Black Screen Without Curser
Aug 6, 2015
I just got free update and after completing the upgrade display icons and fonts were faded then i downloaded the nvidia driver for windows 10 64bit. Then i installed it and reboot the pc and now i ended up with black screen. After long hours wait it got me the main screen desktop itself. Then i shut it down and start it again in the morning then black screen came up again without cursor. After almost 3/4 hours wait screen got windows 10 logo only on screen and i pressed Alt+Ctrl+Del and it boots i got boot screen and then black screen again. How to get my pc on with windows 10 or if i get it on i roll back.
View 3 Replies
Similar Messages:
Mar 16, 2016
I am working on the Co-owner of my place of employment. Today when doing some maintenance on her Lenovo x1 carbon it upgraded to the Win 10 pro from home on it's own, once this completed and restarted it will boot up to where I can access the bios or recovery, but the normal boot just displays a black screen with the curser and circle blinking. Unfortunately the bitlocker has been enabled and she does't have the recovery key so booting to safemode or even resetting isn't an option. I can access the command line through recovery but have no access to the c: since it is locked. I have run FRST64 and comeback with the common things like C:windowssystem32winlog.exe is missing..
View 2 Replies
Aug 27, 2015
I upgraded from windows ultimate to windows 10. my computer boots through everything and finally brings up my old windows 7 desktop screen and then everything goes black, but mouse shows up on black screen. Is this a driver problem with windows 10? However, before the black screen appears the new start button and screen appears as the windows 10
View 1 Replies
Jan 18, 2016
I did a bit of research and this seems to have been an issue for a while, or has been in the past. Was upgrading to windows 10, I first had to restart my pc cause it was initially stuck on that preparing to install problem with the green bar being stuck around 25%.
It then got through that and began the installation process with the big circle and rebooting process. However around 91% when I last looked at it it was just black screen, this stayed this way for about 3-4 hours. I then decided to reboot the pc and it has now booted to the login screen. Is this a known bug or could there be a possible issue?
The problem seems a bit different as some people I saw have had to fall back on PC restore points etc. So not sure if it installed or what could be the problem.
Also side note, I upgraded my pc when windows 10 first publically released, but rolled back because I had about 5min shutdown times.
View 2 Replies
Oct 10, 2015
I have a Lenovo Thinkpad Edge with an Intel I5 processor, 64 bit with no hardware upgrades (stock). I had accidentally stepped on the screen (fell off my lap and then crunch) which was mangled beyond repair, so I have been using it similar to a tower, with a VGA and/or HDMI connected monitor (my HDMI cable went bad, I picked up a new cable but hadn't hooked it up to the second monitor. I started my free upgrade from Windows 7 Home Premium to 10 last night. I woke up to the black screen/mouse pointer issue which is what brought me to this thread. I tried the recommended fix:
1. Hit ctrl, type in password and enter
2. Win Key + P + Down Arrow. (Win Key + P only seems to do the same thing)
This brought up options to
1. Disconnect projector (Tried this and lost connection to the VGA even after reboot)
2. Duplicate (Screen is still black with mouse cursor, but I saw a little bit of red and blue pixels at the bottom where the task bar should be until I disconnected and re-connected the VGA, then it was back to black screen and cursor)
3. Extend (still black screen and cursor)
4. Connect Projector (still black screen and cursor)
I'm not sure what to do. I must have some OS installed, because I am able to also perform these operations from my USB Keyboard/Mouse. I'm just not sure how to get Windows back on my VGA connection (I haven't tried HDMI because I did not have it connected when I ran the update.) I thought Duplicate displays would do the trick, but apparently not. For as beat up as the laptop is on the outside, the hardware performs fine. I also have a 2nd laptop (work laptop, also a Lenovo W541) that I can use if any solution involves downloading something bootable.
View 1 Replies
Jan 13, 2016
When I boot up my computer (to windows 10). It will do the Asus splash screen then instead of going straight to windows if does this black screen with the kinda terminal thing (with no writing/text) then goes on to windows. Does this affect my computer?
