Bluetooth Transfer Does Not Work But Device Pairing Fine
Aug 15, 2015
I have been trying to test Bluetooth file transfer on my Lenovo IdeaPad running Windows 10. I am using an Android phone and an Android tablet to transfer a file. NOTE: Bluetooth transfer from the phone to the tablet works as expected, therefore any error in the Bluetooth stack on these devices can be ruled out.
On the Windows 10 laptop, the pairing works. I've documented the process here. The error can be seen in picture 3.
I can pair the LG Optimus G Pro with Windows 10. However, when I initiate transfer from the phone OR the PC, the transfer fails. On Android, the error is just "Transfer unsuccessful". I've posted 3 images about the error on Windows when transfer is initiated.
1) Device paired confirmation: [URL]
2) Initiating transfer: [URL]
3) Transfer failure: [URL] (Connected party did not properly respond after a period of time...)
I have a Broadcom Bluetooth USB 4.0 driver installed. How to solve this? Lenovo has not published a Win 10 specific driver for my device (Y580)
View 2 Replies
Similar Messages:
Jan 16, 2016
I am running Windows 10 Home version 1511 build 10586.63 on a Dell XPS L502X laptop. I have just bought a Bose SLIII bluetooth speaker. I can connect it up to the laptop no problem and it works well, however when I disconnect it I cannot reconnect them without removing the device and pairing it again. On my Android phone it is detected and automatically reconnects. Why I have to recreate the device each time I want to connect on the PC? If I do a Win+A then 'connect' and select the speaker device, it tries for a few seconds then I get a yellow message 'Couldn't connect'. When I remove the device and 'Pair' it again it connects immediately.
View 5 Replies
Apr 4, 2016
My Bluetooth service has stopped. The device, a speaker, is detected but pairing does not complete after endless scanning. Bluetooth is reported as requiring further installation. How do I do that? Driver update is greyed out.
View 4 Replies
Dec 17, 2015
I recently purchased a new Alienware Laptop with Windows 10 installed. I'm having issues where on start-up, programs such as File Explorer, Internet Explorer etc. are taking 5-10 mins to load, whilst Apps such as Windows Edge load straight away. If I also try to open say my C Drive on File Explorer once it loads, I just get the Blue Loading Disc for another 5-10 mins until that loads.
But if I restart my laptop, everything then seems to run fine after that (but obviously I don't want to have to keep doing that as a permanent solution). I'll run a Virus Scan and make sure there's nothing bad on there...
View 4 Replies
Dec 25, 2015
A few days ago, I upgraded my Windows 7 laptop to Windows 10 and took Cortana for a bit of a test drive. It wasn't great but it might be useful on some occasions.
Today, I bought a brand new laptop which installed Windows 10 when I powered it on. After the installation, I was checking things out a bit and wanted to verify that Cortana was working on the new laptop. Cortana promptly told me it was not available in this region!
This makes no sense to me. I was in Southern Ontario, Canada, both times (although in different cities within the area). I can't believe that Cortana would work in London Ontario but NOT in Kitchener Ontario, which is only an hour east of London.
how I can coax Cortana to work on the new laptop?
View 1 Replies
Aug 12, 2015
Platform: HP Stream 7 Bluetooth Device: LG HBS750 headphones
The device was paired, but would not connect. I attempted to remove the device, but the tablet has been trying to "REMOVE DEVICE" for 3 days now.
I can't stop or interrupt the process.
View 3 Replies
Mar 15, 2016
How do I rename a bluetooth device in Win10?
View 3 Replies
Sep 24, 2015
I am trying to remove two old Bluetooth devices in Windows 10 that keep showing up in Device Manager. I have tried to find them in Settings> Devices> Bluetooth and remove them but there isn't an option. When I uninstall them in Device Manager they keep coming back. How do I unpair and remove old Bluetooth Devices in Windows 10?
View 1 Replies
Aug 7, 2015
I have multiple bluetooth speakers. I don't see any way to select which speaker (or any device, for that matter) that I wish to use. On my Android phone, I can select any of the 10-20 devices that show when I enable bluetooth. How do I do that on Windows 10 on a PC/Laptop? It seems like Windows 10 just tries to connect to the first thing it sees when you turn on Bluetooth.
View 1 Replies
Dec 19, 2015
i have acer aspire 4750G with intel core i5. when i upgraded to windows 10, it didn't trace bluetooth device in device manager.
View 1 Replies
Aug 22, 2015
I am facing a problem with the Bluetooth connectivity in my laptop(OS:windows 10). If i connect to any Bluetooth device (phone/audio), wifi becomes limited and I'll not be able to access the internet. I'm facing this problem only after upgrading to windows 10.
