Black Screen Of Death A Few Minutes After Working Normally
Aug 17, 2015
Since I installed Windows 10 on my HP Pavilion laptop it boots up OK and I can get as far as my desktop. The taskbar settles in nicely and all seems fine.
But if I open any application and work on it for a few minutes the taskbar and everything else suddenly disappears. I generally can't close whatever programme I'm in but if I do manage to then instead of a desktop I have a blank black screen. Moving the cursor around is possible but there is literally nothing to open.
My only option is to ctrl/alt/delete for Task Manager and then shut down or restart. On restart, the same thing happens. It starts, I get to the desktop, everything looks normal, I open something then black-screen-death.
I am not using two screens.
View 6 Replies
Similar Messages:
Oct 22, 2015
I installed windows 10 and it seems great, except every now and again it restarts out of nowhere. Then it will go into this loop of restarts with this screen I've captured and then restart again. Today the computer was in sleep mode and I started using it for 10 minutes then bam, black screen of death restart loop. It will show these white boxes at the top of the black screen then restart again. I have a photo but I don't see how to upload here.
View 5 Replies
Jan 2, 2016
win10 after showing logo black screen take 2 to 3 mintus to show welcome screen. amd radeon dual graphic card 7400+6310 driver amd site shows it a latest updated driver ...
View 2 Replies
Nov 27, 2015
when I log into my computer the screen becomes black for about 3 to 5 minutes.
View 1 Replies
Sep 21, 2015
I have freshly formatted my computer, installed all the updates and drivers, I have also RMA'd my video card (which i thoroughly tested and found it works fine on other computers.) but I cant figure out why my screen goes black but the computer keeps running. I can hear my music still playing and I run a dual monitor setup but when my screen goes black both monitors keep bouncing around the "Analog / Digital" box and thats all i can see, i have tested the monitors on other computers and they work fine as well.
View 9 Replies
Nov 23, 2015
I just installed 10 and everything installed properly. My apps work fine. My problem is five minutes after everything loads and the Desktop is populated I get the black screen and cursor. If I am working in a app l.e. Mail, the app stays up but the desktop, task bar etc. and everything else goes into black screen. if I close the app then I have nothing.
View 4 Replies
Apr 25, 2015
Today I installed Windows 10 TP on my old HP Touchsmart tm2 laptop. First it all went well, I was able to log in and search for updates (iso is the first build). But after a few minutes the screen went of for about 3 seconds (black) and came on again only to turn dark again, come back and turn dark again. There it stopped. It's not totally dark, back lighting is still on I think.
It actually felt like the laptop tried to switch to an external monitor 3 times until it finally managed to find one. But there is no external monitor connected! I tried to restart the pc several times but luck. I only get to the windows logo, after that I get a dark screen instead of the login screen. I also tried to actually connect an external monitor via VGA but it shows the same dark on the monitor.
I reinstalled Windows 10 TP and it all went the same way again. When I tried to start in safe mode, I was able to login but couldn't open any apps/programs, not even the start menu. Ctrl+Shift+Esc finally worked and I could then run explorer.exe and get to the control panel. How I can get this laptop to work properly.
View 1 Replies
Jan 21, 2016
For the last 3 weeks anytime I "restart" my hp 32 bit pc it takes 6 minutes and all the while the screen is black with a small blinking light in the upper left corner everything is fine after it finally restarts and if I shut it down and start it back it starts normally and in the morning when I first start it up it starts normally it just happens any time I restart it for any reason.
View 7 Replies
Aug 12, 2015
Valid windows 7, sit back and relax message on the install, then blue screen of death and error loop, No support from Microsoft. Off to local computer store to see if they can get this fixed or off of my PC..... way to go Bill - no wonder the upgrade was free.
View 1 Replies
Jan 21, 2016
Usually when I go to work in the morning I leave my desktop PC on. When I returned home last night I was greeted with the Windows 10 blue screen of death with the sad emoticon.