View 1 Replies
Jan 2, 2016
win10 after showing logo black screen take 2 to 3 mintus to show welcome screen. amd radeon dual graphic card 7400+6310 driver amd site shows it a latest updated driver ...
View 2 Replies
Jul 31, 2015
Okay so I updated from windows 7 to windows 10 i have these black bars around my screen instead of a full screen so I tried changing the resolution because it was set to 800x600 so I change it to 1920x1080.
View 1 Replies
Aug 1, 2015
The black screen occurs before login screen. It happens randomly. I have to move the mouse (haven't tried pressing keyboard) and it will show the login screen and windows will continue normally. On my device driver it shows only 1 display adapter that is NVIDIA GTX 970. My motherboard is H87-PLUS and its specs shows that it does have an Integrated Graphics Processor.
Tried installing Intel Graphics Driver but just shows 'This computer does not meet the minimum requirements for installing this software.' Tried disabling the lock screen too but its not working. Tried putting PCI-E as the default graphics in BIOS but its not working either. how could I prevent the black screen from showing up again?
View 4 Replies
Mar 5, 2016
After log on I get black screen,I can get into task manager.Is there a way to restart computer in safe mode from task manager new task?
View 1 Replies
Sep 28, 2015
the last two times I have been getting a black screen it says to close other programs but I cant do it?
View 3 Replies
Mar 5, 2016
I don't know what to do. I've tried everything. I am literally about to break down crying. I've been at this for six and a half hours now. I've completely run out of space on my 320GB hard drive, and I've been trying to clone to my new 1TB since I got home from work.
I've currently got windows 10 on a small HDD that I need to transfer to my newer, bigger drive. I do have multiple hard drive slots, as I need the OS on the big one. Don't ask why, it's complicated. Point is, I can't use the little one anymore and I need the OS as well as my files on the big guy.
I've tried 2 different cloning programs, each one taking ages to finish copying. The problem is, everywhere I go says the reason I have blackscreen when I try to boot is because I'm missing the 100MB hidden boot partition. But it's sitting right there.
I've tried booting with only the new HDD installed, tried 100 boot and BIOS settings, different slots, completely formatting the new HDD and starting over from scratch with the same program and a different one.
I've even tried booting from a recovery disk. That won't work either, and gives me the same black screen with a single horizontal bar blinking in the top left corner.
View 5 Replies
Sep 6, 2015
When I boot my pc sometimes I get a black screen. But by pressing ctr alt & delete I can log out, and then login and its then OK. I have reset my pc but its still the same.
View 4 Replies
Jul 30, 2015
If you have an on board Intel graphics controller as well as an add on graphics card, windows thinks you have one more monitor connected than you actually have. so when windows loads its outputting the video signal to a bogus monitor.firstly wait long enough so the mouse cursor to appear when you move the mouse.(blank screen with a white mouse cursor).Then press the space-bar and enter your login password or pin (yes your doing this blind)
You should now be logged into windows.if the desktop dose not appear after 30 seconds then press WindowsKey-P down arrow twice and enter.
View 9 Replies
Jul 22, 2015
So.. I screwed up.. I used a small program called something like Windows 10 Login Background Changer (something along those lines) and when I restarted my computer, it never reached the login screen. I can move the mouse and open Magnifier (was pushing random controls), but I don't know how to get past here.
View 7 Replies
Jan 15, 2016
I downloaded windows 10 on my laptop today and now I have a black screen. I have shut down my laptop and restarted it and the windows emblem comes up then goes to black screen again.
View 1 Replies
Dec 3, 2015
i've just upgrade to windows 10 nd am facing black screen with cursor
View 4 Replies
Dec 15, 2015
I have acer aspire 5740 laplop, core i3 ..... A problem occured extending c windows drive as described below. It have 3 local drives
c - 20gbboot primary drive
d - 90 gb system , primary drive
e - 50 gb logical
Some unallocated space, I was extending c ,by deleting drive d ,at the deleting drive it, gives warning, that if you delete drive d , may your system not get start, i deleted, sudden restarting windows, displaying operating system not found, i tried to install new windows, no booting, after 2 trial, it showing black screen , i have tried some soln as per knowledge ram reset, ms dos boot usb drive. but nothing happened, laptop get normal heat, felt like hardrive boot.
