Block Child Internet Connection
Sep 12, 2015I'm looking for a way to block internet connection of a child. So no more servers in minecraft, no more browsing the web, only the local stuff should be available.
View 4 RepliesI'm looking for a way to block internet connection of a child. So no more servers in minecraft, no more browsing the web, only the local stuff should be available.
View 4 RepliesBut I'm currently browsing the internet and typing to you.
In fact - I can do virtually everything (League; Steam; Skype; etc) except use any OS feature that requires logging in -
e.g. Mail, User Accounts, Shop, etc. Then it says something along the lines of "Cannot use this service without an internet connection - please connect and try again." When I run Network Diagnostics as the prompt recommends - it says I am connected and cannot find a problem.
It doesn't always happen - but it seems to be determined on start-up. If I restart it now it might be working next launch - but 75% of the time it will encounter the same issue. It's been happening for months now but I've sort of gotten used to using my phone to check my emails - but I've now encountered an issue with one of my hard drives being unable to be searched (tried indexing, etc) and the only step I've found that I haven't tried says it could be a corrupted user account - but I cannot update my user account without "connecting to the internet". -_-
The system is up to date. No driver updates available.
Working on desktop Lenova computer. I was updating the computer drivers when one of the drivers froze, I click on cancel. I tried the internet and it stated No Internet Connection. I went into Device manager and did the unthinkable. I deleted everything inside the Network Adapters, including the words Network Adapters. In other words, no Network Adapters are showing in Device Manager.
First, I would like to know how can I replace the words Network Adapters in the Device Manager menu, and download the two adapters that were there in the beginning. Lastly, how to get back the Internet to work again.
I am having a big problem with my internet connection going down since I upgraded to Windows 10. It went down 4 times in the last hour and having to reboot to get it back is not the solution. Device Manager shows I have a Broadcom Netlink (TM) Gigabit Ethernet adapter. I have tried using the software update link for the adapter and it says I have the latest software but I am not sure if that is correct and I don't have a clue what driver I would need to update the adapter. When my internet connection goes down my WIFI connection is fine and I can connect to the internet with my mobile devices. My current driver according to device manager is 15.6.1.2
View 17 RepliesSo today I've successfully Updates my PC running win7 to win10 TP and so far its working fine there's no issue except I can't connect to internet using my 3g Dongle or via any USB stick (providing internet).. I don't know if its Driver problem or something else .
View 1 RepliesSince I downloaded windows 10 I keep getting no internet connection before I log on. I called my internet provider and she had me checking a lot of things before she had me to type Device Manager in my search bar and look under networking to see if anything was off. Both my Ralink RT 3290 802.11 bgn Wifi Adapter and my Realtek PCle GBE Famili Controller had a yellow triangle with an exclamation mark in the middle beside them. She had me to right click on them to disable them, then go back and right click again to enable them. My internet connection came back but it keeps losing connection about once a week. I didn't have this problem before the download. This is a HP Desktop and I am connected wireless.
View 3 RepliesI was having trouble logging into Windows 10. It would not accept my password. I discovered that I was having an issue with a network cable and had lost contact with the internet. Once I replaced the faulty cable, things are working fine.However, I realized that I might have an internet service outage for any number of reasons, and then I would not be able to do any work locally. use my computer for lots of things that don't require internet connectivity. Music and video production, word processing, etc. how can I access my system if I have an internet connection issue?
View 1 RepliesSo I installed Windows 10 3 days ago via the USB provided by Microsoft through purchase on their online store. Since the install I have found that my WiFi connection, on startup, will work for maybe 2 minutes before dropping down to "Limited" and occasionally disconnecting entirely.
My PC is custom built and has worked perfectly fine for the almost 2 years I've had it. I've tried everything from resetting the router, having my ISP replace the router, uninstalling my Wireless Adapter from the Device Manager tool, installing the latest driver updates (Windows 8 for Rosewill RNX-N250PCe) and even running the ipconfig release/renew (which didn't release for some reason.)
I updated from windows 7 to windows 10 yesterday and ever since I haven't been able to connect to the internet. I always get a message that pops up that says XFast LAN Driver Failed and it says it needs to be re-installed. It took me ages just to get it to uninstall but now it won't let me reinstall the XFast LAN Driver from my ASUS MOBO driver disk. I've tried everything to get the internet to work properly but with no successful results.
