Black Screen On Boot Up?

Oct 14, 2015

Recently my computer as began to crash into black screen with only my mouse visible, when I try to restart my laptop it comes up with the Acer logo then when it should go to the login screen it just black screens with mouse

View 2 Replies


Similar Messages:


Computer Show Asus Splash Screen Then Instead Of Going Straight To Windows Black Screen Appear On Boot Up

Jan 13, 2016

When I boot up my computer (to windows 10). It will do the Asus splash screen then instead of going straight to windows if does this black screen with the kinda terminal thing (with no writing/text) then goes on to windows. Does this affect my computer?

View 1 Replies

PC Won't Boot At All - Black Screen

Sep 10, 2015

CPU/GPU: AMD A10-7850K
MOBO: MSI A78M-E35
SSD: SanDisk Plus 120GB
RAM: EVGA 8GB 2133MHz
PSU: EVGA 80+ 430W
Monitor: Acer G237HL bi

I installed Windows 7 Home Basic and did all Windows updates; this went fine. Reserved Windows 10 and downloaded/installed it when it was ready; this went fine. Once in Windows 10, tried to "reset this pc" by choosing "remove everything" and "just remove my files"; this went fine until doing a restart after reaching 100%.This issue being the "inaccessible_boot_device" error that many others have gotten which causes the PC to enter a restart loop.

Well, during this loop I made the (apparent) mistake of turning off my PC. Now, I can't even boot my PC at all. I get a black screen. I can't use the Windows 7 disc, can't use my MOBO disc, can't even boot into bios... nothing. All I see when I turn on my PC is literally a black screen with nothing on it. What can be done to fix this? I've read that putting Windows 10 on a USB by using the Microsoft media creation tool and booting from that to clean install works, but if I can't even boot from the Windows 7 disc, how can I boot from a USB? And I can't even enter BIOS to force a USB boot.

Okay, my PC will now boot into the "inaccessible_boot_device" error blue screen and does the restart loop. Not sure what I should do now. I'm afraid to power off my PC again.

Not sure why, but I was finally able to boot into BIOS. My only guess would be that, maybe when I tried(but failed) to remove my MOBO battery, just from me wiggling it caused it to reset? Idk.

Anyway, once in BIOS, I changed boot priority to DVD and was able to access reinstalling Windows 7.I am right now reinstalling Windows 7, on Disk 0 Partition 2(if that matters. wouldn't even allow me to install on partition 1 or 3).So, from the looks of things, everything is back to normal? I should be able to finish reinstalling Windows 7, do the updates and redownload/reinstall Windows 10 without issue? Though, this time I will NOT attempt to "reset this pc".

I'm back into Windows 10. So, I'm still not sure why I was finally able to boot into BIOS, but once I was able to, I changed DVD boot drive to top priority and was able to reinstall Windows 7 from the disc. I then did all Windows Updates. I then downloaded the Windows 10 ISO and mounted/installed it with Virtual Clone Drive.ng.

View 1 Replies

30-60 Second Black Screen With Cursor On Boot?

Aug 29, 2015

This has been happening ever since I upgraded to 10 about 2 weeks ago. I start the computer, 3 second ASUS logo, then windows 10 logo comes up and it loads for about 10-20 seconds, then I get a black screen with a cursor for 30-60 seconds, followed by another loading screen and finally the login screen. About the same boot time I had on 7 except for the long black screen. I can move the cursor around during the black screen, and it sometimes has the blue loading circle next to it. I've tried disabling fast startup and my video drivers are up to date.

Device manager doesn't show more than one display adapter, but it does show 4 monitors if I show hidden devices. My BenQ monitor in DVI-D and Generic PnP monitor, which is my TV plugged into the DVI-I port on my 770, and then a hidden copy of each of those. I usually have the TV off with display on my BenQ, but windows seems to think the BenQ is the second monitor, calling the TV the PC screen when I check windows key + P. I don't know if that's relevant or not, but it caused a problem during my win10 install (windows switched to the TV display mid-install.) I tried switching the display ports while booting up but I still had the black screen.

View 9 Replies

Very Long Boot And Black Screen

Jan 27, 2016

So recently I have been getting very long boot times, not sure how long as after 20 mins I get bored and walk off. After silly amount of time trying to boot it comes to a black screen with a mouse curser. Ctrl + alt + del does not work but I found pressing start + r and typing explorer.exe makes everything work. I installed some Intel drivers other day while rooting my tablet, maybe this is the issue?