View 1 Replies
Mar 5, 2016
Computer boots to windows log on,have no password here.After a minute on log on it go to a black screen,stays there forever. I can get to Task Manager from black Screen,lost on what to do next. Just want my Windows 10 back, not sure what caused this problem.
View 9 Replies
Oct 22, 2015
During boot up I get a black screen for about 1 min then the login for my account. I notice a lot of hard drive activity during the black screen. I'm using amd-catalyst-15.10beta-64bit-win10-win8.1-win7-oct12.exe (latest one).
Win 10 works fine except for the black screen. I've had this black screen since day one but it seems to be longer.
I have tried AMD 15.7.1 driver.
I don't have an on board graphics.
I'm almost thinking of grabbing another hard drive and do a clean install and see if that fixes it.
View 9 Replies
Nov 28, 2015
I just updated to Win10, and now whenever I charge my computer the screen goes black.
I tried this:
1) Press Windows + X keys on the keyboard and select Control Panel.
2) Type Troubleshooting in the search bar on the Control Panel.
3) Click on View all on the left navigation pane. Click on Power.
4) Click on Advanced on the power troubleshooter dialog box and click on Run as administrator (Enter the credentials if required).
5) Click on Next and follow onscreen instruction complete the Power troubleshooter.
But that didn't fix the problem.
View 1 Replies
Nov 27, 2015
when I log into my computer the screen becomes black for about 3 to 5 minutes.
View 1 Replies
Dec 26, 2015
I cant find a fix to my computer with my Nvidia graphics card here's what happened.
- Windows 8.1 update to windows 10 happens.
- Successful upgrade so i start up games to see changes into fps.
- Graphics card is not working so i uninstall them and try to reinstalled them again but to no avail ( should have restarted my PC i know).
- Get message to start restart on safe mode and so i do so.
- Suddenly I receive a black screen to which after many attempts to fix it via online including the installation media flash drive and the start+P key bind whatever thing.
I am not able to play my games, talk to my family and study for my ISU for my school which i need now because the work is inside! I need to fix this but am running out of options.
Also i wouldn't say am bad with computers I do know how to get to control panel, run commands on cmd, etc. But some detailed course of action explaining what do would useful.
Any link on how to downgrade to windows 8.1 or even 7 would be useful but not necessary, don't want my computer updating something I don't know.
View 2 Replies
Oct 14, 2015
Upon start up of my PC it loads up then the screen goes blank, like its in sleep mode, no mouse nothing, if I turn the monitor on and off, the screen appears for a second or two then disappears again.
I tried restarting in safe to check drivers but it does exactly the same thing here. In safe mode however, under monitors Generic PNP Monitor has the Yellow Exclamation mark indicating an issue. I have tried uninstalling this and also my graphics drivers and it seemed to work for the first time. Next day I turned on my PC again and the same thing is happening. I have to constantly turn on and off my monitor so I can navigate to the relevant areas to uninstall drivers etc.
I have tried a Google search but everything I have read has said something about having a mouse pointer on a blank screen but I do not even have that.
My graphics are built in, not a separate card which the driver for this is labelled Intel HD(R) Graphics. Unfortunately I do not have access to another monitor to check to see if the monitor is faulty. Just to add, this just started randomly before a fresh Windows 10 install.
View 4 Replies
Oct 14, 2015
Recently my computer as began to crash into black screen with only my mouse visible, when I try to restart my laptop it comes up with the Acer logo then when it should go to the login screen it just black screens with mouse
View 2 Replies
Feb 16, 2016
Okay so I was just doin my regular thing on my new pc I got for my birthday and like, the screen suddenly goes black? Idk I can see the cursor still but it'll flicker white every few seconds...
Every few ten seconds a message'll come up saying stuff like "error code: (number) this program has not responded[...] terminate?" And I've clicked "okay" a few times but it hasn't done anything
View 1 Replies