View 1 Replies
Aug 11, 2015
Do I have to sync my Bluetooth after I upgrade to Windows 10? Or will all of my device just work fine without me doing anything?
View 1 Replies
Sep 10, 2015
I have tried for days to remove a Bluetooth Speaker that did not install proper, I remove it try to re-pair does not pair, then upon reboot it is installed again with error. No matter how many times its removed Windows keeps re installing the device on its own.
How do you completely remove a bluetooth device, all traces so you can start fresh?
I have searched the internet for 2 days and no one has the answer yet. Not even on the MS forums
View 3 Replies
Oct 23, 2015
I can get it to pair and says it is paired but it says it is disconnected in the playback and recording settings dialog box. Is it possible my devices are too old the Bluetooth dongle is BT2.0 and the headset is a MotorolaT225 hands free speakerphone for my cellphone which works fine. If they are then what headset does work with win10 out of the box?
View 6 Replies
Aug 23, 2015
Just realised that, since I upgraded from Win 7 64 Home Premium to Win 10, it has not detected the laptop's Bluetooth device. It doesn't even feature as a device in Device Manager ... not even one with a problem.
View 7 Replies
Jan 6, 2016
I am having trouble with the modern apps and connectivity. It feels like half my computer will connect to the internet, and the other half won't. Desktop apps like Chrome, Steam, Outlook, iTunes etc. all connect to the internet fine, but any of the Windows apps like Xbox, Store and (most frustratingly) Settings will not connect.
In my network and sharing centre in the control panel it says 'You are not connected to any networks' - but in the system tray, and in the settings app it shows me as connected to my home wi-fi. I am on a desktop, and using a USB wireless adapter. I don't think the adapter is the problem as I have tried it on another desktop in our house on Windows 10 and it worked fine. Curiously also, when I click 'Adapter settings' in the control panel, it shows the wifi connection.
I've tried updating the drivers for the wireless adapter, both through the Windows update and adapter website but to no avail (and as I mentioned, it seems the adapter works fine elsewhere). I've updated manually to the latest Windows 10 Pro build, i've done a DNS flush, I've tried disabling firewalls and anti-virus, I've tried disabling startup apps, I've done a clean install of Windows 10 and still am unable to fix the issue.
View 1 Replies
Dec 4, 2015
I'm not sure if this is the right place or if it should possible be network related... but for some reason, the "Bluetooth" tile is back in my Action Center, but I have zero Bluetooth devices on or installed.
It was there after the latest build 10586, then I think the first Cumulative Update came out and it went away... I doubt there was any causal link between them... but now after a restart of the computer, the tile is back... and I don't know why.
View 7 Replies
Jul 30, 2015
On Windows 8. 1, I had no issues with this speaker. It's a JBL Charge. After upgrading to 10 it worked fine until a reboot when it failed to connect (it pairs, but won't connect, and the speaker doesn't appear as an audio-out option in Sound settings).
The Bluetooth wizard in PC Settings says "Driver error" next to the speaker icon.
Poking around in device manager, I see this error:
"This device cannot start. (Code 10)
{Conflicting Address Range}
The specified address range conflicts with the address space."
The only references I find to this error online are for different (and quite old) version of windows, and seem unrelated to Bluetooth.
I can't even look at the "resources" tab because it appears to have vanished in Windows 10!
View 3 Replies
Feb 10, 2016
Recently, I acquired a Microsoft Bluetooth Mouse (3600). It works perfectly well, both on my Android tablet and on my old but efficient Netbook (still running valiantly under XP SP3). Never a problem in pairing the mouse on these two machines (and no problem either with the Logitech Bluetooth portable keyboard (K480), which is a real marvel in its own right).On the Android Lollipop tablet, Bluetooth is built in, while the built-in Bluetooth feature on the Netbook gave up some time ago, but was replaced by a dongle, which does its job without a hiccup.
So far, so good.On my desktop, running on Windows 10, which has no built-in Bluetooth capability (but the Bluetooth "service" coming with Windows), I use the same dongle as on the Netbook. With the Logitech keyboard mentioned above, no problem whatsoever: Bluetooth "sees" it immediately and pairs it in seconds - so there is certainly nothing wrong either with the dongle or with pairing a device, or the Bluetooth drivers and softwares, which came with the dongle, or with the Windows Bluetooth properties, which are correctly started and functioning.)
It's the Microsoft Mouse that presents an apparently intractable problem on that same desktop.
When activating the Mouse so that it can be detected when one wants to add a device, it is "seen" almost immediately. It is when wanting to pair the device to the machine that the problem arises. The pairing as such takes a far longer time than it normally does and when that operation concludes, I get error messages saying either that the mouse did not send the correct pairing code OR that it did not send a pairing reaction at all.