It instructed me to look up the error UNEXPECTED_STORE_EXCEPTION. I rebooted my computer and googled this error and followed recommendations. This morning, I again left my computer running before I left for work, although on this occasion I ran a number of antivirus and antispyware scans. When I returned home tonight I was again greeted with the same Windows 10 blue screen of death. This time it included the error "critical process died".
I attempted `system restore', however this only gives the previous day restore points when there should be more.
From what i can gather, Windows 10 is deluged with problems and I am considering going back to to Windows 7.
View 6 Replies
Aug 13, 2015
I upgraded from W7 to Win 10, i've had like 8 Blue screens of death since I updated.
Here is a link to my minidumps, i ran a CClean, so it got rid of some of my dumps, but there is a couple here: [URL]
View 1 Replies
Sep 3, 2015
Randomly getting a BSOD while gaming, or sometimes at complete random. What this dmp file points too? tried to do some research on the hal.dll driver, no specific luck on what could cause it.
==================================================
Dump File : 090315-59843-01.dmp
Crash Time : 9/3/2015 6:33:19 PM
Bug Check String : SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
Bug Check Code : 0x1000007e
Parameter 1 : ffffffff`c0000005
[Code
View 1 Replies
Oct 24, 2015
the error is "Driver_irql_not_less_or_equal"
Im running x2 gtx 970 on SLI
i5 4690 on a z97x gaming 3 mobo
8gb ddr3 2133mhz ram.
Now i never got any of this on windows 7, i upgraded whilst keeping files and stuff, and i figured the driver was calling this, now i completely uninstalled nvidia software and all the drivers on device manager, then scanned for them and re-installed windows 10 64bit versions of them on freshly, now it continues to happen, if i have multiple tabs of videos on my pc crashes giving me that message.
View 1 Replies
Aug 27, 2015
I upgraded from windows ultimate to windows 10. my computer boots through everything and finally brings up my old windows 7 desktop screen and then everything goes black, but mouse shows up on black screen. Is this a driver problem with windows 10? However, before the black screen appears the new start button and screen appears as the windows 10
View 1 Replies
Nov 10, 2015
The first win 10 upgrade worked well on my Packard Bell Easynote TS11SB laptop, but the next upgrade REALLY SLOWED DOWN the startup process. Now 2 minutes. I've tried the highly unintuitive disable quick boot up trick to no avail.
View 5 Replies
Aug 30, 2015
On one of the Windows 10 systems here (upgrade followed by reset) all applications including the desktop become unresponsive for up to 20 minutes or so with the "spinning doughnut" mouse pointer displayed. During this entire period, something is hammering away on the hard drive.If I leave it long enough, the hard disk stops churning, and everything wakes up again.
Clearly some process has locked out all application screen updates (why?) while it does something to the hard drive.There are no entries in either the Application or System event logs that match up with the times that this has happened.The only common factor is that on several occasions I've had a VMware virtual machine running, but I don't think that it is every time.
Graphics card is an ATI FireGL V7600 sfc /scannnow thinks everything is OK.
View 1 Replies
Dec 15, 2015
I can not get my pc to follow my Power and Sleep settings. After 5 minutes of inactivity, the screen is blank and I have to wake it and login.
View 6 Replies
Aug 2, 2015
I have updated my desk top with no problems and have set it to sleep after an hour, however it still goes to sleep after 10 minutes. It then sits with the blue sign on screen with no account pic or sign in box for ages before going to a blue screen which flickers for a few seconds before giving me the sign in options. I have tried adjusting all the power saver options to no avail!
View 5 Replies
Oct 19, 2015
Ok, I have read several people having problems with the sleep/power save modes.
I have a similar problem. I can't keep my screen from going blank. Now what I have done is I went into the power save and sleep modes and had everything set to "never" including "none" on screensaver. Well in 5 minutes the screen goes blank but the computer, drive and my previous items & webpages are right where I left them. I also tried setting the time the display goes to sleep for 30 minutes and it stills goes into blank mode in 5 minutes. My assumption is, no matter what I set the power/save and screensaver to it still goes into a 5 min no activity screen blank.
