes its place and task manager shows the same activity as previously shown on G. If both drives are connected F shows no activity.
Before installing Windows 10 I clean reinstalled my Windows 7 onto a new SSD but inadvertently left my BIOS boot drive as my old HDD. Now I find that I have my windows 10 boot files in the HDD and the rest of the OS on the SSD, so I am still dependant on that old HDD. It's quite old, and I tried to swap it out to a new HDD but found this issue.
I've tried BootRec /RebuildBcd, BootRec /FixMbr and BootRec /FixBoot, rebooting the PC between each, but without success. I want to make the SSD bootable, what have I missed?
I have an acer aspire r14 and it only has 1 slot for a HDD. I have bought a brand new SSD, which I am trying to replace the old HDD with. I have an external HDD where I have a system image backup of my windows 10. Since there is only one slot on the motherboard for a harddrive, i will have to take out the old HDD and put the SSD instead. Then my laptop won't have any data on it. My question is, how do i restore my windows 10 from the external HDD, on the new SSD. Does it work if i change boot order and just simply restore or is there something more complicated?
I am making a pc with a NZXT s340 case which does not have any external 3.5" bays. I was wondering if I could istall windows 10 using an external dvd writer which is connected by usb. will the dvd writer register on the PC without an os? Will I be need to change anything in the bios? Also if I have to install it by USB, how do I do it?
I recently have noticed that windows 7 and I just upgraded to windows 10 via the free upgrade, will not show all my hard drives ? On start up they show for a few seconds then go away. Both are WD. One is 500 gb, and the other is a new 1TB. I am not sure when this started but noticed it just recently when I tried to access my pictures on the 500gb drive. I have tried just about everything here with no luck. The 500gb drive does have a windows vista OS on it but the 1 TB is just for back ups etc. All was fine some time ago but now, all I see is my SSD with my OS and an external drive. Also the Hard Drives do show up in Bios. I might have found a reason this happens. Most likely on a windows and / or driver update. On my system the drivers for these missing Hard Drives you can see them in device manager by selecting view / show hidden devices.
I upgraded my pc from windows 7 to windows 10 but i want to move windows to a external storage device. So can I move it to the storage device somehow or do I have to downgrade back to windows 7 then redo the the upgrade process but choose option that saves it to a external storage device? Are either of these possible and how do I do either?
After several hours on my pc i open a windows explorer window and this comes up;
Now if i open up a new explorer window on top of that this comes up;
If you notice the icons are gone, if i close both windows and open a new one it starts over from the top.
Other issue is if i click on properties on files like images no property window comes up, i bet there is more but this just happen an hour ago. Everything works apart from that, bluetooth headset, games, videos, browsers, email etc. and... windows search doesnt work, doesnt turn out any results even if i search for something like notepad
I currently have Windows 7 installed on a 128 GB SSD (C drive), which also houses my more "essential" programs and the Users folder.
I also have a 1 TB HD (E drive) which I installed the rest of my programs on (though, the registry still remains on C) and also contains most of my personal data. I moved the My Documents, My Music, etc. from C to E.
If I decide to upgrade to Windows 10, will the installer detect that I also have programs on my E drive? Or does it only look at the primary drive, my C drive?
plugged in USB thumb drive opened windows explorer right clicked drive scan with windows defender and it said scanning pc but it never shows any options so I dont know if it scanned pc or usb for sure why or not
My Windows' acting up, tried every trick in the book to fix it and no dice, so I'm taking the easy yet bothersome route of reinstalling everything. Again.
But Windows 10 has a "Reset this PC" option under Settings > Update & Security > Recovery (screen cap for clarity) which in practical effects, it's what I need, but faster and less bothersome.
Problem is, I have more than one (physical) hard drive on my system, and I don't know if Windows will restrain itself to formatting the system drive or if it'll format all drives present.
And I'd rather ask a relatively dumb question than risk losing all my backed up data XP.
I have a client that has a Microsoft Surface Pro. It has a BSOD error code 0xc0000001. I have tried many ways to repair but I am unable to since Bitlocker has locked the hard drive. The client swears they never activated it and does not know the code to unlock. They did not have a microsoft account so I cant go that route. How to unlock hard drive without the bitlocker code?