View 1 RepliesI recently got the media creation tool for windows 10 and did make an ISO file so i can install windows 10 on my other laptop. But recently my internet is slow, a youtube video 5 min at 240p waiting 2-3 mins to be able to load without buffering...
So i was going to ask, is it possible, since i got the ISO file, to install windows 10 without internet connection ? I don't think there is anything additional to download since i got the iso file ready up, which is basically the windows ?
I upgraded my ageing Dell Inspiron 530 desktop PC this morning from Win7 Ultimate to Win10 Pro. The PC is connected to the router via ethernet cable.All seems fine in terms of the OS, but I have no internet access. I know the router's OK as my other devices are fine.When I run the troubleshooter it flags up "There may be a problem with the driver for the Local Area Adapter".Digging further, it seems the issue is "Windows couldn't automatically bind the IP protocol stack to the network adapter"
Looking at Services, I found the Wired AutoConfig and WLAN AutoConfig services weren't running were set to Manual. I changed these to Automatic and rebooted, but still no joy.The network adapter is an Intel 82652V-2 10/100 and Device Manager says it's working normally and the driver is up to date.
So, my wireless router went out on me yesterday during a thunderstorm, which I replaced today. My desktop will not connect to the wireless network at all. I have it connected right now, through my cellphone's hot spot. Also, I can connect my phone to the wireless network as well as a different desktop and get internet access, which suggests something wrong with this desktop, I would imagine.
Network Adapters:
ASUS PCE-N10 11n Wireless LAN PCI-E Card
Broadcom NetLink (TM) Gigabit Ethernet
I'm sure some additional information may be needed but I'm not sure what you would need, so I'll gladly provide what I can if needed.
I've been running Windows 10 on my PC for a few months now. I upgraded from Windows 7 and absolutely love it! However, I am having an issue. When I use my PC on a normal basis, Everything is good. Internet connection is perfectly stable, no problems. But ALWAYS if I restart my pc, and SOMETIMES when I put it to sleep, when my computer turns back on, my internet connection can't be detected. I have to unplug it for about 5-10 seconds and do a full reboot in order for my internet connection to be detected by my pc. None of my other devices have this issue. I have an xbox one, Smart tv, my phone, laptops, etc. connected and none of them have the same issue.
View 9 RepliesWhy do I constatnly lose my internet connection since upgrading to Windows 10? Did not have this problem with Windows 7 and Century Link. Once it is gone, cannot get it to reconnect. Keep getting a reset error message each time when running the diagnostics. If I can't resolve this soon, will be going back to Windows 7!!
View 3 RepliesI had windows 10, free download, on 25 of August, upgrade from windows 8, and the internet connection was fine till about 10 days ago. Trouble shouting result.."Ethernet does not have a valid IP configuration" . Contacted my provider Talktalk, was sent latest router, can connect with mobile wireless to router, can connect with laptop (Windows 7) hard wired, cannot connect with my desktop (hard wired) on which windows 10 is down loaded.
Have checked cable to desktop by using cable with laptop.
What do I need to do to get connected to the internet with my desktop?
Just upgraded to Windows 10, no internet connection. Had no problems before on 8.1.
No network adapters are recognized (Bluetooth, Ethernet, WLAN). Have Atheros Qualcomm AR9485WB.
Device manager says all is OK, but PC settings say no network adapters detected.
I tried to uninstall/install multiple versions of drivers but nothing works.
I just downloaded windows 10 and now I can't get an internet connection on any browser but MSN. Why? I want to use my default firefox or Google chrome but it says no internet connection. How do I fix this?
View 1 RepliesI recently downloaded the latest update for windows10 and since then have been unable to access the internet.
I have tried all the possible solutions available, but to no avail. using facilites of Windows10, but to no avail.
The internet group is shown on internet connections (shows “connected, secured)
I have contacted my internet provider and they advise that it is a “windows10 software problem”..
I have a Lenovo Yoga Tablet 2-1051F running Windows 10. I have a number of modern apps that refuse to open unless I am actively connected to the internet. Desktop (or legacy) apps open fine in airplane mode, but anything downloaded from the Windows Store will not. This even includes built-in apps such as calculator (?).
So far, I have tried:
1. running "sfc /scannow" in Command Prompt
2. running "WSReset.exe"
3. updating all drivers from lenovo
I have tried to recreate it on my desktop (also running Windows 10) by unplugging my ethernet cable and then opening various apps, and it functions as expected - they will open and perform everything normally, unless specifically needing the internet.
Don't get me wrong, I understand that certain apps require Internet Access (Hulu or Netflix come to mind). However, for even calculator to not open without internet seems wrong.
I just upgraded to Windows 10 on my Lenovo ThinkPad. I like the new features but it seems something is "blocking" my internet connection. After reboot, I can access the internet for a couple of minutes before the connection is lost again.
I am still connected to my wireless network. All ping requests fail. ipconfig/release -> ipconfig/renew does not restore the connection.
Clean W10pro installation from scratch. No upgrade. Quad Core intel @ 3.??ghz with 4GB on an intel board. Basic workhorse machine. Windows is up to date and nothing else has been installed to the machine. No changes to OS from defaults upon installation. Device Manager shows all attached devices are working properly. USB Wireless card connects to the access point just fine.
ICS is enabled on this adapter and shows as "shared". Ethernet adapter is auto-configured by ICS (IP and SUBNET). This adapter displays as "Unidentified Network" with or without cable connected. Under Status/Details: NO gateway. NO DNS servers.
Client Computer: same basic machine as above. Everything updated and functional.Ethernet adapter wired with standard ethernet cable to Host. (All this gear is modern and will not require hardline crossover)Ethernet adapter is set to obtain IP/DNS automatically.Under Status/Detail IP Address is 192.168.137.124 (DNS is working properly)Ping 192.168.137.1 successful without errors.
I disabled the firewalls. No improvement. Reset everything to defaults. Tried a "Bridged Connection" same "No Internet Access" results. In the end everything works except no internet access across the two adapters in the Host machine and there should be.
Today, when i opened my PC i found out that i have "No internet connection". The last time i used it was last night, and it worked like a charm. The problem is from the software itself I guess because other devices seem to be working fine connected to the internet. This also happened to me while using windows 8.1 but I got it fixed everytime with a simple "netsh" command. Now things aren't this simple, i tried multiple fixes and none of them worked. I tried to update the driver from the device manager but i can't find the microsoft and the producer driver, instead i find some outdated drives from like 2013.
View 9 RepliesIf I go to the network and sharing center on one of the computers on our home network it reports that it is not connected to a network, but this system can see other computers on the network and access the internet. The other computers cannot see this system, however. This system has an older X38 motherboard with an E8400 processor, but the initial in-place upgrade from Windows 7 had no problems at all.
I didn't notice the problem until I realized that about two weeks of backups across the network had failed. I have tried the repair tools in Windows 10 and have uninstalled and reinstalled the network adapter without success. I was hoping that the problem would be fixed by installing the recent big windows update, but windows update reports that it cannot connect even though I have internet access.
I upgraded to Win10 yesterday. upgrade could be a keyword for the future but since I upgraded everything has been perfect except my connection to the Internet. It's fine on startup but once I go on Edge, Chrome, steam or Skype it stops about 3 minutes in when using them. It doesn't come back unless I restart.
I'm using a Ethernet connect. All wireless devices are working fine, My LAN adapter is a Broadcom Netlink Gigabyte Ethernet. Turning router off and on again doesn't work. All drivers are up to date, apparently. No vpn.
I removed my McAfee to see if that changed anything but still no luck.
I don't know what to do now because this goes beyond my knowledge of windows 10 and computers.
My PC is over 5 years old, maybe that's a factor but it still surpassed all the requirements to run Windows 10
This brings me back to Upgrading and not full fresh install. I've too many family photos and other valuable projects. I dont have an external hard drive either, which I need soon as my current one is getting louder, but that's not the issue here. I just want to get on the Internet and enjoy my 120mb Internet speed!
Win10, diagnostic message is:"one or more protocols is missing".Running diagnostic as Administrator message is:" connection between access point, router or cable modem and Internet is broken".Have tried winsock reset, clean reboot neither solved the problem.What does ISO stand for. P
View 1 RepliesDoes Win 10 require an Internet connection for me to login with my Windows Live password or has it stored the hash on my laptop?
View 1 Replies