Computer is a HP ENVY dv7, AMD A10,Quad core with 16Gb mem; 650Gb drive. Previous OS Windows 8.1. All drivers were updated to latest before update to Windows 10.
View 1 Replies
Oct 19, 2015
After upgrading to Windows 10 on an acer gaming notebook, the screen is blinking when booting and it takes 10 minutes to load windows.
Everything is okay when the system has started...
This happened to a friends laptop, just got it now.
View 1 Replies
Jan 18, 2016
I did a bit of research and this seems to have been an issue for a while, or has been in the past. Was upgrading to windows 10, I first had to restart my pc cause it was initially stuck on that preparing to install problem with the green bar being stuck around 25%.
It then got through that and began the installation process with the big circle and rebooting process. However around 91% when I last looked at it it was just black screen, this stayed this way for about 3-4 hours. I then decided to reboot the pc and it has now booted to the login screen. Is this a known bug or could there be a possible issue?
The problem seems a bit different as some people I saw have had to fall back on PC restore points etc. So not sure if it installed or what could be the problem.
Also side note, I upgraded my pc when windows 10 first publically released, but rolled back because I had about 5min shutdown times.
View 2 Replies
Oct 10, 2015
I have a Lenovo Thinkpad Edge with an Intel I5 processor, 64 bit with no hardware upgrades (stock). I had accidentally stepped on the screen (fell off my lap and then crunch) which was mangled beyond repair, so I have been using it similar to a tower, with a VGA and/or HDMI connected monitor (my HDMI cable went bad, I picked up a new cable but hadn't hooked it up to the second monitor. I started my free upgrade from Windows 7 Home Premium to 10 last night. I woke up to the black screen/mouse pointer issue which is what brought me to this thread. I tried the recommended fix:
1. Hit ctrl, type in password and enter
2. Win Key + P + Down Arrow. (Win Key + P only seems to do the same thing)
This brought up options to
1. Disconnect projector (Tried this and lost connection to the VGA even after reboot)
2. Duplicate (Screen is still black with mouse cursor, but I saw a little bit of red and blue pixels at the bottom where the task bar should be until I disconnected and re-connected the VGA, then it was back to black screen and cursor)
3. Extend (still black screen and cursor)
4. Connect Projector (still black screen and cursor)
I'm not sure what to do. I must have some OS installed, because I am able to also perform these operations from my USB Keyboard/Mouse. I'm just not sure how to get Windows back on my VGA connection (I haven't tried HDMI because I did not have it connected when I ran the update.) I thought Duplicate displays would do the trick, but apparently not. For as beat up as the laptop is on the outside, the hardware performs fine. I also have a 2nd laptop (work laptop, also a Lenovo W541) that I can use if any solution involves downloading something bootable.
View 1 Replies
Jan 13, 2016
When I boot up my computer (to windows 10). It will do the Asus splash screen then instead of going straight to windows if does this black screen with the kinda terminal thing (with no writing/text) then goes on to windows. Does this affect my computer?
View 1 Replies
Jul 31, 2015
Okay so I updated from windows 7 to windows 10 i have these black bars around my screen instead of a full screen so I tried changing the resolution because it was set to 800x600 so I change it to 1920x1080.
View 1 Replies
Aug 1, 2015
The black screen occurs before login screen. It happens randomly. I have to move the mouse (haven't tried pressing keyboard) and it will show the login screen and windows will continue normally. On my device driver it shows only 1 display adapter that is NVIDIA GTX 970. My motherboard is H87-PLUS and its specs shows that it does have an Integrated Graphics Processor.
Tried installing Intel Graphics Driver but just shows 'This computer does not meet the minimum requirements for installing this software.' Tried disabling the lock screen too but its not working. Tried putting PCI-E as the default graphics in BIOS but its not working either. how could I prevent the black screen from showing up again?
View 4 Replies
Mar 5, 2016
After log on I get black screen,I can get into task manager.Is there a way to restart computer in safe mode from task manager new task?
View 1 Replies