View 1 Replies

Black Screen And WAIT During Boot-up

Aug 30, 2015

For two years I have had three hard drives installed. One small one went bad and at bootup I would get that information with "Press F1 to resume" which I would do and then windows would load. I upgraded to windows 10 from 7 three weeks ago, same message, and no problem, as it would still go right into windows. Last week I noticed windows update had a list of important updates. I believe I also had an nvideo GeForce driver update which I am sure I did first without problems.

When I did the windows updates and had to restart, I noticed I had a slightly different look but it still took me to the same press F1 to resume. However, the result was it went to a totally black screen with a tiny band of the new windows blue across the top and in the middle of the screen it said WAIT, not in windows type but in the same script when you first begin booting computer. It just remained there and there was no activity taking place, no blinking red light or solid red light like my computer always does. After at least 20 minutes of no activity I rebooted with the same result. Repeating the F1 kept giving the same result, and further reboots and then the F1 caused the computer to reboot maybe 2 out of 5 tries instead of directly going to the black screen. At one point I quickly saw something where I believe it askd to press tab or possibly delete and then gave an option to press F1 or F2. I am not sure which I pressed but it did go into windows and everything was fine for the rest of the day. I let my computer on but at some point overnight it had rebooted and back to the press F1 to resume which results in back to the black screen WAIT and this is where I am at again (I am using a different computer to send this). A

View 1 Replies

Black Screen No Cursor During Boot

Jan 9, 2016

Specs:
-Intel I7 4790K (NOT OC'D)
-250gb Intel ssd (boot and os)
-16gb Hyper x ram
-1tb seagate barracuda (games etc...)
-750w evga supernova psu
-HIS amd r9 290x (liquid cooled)
-Asus Z97K Mobo

Occasionally when I power on my computer it shows nothing but a black screen no cursor. Assuming its the gpu or display connection but hey could be something else. I switched over from HDMI to display port. I usually end up having to pushing the reset button on my case and it boots up perfectly fine. Just bugs my really badly when I have to boot to a black screen and having to push the reset button every time, the asus loading screen doesn't show either.

View 1 Replies

Performance :: Black Screen On Initial Boot

Jan 7, 2016

Acer laptop running 10 Home fully updated.

Turn the power on and the computer boots very quickly to a very dark black screen. I can just make out the desktop but not clearly enough to do anything. Power off then on again and it boots correctly but very slowly.

View 2 Replies

Black Screen After Boot Logo - No Cursor

Feb 23, 2016

All was good and well, until my Windows 7 on another drive gave me an NTOSKRNL.EXE error (fixed now). My Windows 10 booted fine at this point, but after entering my password, it was stuck on "logging in" for quite some time. I forced a reboot, and then I was stuck in the "Performing Automatic Repair" loop.

I eventually got out of this, only to be greeted by a "BAD_SYSTEM_CONFIG_INFO" BSOD. After replacing files from RegBack, I managed to get it to boot, but now I just see a black screen with no cursor. I've tried logging in and I had Chrome Remote Desktop but that didn't work either.

It's really not okay for Windows to just mess up randomly. The NTOSKRNL error from the other drive COULDN'T have caused this problem.

View 5 Replies

Drivers/Hardware :: Black Screen After Each Boot

Dec 31, 2015

I installed Windows 10 yesterday but had to return back to Win 7 because the driver problems crashed the whole system. Basically what happened was that I was stuck at black screen after every boot and got back only when going to sleep-mode through power button and back.

I tried to uninstall all graphic drivers but it doesn't really work when Windows is reinstalling them immediately. I though that I would only use my Nvidia and downloaded the latest drivers and after that disconnect from Internet but the driver installation just crashed the whole system. When I rebooted it crashed again so only thing I could do was to boot in safe mode and go back to Win 7.

View 1 Replies

Shows Black Screen After Restart Boot

Feb 9, 2016

so I recently did a clean install of Windows 10 on my laptop which I bought in 2011 with Windows 7 originally on it. The install worked perfectly fine and the OS works great except for one thing. When I select the restart option, the computer restarts and shows the Windows boot logo but then after that I just get a black screen. At that point, if I press the power button to put the computer in sleep mode and then press it again to take it out of sleep mode, the login screen appears. When I choose to shutdown and do a cold boot, everything's boots up fine. I do not have the computer connected to another video output source when restarting so it should know to project onto my laptop screen. All of my drivers (including graphics) are up to date as well as all Windows updates.

View 14 Replies

Black Screen With Cursor Shown After Boot

Aug 24, 2015

Windows is only showing a black screen after boot no login screen only my mouse, but the mouse isn't working only an external one works. The keyboard isn't working too.