So, this is quite mysterious. Having a device that functions perfectly well with other machines, and not at all on my powerful desktop (while it can be detected, and while other devices function normally).I guess that the problem resides with that "code". However, Windows does not ask for it and Microsoft says that the mouse does not need one - which makes things even more strange, since it mentions a code when the pairing misfires.They are in Dutch (language of my Win OS) but the images speak for themselves. The error message on the 3rd screenshot says: "Communication with Bluetooth device has failed / No pairing reaction received". Sometimes (after bootup) the error message says failure but "Bluetooth device sends wrong code".
View 1 Replies
Mar 5, 2016
I've recently updated to Windows 10, but the Bluetooth didn't seem to work properly. It doesn't seem to be able to detect any devices. Also, i couldn't even find the option 'allow devices to connect to this computer' in bluetooth settings. i've tried to reinstall the latest version of drivers but it didn't work.
View 2 Replies
Jul 30, 2015
I have Windows 10 (upgraded from Win 7.1) installed on an iMac on a Bootcamp partition. When I was running Windows 7.1, all the function keys (to control brightness, volume, music playing) worked perfectly. Now under Windows 10 none of them work. And yes, I did go into the setup and try turning on and off the check box for whether or not the keys performed as Function keys with and without holding the FN key. If I go into Bluetooth devices, the keyboard is shown properly as an Apple Bluetooth Keyboard.
View 2 Replies
Aug 30, 2015
I own Lumia's phone, laptop and tablet - all with Windows 10 PC/ Mobile. A lot of apps, that I used before, now are not available - when I open some of them in the Store, I receive the message "This app will not work on your device" on both my laptop and tablet. When I own the tablet before 1-2 weeks, most of the apps, under "My Library" were not available already for download/ install. Today, I mess up my laptop, and did a fresh install of Windows 10, and apps, that I used before this fresh install, now are not available for download/ install, too.
What is the reason for that? Obviously, the problem is not hardware. Is it possible to be connected with the licenses or something?
View 7 Replies
Apr 26, 2015
So when I installed windows 10 my mouse stopped working but its been recognized in device manager and I don't know whats wrong. Mouse is ps/2 ....
View 1 Replies
Mar 10, 2015
I've noticed an interesting fact while i was working with few usb's . Windows 10 , at least mine cannot eject usb's no matter if you just plugged it in , safe eject doesn't work . There is a message coming up "this device is currently in use close all programs...."
View 9 Replies
Sep 12, 2015
i have my ASUS X555LD for almost a year now, so as far as date is concerned my laptop shouldn't be too old to suffer such illness. So it came with Win8.1 x64 of course and just recently, as soon as Windows 10 was released, i upgraded quickly.
but right after i upgraded to Windows 10, my laptop became ill and had this errors:
1. i got BSoD Most of the Time, one would say CRITICAL_PROCESS_DIED or UNEXPECTED_STORE_EXCEPTION. there are times my laptop would freeze in the BSoD, not even the 0% would move to 100%. so i had no other choice but to force shutdown it, and sometimes after turning my laptop on again i end up at my BIOS with no HDD nor BOOT ENTRY listed. as i experimented, i had to press slightly hard on the right side of my Laptop where my HDD is Located just for my Laptop to re-read my HDD once again, as soon as i got back to Windows 10, i ran an HDD Check and nothing was wrong, no bad sectors or anything. this is confusing me as to how it is happening. so i somehow got used to BSoD since my Laptop frequently experience it. sometimes just a simple movement that would shake my laptop would turn into BSoD again, i suspect something like my HDD or loose or the likes. i dont really know.
2. after the BSoD Case, a week or three i guess. i started to loose Audio Ability. it was just this morning, the Volume Icon has a "RED X" on its icon and states "No Audio Output Device is installed.". and after checking my Device Manager, to my surprise the Built-in Audio Device (Realtek) is not there. i don't know how or why it happened but i can't get it back.
even checking the sound tab on the control panel doesn't bring out Audio Devices.
i was wondering if ASUS or the PC Store where i bought my Laptop would fix it for me as per warranty is involved ?
View 4 Replies
Oct 30, 2015
in windows 10 when I trying to safely eject the USB it says that the USB device is already in use (which is not )and if I'm removing it forcely the pc freeze and I'm getting the bsod with the error: inaccessible boot device and then my pc turning off I tried to format but it still happing I had no choice to go back to win 8.1 and there everything good (also it happing with some USB devices but some are working to but still .
View 1 Replies
