Black Box Appears And Disappears After Installation
Aug 29, 2015
A black box appears and quickly disappears while I am online, after installing windows 10. It appears on the left side of my screen. It causes sites that I am on to close, and will also make the things I am typing disappear.
Since I upgraded to windows 10 and a new cheap ram 4 gb I have had this problem where the explorer.exe process refreshes.
It is the same thing that happens with android smartphones when you have open to many programs and when you try to go to home everything disappears and appears again because it is refreshing the home process.
Or used to happen with window 7 or 8 where everything disappears and you had to open explorer from task manger to continue to use the computer again if you remember.
Now this happens when i am using chrome because that is all I do on the computer and chrome is known for eating ram and the ram is constantly over 60% .
This happens too frequently it is not one of those things that happened once in a while like it would with windows xp 7 or 8.
These are my theories but I still don't know what cause this.
Do i need to add more ram or is this a bug from windows 10 ?
Edge appears when I click on it--or something does--then immediately disappears. Is there a way to reinstall it? or correct this behavior? I recently had huge problems with setting permissions and to solve them I restored to an earlier restore point.
I can't get Win10 build 10049 to install my Canon Pro9000 Inkjet printer. It is connected by USB and when I turn it on, an icon appears in the taskbar briefly and then disappears. Devices show Inkjet printer but no drivers available. I downloaded latest driver from Canon site and tried again following their instructions. No joy! My Lexmark 250dn installed automatically and so did my Canoscan 8800F as well as my Canon MP490 with no problems. I have also tried compatibility mode using Win8.1 and Win7Pro.
Upon start up of my PC it loads up then the screen goes blank, like its in sleep mode, no mouse nothing, if I turn the monitor on and off, the screen appears for a second or two then disappears again.
I tried restarting in safe to check drivers but it does exactly the same thing here. In safe mode however, under monitors Generic PNP Monitor has the Yellow Exclamation mark indicating an issue. I have tried uninstalling this and also my graphics drivers and it seemed to work for the first time. Next day I turned on my PC again and the same thing is happening. I have to constantly turn on and off my monitor so I can navigate to the relevant areas to uninstall drivers etc.
I have tried a Google search but everything I have read has said something about having a mouse pointer on a blank screen but I do not even have that.
My graphics are built in, not a separate card which the driver for this is labelled Intel HD(R) Graphics. Unfortunately I do not have access to another monitor to check to see if the monitor is faulty. Just to add, this just started randomly before a fresh Windows 10 install.
I made the update today. Finally windows starts up, desktop appears but everything went very slow. I decided to make a restart. So far "so good".
After restart, after login screen, it has a black screen and nothing happens. If I move the mouse it will show it. The black screen remains. I try to go to safe mode, with shift + restart. Not working either. What can I do??
My computer went to a black screen again after installation, but after waiting for a while my computer fell asleep and I went to wake it up and the black screen was gone. I still get the black screen after I restart, but I just press the power button on my laptop, put it to sleep and then I press some button (any) and it's fine.
From what I've read on Windows 10 upgrade and updates it appears to be a huge file, about how much time should I expect ti to take for a complete download?
Using a generic machine, Intel core i5 processor, 3.4ghz, 6mb quad core, Asus P8B75-V M/B. 4GB Ram.
Each time I'm ready to hit the UPGRADE button I read another post which gives me pause and then wait for another "positive" post. Have a clone disk and image disk - so I guess we should be set.
When I try to install windows 10 into my newly built pc, everything goes normally... then it says that the pc need to reboot, and it does. After the reboot, the windows logo appears and it brings me back to the windows installation process.
I've tried downloading and installing Windows 10 via the System Update for the past 24 hours (I've tried it 5 separate times). Every time it gets to 84% overall, and 36% configuring settings, then goes to a black screen with nothing on it (including no cursor) and almost no HDD activity. This has happened all five times.
Windows 7 Ultimate 64bit SP1 Intel Core i7-2600 CPU 16gb Ram AMD Radeon R9 380 Series Single monitor
Upgrading from windows 7 to 10, started install at around 10:30am and left it....around 2:30pm it started the large circle with the % in the centre, and again left it for another hour or so and came back to a black screen, no cursor or anything.
I waited until about 7:30 and still nothing and did a reboot by holding the power button down. On restarting, I get the windows 10 logo with the spinning dots, and then it cuts to black with no cursor. The CPU light does what it would usually do on startup, and when it first cuts to black but then the screen seems to change to a different black (if that makes sense?!) and the light only blips extremely quickly with a long period before it blips again
i know this is another update gone wrong post but I can't seem to find any with the same problem, just similar ones. I've read it can take a long time, but it's been nearly 11 hours and is very frustrating!
i'm not mega pc savvy, I get 2 options when I boot, and I've looked and there's no option for me to do a safe boot, or to revert back go windows 7. If I leave it on black screen for too long it automatically goes into sleep mode.
I've been having some issues to get Windows 10 installed. I've got an ASUS ROG G20AJ desktop computer running an i7 processor and a GTX 760 graphics card. I got my Windows 10 update and everything went fine, and the installation process began. The problem is, when it gets to the 32 % of"Installating drivers and features", the screen goes black and I can only see the cursor. The installation process won't complete and it's been like 8 hours now. What should I do??
Installed the 'Windows 10 Login Screen Changer' that I found on this forum, clicked 'change background' and bam...black screen. I turned the computer off and on again and still black screen with a Cursor.Ctrl Alt Del does nothing. My keyboard still lights up, and pressing Windows + P brings up the project menu but doesn't solve the issue. Forgot to mention I'm running the newest build of Windows 10 and have been for several weeks without any problems.
I just attempted to install Windows 10 on my new PC. During the upgrade process, the screen went blank @ 75% and didn't come back. There was active HDD activity, so I waited until it stopped before restarting the PC.Upon restarting the PC, everything went fine and I got the "Hi" messages and so on. After that, the screen went black again and didn't come back.
After waiting, I forced-shutdown the PC and turned it back on. Windows logo appeared and everything seemed fine. Login screen appeared and I could login. After that, the cursor froze and the screen immediately turned black - and it stays that way. What's wrong?
I'm currently using a secondary PC and may have to go back to Windows 7, but I can't seem to interact quick enough to get to the option that allows you to revert. It freezes and goes black before I can.I tried tapping F8 on boot but nothing happens, it goes straight to Windows logo.
It happens everytime I try to upgrade windows 10, I have tried loads of different methods but none seem to work.
The C:$Windows.~BTSourcesPanthersetuperr.log is as follows:
Code: 2015-08-02 21:50:42, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session 2015-08-02 21:50:42, Error CDiagnosticsHelper::SetSQMDatapoint: Attempting to set a datapoint in an invalid SQM session
I installed Windows 10 yesterday and I had kept my laptop on power and I went away for a bit and when I came back a couple of hours later, my laptop's screen was black but the lights on the laptop blinked so as to show that it had just restarted. So I waited for it to start, however the screen is black and there's absolutely nothing happening.
I googled the problem and found that people could see a cursor or a pointer on their screen but it's not coming for me. Also, my laptop is a 2 year old Dell Inspiron 14z. I need to access my computer, I have to travel in a week. Also, I was updating from Windows 8.1 to Windows 10, and I don't have any CD for Windows 8 as it came pre-installed with it, with the shopkeeper telling me that Windows 8 comes installed in the BIOS so there's no CD. Anyway, I really need to access my laptop asap? I have got absolutely no clue as to what I should do.
I was in Windows 10 setup using the Media tool. I have reached the step where it restarted then a big circle came up with three parts under saying like "Copying Files" and other two things. Then, suddenly it restarted and only a black screen was there. No cursor, sounds, screen. Now I am installing Windows 10 again but fearing the same will happen again. This is NOT a black screen at the log screen; I have not even finished the installation yet and get a black screen.
I tried upgrading my windows 7, but failed 5 times.
step 1 on copying files are 100% step 2 installing features n updates are 100% step 3 FAILED, it stuck on black screen and freeze, nothing i can do besides force restart and its restored to my windows 7 back.
It's always stuck at 75% step 2 and when go to step 3 is freeze ( 5 times in row, I'm thinking give up or buy new laptop with windows 10)... I'm currently downloading ISO file to blank DVD hopefully it's works....
So like a lot of you, I wanted to upgrade my laptop to Windows 10. But when the laptop was in the middle of installing Windows 10 and had restarted a few times, as it does during the installation, it suddenly went black screen with NO cursor or anything. It has been like this for 2 days now, and I don't know what to do.
I can clearly see that the laptop is still on and "working", so it has not just shut down. I'm afraid to force the laptop to turn off, because it's in the middle of a system upgrade. So I'm wondering if there are any alternative solutions or is my only option to force the laptop to shut down and then restart it and hope for the best?
I downloaded Windows10 two nights ago, the download seemed to go well until it came time logging on. I was able to enter my password, pressed enter and got a black screen rendering my laptop useless.
When I go to repair Windows 10, I put in the install disk, it goes to the windows logo with the dots spinning around at the bottom then to a black screen. I left this for 1 hour and it did not progress. The disk also seems to have stopped spinning. The disk works in other computers.
a few days ago I installed Windows 10 from Windows 7. All was OK, so far. I have an Adobe file in my desktop. But the icon showed is always black (no thumbnail) since Windows 10. (see image attached) So I clean both icon and thumbnail caches, and increase the Max Icons Cache for Explorer to 4096.
But without success. After rebooting Windows 10 the right thumbnail is shown, but after few minutes the thumnail is black again.I use a Laptop COMPAQ CQ58, 32-Bit Windows 10 Pro, 4GB RAM
So i tried updating my computer from windows 8 to 10 and last night and it froze at 75% and configuration settings 1%, i let it sit there all night but it still was at 75%. I had read that people where having the same problem and that itll revert to windows 8.1 after you reset it so i did. To my surprise it booted as windows 10 and allowed me to log in but after i logged in my computer black screened without a cursor. I reset it several times but the same problem kept occuring.
Just installed Win10 on a Win7 machine. Started it up and walked away.
Came back 3hrs later and all that was on the screen was this message:
Cannot Display this Video Mode. Optimum Resolution 1280 x 1024 60Hz
I can restart the machine and the normal Dell start up stuff happens. The Win10 logo comes up and then the screen goes black with the above message. No cursor. No nothing.
I cant even get the monitor settings to function once the black screen appears.
I can get into the monitor settings during boot up but cant make any changes before the black screen comes up.