View 2 Replies

Slow Boot / Black Screen Long Log In

Nov 26, 2015

After upgrading to W10, I've had nothing but issues since day one. Restarting is always a pain because after booting past the Windows 10 logo, I end up with a black screen for about 1-2 minutes, followed by the login prompt. After which, I'm istting at another black screen and then the desktop, very slowly, loads in. It'll show the taskbar, then the few icons, then the Windows theme plays.It just seems way to slow for this to be normal. I've tried everything I can think of up front.

View 5 Replies

Installation :: Inaccessible Boot Device - Black Screen

Sep 10, 2015

CPU/GPU: AMD A10-7850K
MOBO: MSI A78M-E35
SSD: SanDisk Plus 120GB
RAM: EVGA 8GB 2133MHz
PSU: EVGA 80+ 430W
Monitor: Acer G237HL bi

I installed Windows 7 Home Basic and did all Windows updates; this went fine. Reserved Windows 10 and downloaded/installed it when it was ready; this went fine. Once in Windows 10, tried to "reset this pc" by choosing "remove everything" and "just remove my files"; this went fine until doing a restart after reaching 100%. This issue being the "inaccessible_boot_device" error that many others have gotten which causes the PC to enter a restart loop.

Well, during this loop I made the (apparent) mistake of turning off my PC. Now, I can't even boot my PC at all. I get a black screen. I can't use the Windows 7 disc, can't use my MOBO disc, can't even boot into bios... nothing. All I see when I turn on my PC is literally a black screen with nothing on it.

What can be done to fix this? I've read that putting Windows 10 on a USB by using the Microsoft media creation tool and booting from that to clean install works, but if I can't even boot from the Windows 7 disc, how can I boot from a USB? And I can't even enter BIOS to force a USB boot.

My PC will now boot into the "inaccessible_boot_device" error blue screen and does the restart loop. Not sure what I should do now. I'm afraid to power off my PC again.

Not sure why, but I was finally able to boot into BIOS. My only guess would be that, maybe when I tried(but failed) to remove my MOBO battery, just from me wiggling it caused it to reset? Idk.

Anyway, once in BIOS, I changed boot priority to DVD and was able to access reinstalling Windows 7. I am right now reinstalling Windows 7, on Disk 0 Partition 2(if that matters. wouldn't even allow me to install on partition 1 or 3).

So, from the looks of things, everything is back to normal? I should be able to finish reinstalling Windows 7, do the updates and redownload/reinstall Windows 10 without issue? Though, this time I will NOT attempt to "reset this pc".

I'm back into Windows 10. So, I'm still not sure why I was finally able to boot into BIOS, but once I was able to, I changed DVD boot drive to top priority and was able to reinstall Windows 7 from the disc. I then did all Windows Updates. I then downloaded the Windows 10 ISO and mounted/installed it with Virtual Clone Drive. I am now back inside Windows 10, hoping nothing else goes wrong.

View 9 Replies

Boot To Flashing Black And White Screen Then Stopped

Sep 13, 2015

This is weird. I rebooted and the windows logo showed up but then it went to a flashing black and white screen. I rebooted a few times and the same thing.

Then I tried F8 while booting (thinking that would get me to safe mode) and it booted fine. BUT, it didn't look like it went to safe mode (not sure if it is obvious in Win10 since I haven't booted to safe mode yet). I rebooted a few more times and all OK.

View 1 Replies

PC Doesn't Boot - Black Screen And Flashing Cursor

Oct 18, 2015

PC froze and wouldn't ctrl-alt-del, so I turned it off from the power supply, and when I turned it back on, I get a black screen with flashing cursor just after the BIOS splash and just before the Windows symbol would normally appear. I've used a recovery usb - refresh, automatic repair, and system restore do not work, and I can't continue booting with the usb, can't get to safe mode.

I had a spare SSD, so installed 8.1 on it and used it to boot the PC, then attached the drive that wouldn't boot as a secondary drive. All of my files/programs appear to be there on the faulty drive, but for whatever reason the Windows 10 installed on it will not boot.

I'm sure the easiest option would be to wipe the trouble drive and reinstall Windows, but there are several work programs that would be a pain to go back and reinstall (would have to call in the vendor). Since the drive itself seems to be working, could I create a new partition and reinstall Windows to it, then uninstall the corrupted version?

View 12 Replies

Boot Up Stop With A Black Screen Showing ACER And Nothing Happens

Feb 26, 2016

Installed win 10 with no problems and it has been running successfully for a good while. Recently I have had some booting problems, not all the time but every so often the boot sits there with a black screen showing ACER and nothing happens. If you sit long enough it will boot with no other problems. I tried looking at the boot section and switched it to normal as it was on something else which I cannot remember.

View 5 Replies

How To Reset PC - It Asks For Boot Disk On Black Screen

Oct 10, 2015

How do I reset a PC with windows 10 installed to where it asks for a boot disk on a black screen or something like that? not where I reset it and windows is still installed, I need a reset it to where I can only go in the bios....

View 1 Replies

Update Fails During Second Boot It Stops At 93% And Goes To Black Screen For A While

Aug 4, 2015

I reserved my copy of windows 10. I have tried to update it plenty of time but every time i do it fails during the second boot, it stops at 93% and goes to a black screen for a while, than it says "restoring back to your previous version of windows" I dont know what to do. I tried mostly everything. I deleted all the files in the software distribution and went into command prompt and put in wuauclt.exe /updatenow that didnt work. I downloaded the windows tool directly from windows that didnt work.

View 7 Replies

Boot To White Screen With Black Squares Flashing

Oct 13, 2015

Recently I've started to encounter an error when booting my computer, occasionally it would boot to a weird flashing white and black screen. An example of this can be seen here: [URL]....

This occurs just before the login screen. While this happens, my cursor is still visible, though larger than normal. After a while, the flashing stops and the screen stays black, usually before this I would force restart my PC then it would boot fine.

General specs:
GPU: Asus gtx 980 strix
CPU: i5 4690k
Motherboard: Gigabyte Gaming 7
Ram: G.Skill Trident 2x8gb
PSU: Thermaltake Gold 650watt

View 1 Replies

Computer Booting To Black Screen - Other Times It Will Boot Normal

Feb 10, 2016

My laptop is running windows 10 32bit pro and ever since upgrading, the computer boots to a black screen but there are other times it will boot up correctly....

View 1 Replies

Machine Won't Boot - Screen Is Black And USB Connected Devices Just Turn Off

Aug 3, 2015

I recently built my computer, and it was working fine, I installed all of the drivers, but when I installed my graphics driver, my monitor just turned off. Now when I try and boot my machine, it goes to the windows 10 logo then nothing. My screen is black and my USB connected devices just turn off.

Specs:
mobo - asus m5a97 r2.0
GPU - Zotac GeForce 760
CPU - amd fx 8350
PSU - corsair 600w

View 1 Replies

(Black Screen) After Startup Boot - No Taskbar Nor The Icons Only Cursor

Aug 2, 2015

Today I upgraded my Win 7 PC to Win 10. Everything was fine 'till the installation finished and came up with my desktop. it loaded normally for a few moments then a black screen appeared with no taskbar nor the icons only cursor. I can access the Task manger and I tried terminating explorer.exe and restarting it but nothing changes.

View 1 Replies

Accounts :: How To Disable Auto Login Last User / Black Screen At Boot

Dec 24, 2015

Alright so for some reason ever since I've "upgraded" to Windows 10 from Windows 8.1 I've been having numerous issues with my computer taking a very long time to boot and I've noticed it is logging me in sometimes without asking me for my password at boot. I really want to stop the black screens as waiting 5-10 minutes every time I turn my computer on is annoying. Also I don't see why it would log me in without prompting for my password as why else would I have a logon password?

View 4 Replies

Everything Goes Black But Mouse Shows Up On Black Screen

Aug 27, 2015

I upgraded from windows ultimate to windows 10. my computer boots through everything and finally brings up my old windows 7 desktop screen and then everything goes black, but mouse shows up on black screen. Is this a driver problem with windows 10? However, before the black screen appears the new start button and screen appears as the windows 10 

View 1 Replies

Installation :: Black Screen Of Doom But Booted To Login Screen (no Cursor Just Blank)

Jan 18, 2016

I did a bit of research and this seems to have been an issue for a while, or has been in the past. Was upgrading to windows 10, I first had to restart my pc cause it was initially stuck on that preparing to install problem with the green bar being stuck around 25%.

It then got through that and began the installation process with the big circle and rebooting process. However around 91% when I last looked at it it was just black screen, this stayed this way for about 3-4 hours. I then decided to reboot the pc and it has now booted to the login screen. Is this a known bug or could there be a possible issue?

The problem seems a bit different as some people I saw have had to fall back on PC restore points etc. So not sure if it installed or what could be the problem.

Also side note, I upgraded my pc when windows 10 first publically released, but rolled back because I had about 5min shutdown times.

View 2 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved