Bluetooth Not Reconnect When Disconnected Without Removing Device And Pairing It Again
Jan 16, 2016
I am running Windows 10 Home version 1511 build 10586.63 on a Dell XPS L502X laptop. I have just bought a Bose SLIII bluetooth speaker. I can connect it up to the laptop no problem and it works well, however when I disconnect it I cannot reconnect them without removing the device and pairing it again. On my Android phone it is detected and automatically reconnects. Why I have to recreate the device each time I want to connect on the PC? If I do a Win+A then 'connect' and select the speaker device, it tries for a few seconds then I get a yellow message 'Couldn't connect'. When I remove the device and 'Pair' it again it connects immediately.
View 5 Replies
Similar Messages:
Aug 15, 2015
I have been trying to test Bluetooth file transfer on my Lenovo IdeaPad running Windows 10. I am using an Android phone and an Android tablet to transfer a file. NOTE: Bluetooth transfer from the phone to the tablet works as expected, therefore any error in the Bluetooth stack on these devices can be ruled out.
On the Windows 10 laptop, the pairing works. I've documented the process here. The error can be seen in picture 3.
I can pair the LG Optimus G Pro with Windows 10. However, when I initiate transfer from the phone OR the PC, the transfer fails. On Android, the error is just "Transfer unsuccessful". I've posted 3 images about the error on Windows when transfer is initiated.
1) Device paired confirmation: [URL]
2) Initiating transfer: [URL]
3) Transfer failure: [URL] (Connected party did not properly respond after a period of time...)
I have a Broadcom Bluetooth USB 4.0 driver installed. How to solve this? Lenovo has not published a Win 10 specific driver for my device (Y580)
View 2 Replies
Apr 4, 2016
My Bluetooth service has stopped. The device, a speaker, is detected but pairing does not complete after endless scanning. Bluetooth is reported as requiring further installation. How do I do that? Driver update is greyed out.
View 4 Replies
Aug 12, 2015
Platform: HP Stream 7 Bluetooth Device: LG HBS750 headphones
The device was paired, but would not connect. I attempted to remove the device, but the tablet has been trying to "REMOVE DEVICE" for 3 days now.
I can't stop or interrupt the process.
View 3 Replies
Oct 1, 2015
I was working on my Qosmio x505 on my router as I have been for the past 5 years with no problems. This time the laptop randomly just disconnected from my WiFi and wouldn't reconnect! When I try to connect to the router it acts as if I have never once connected to it (asking me for the pass). Once I put the password it does its usual thing and then gives me the message that it cannot connect.
I should mention that my laptop connects to my Samsungs hotspot just fine. Also, all my other devices (2 in total) connect fine to my WiFi. I tried to disconnect them and then connect my laptop and it didn't work. I reinstalled the WiFi driver but it didn't work. I tried troubleshooting but when it asks me to look for available networks and I press the option it completely bypasses the step! I tried to restart the laptop and router, didn't work either. I got so desperate that I backed everything up on my external hard disk and did a total windows 10 reset. That didn't work either!
I am sure I am putting in the password correctly. Also, when I left-click on the WiFi it doesn't give me the option to "forget" the network.
Windows 10 has been working for me very well since it rolled out, I doubt that it is a problem with windows 10 but it may be.
View 1 Replies
Oct 30, 2015
in windows 10 when I trying to safely eject the USB it says that the USB device is already in use (which is not )and if I'm removing it forcely the pc freeze and I'm getting the bsod with the error: inaccessible boot device and then my pc turning off I tried to format but it still happing I had no choice to go back to win 8.1 and there everything good (also it happing with some USB devices but some are working to but still .
View 1 Replies
Jan 10, 2016
I am getting numerous Device Disconnected sounds and occasionally Device Connected sounds.
I am trying to trace the source of these and started looking in the event logs.
There does not appear to be any events with Critical or Error tags showing.
Should the Device Disconnected event create a log entry?
If it does not can one be created to give me a clue as to what has been disconnected? Everything still appears to be working after a Device Disconnected sound is heard.
HW
M/b: ASUS P9X79LE
CPU: Intel i7-4930K 3.4GHz
RAM: 32GB
HDD: 2 x 2TB in RAID 1
HDD: 1 x 2TB
O/S
Windows 10 fresh install and updates to 10586.36
View 4 Replies
Jan 16, 2016
I have an odd issue where a Samsung SSD that is no longer in my system is still showing. The weird thing is if I bring up the properties, and then populate the fields of the drive (by pressing the populate button), it shows the capacity of the newer drive which is double the size. This drive is not a Samsung drive though. So I'm not sure what's going on here - see picture where it clearly states (at the top) that I'm looking at the properties of a 250GB Samsung drive, but the populated fields show it to be a 480GB drive.
View 17 Replies
Mar 15, 2016
How do I rename a bluetooth device in Win10?
View 3 Replies
Sep 24, 2015
I am trying to remove two old Bluetooth devices in Windows 10 that keep showing up in Device Manager. I have tried to find them in Settings> Devices> Bluetooth and remove them but there isn't an option. When I uninstall them in Device Manager they keep coming back. How do I unpair and remove old Bluetooth Devices in Windows 10?
View 1 Replies
Aug 7, 2015
I have multiple bluetooth speakers. I don't see any way to select which speaker (or any device, for that matter) that I wish to use. On my Android phone, I can select any of the 10-20 devices that show when I enable bluetooth. How do I do that on Windows 10 on a PC/Laptop? It seems like Windows 10 just tries to connect to the first thing it sees when you turn on Bluetooth.
View 1 Replies
Dec 19, 2015
i have acer aspire 4750G with intel core i5. when i upgraded to windows 10, it didn't trace bluetooth device in device manager.
View 1 Replies
Aug 22, 2015
I am facing a problem with the Bluetooth connectivity in my laptop(OS:windows 10). If i connect to any Bluetooth device (phone/audio), wifi becomes limited and I'll not be able to access the internet. I'm facing this problem only after upgrading to windows 10.
View 1 Replies
Aug 11, 2015
Do I have to sync my Bluetooth after I upgrade to Windows 10? Or will all of my device just work fine without me doing anything?
View 1 Replies
Sep 10, 2015
I have tried for days to remove a Bluetooth Speaker that did not install proper, I remove it try to re-pair does not pair, then upon reboot it is installed again with error. No matter how many times its removed Windows keeps re installing the device on its own.
How do you completely remove a bluetooth device, all traces so you can start fresh?
I have searched the internet for 2 days and no one has the answer yet. Not even on the MS forums
View 3 Replies
Oct 23, 2015
I can get it to pair and says it is paired but it says it is disconnected in the playback and recording settings dialog box. Is it possible my devices are too old the Bluetooth dongle is BT2.0 and the headset is a MotorolaT225 hands free speakerphone for my cellphone which works fine. If they are then what headset does work with win10 out of the box?
View 6 Replies
Aug 23, 2015
Just realised that, since I upgraded from Win 7 64 Home Premium to Win 10, it has not detected the laptop's Bluetooth device. It doesn't even feature as a device in Device Manager ... not even one with a problem.
View 7 Replies
Dec 4, 2015
I'm not sure if this is the right place or if it should possible be network related... but for some reason, the "Bluetooth" tile is back in my Action Center, but I have zero Bluetooth devices on or installed.
It was there after the latest build 10586, then I think the first Cumulative Update came out and it went away... I doubt there was any causal link between them... but now after a restart of the computer, the tile is back... and I don't know why.
View 7 Replies
Jul 30, 2015
On Windows 8. 1, I had no issues with this speaker. It's a JBL Charge. After upgrading to 10 it worked fine until a reboot when it failed to connect (it pairs, but won't connect, and the speaker doesn't appear as an audio-out option in Sound settings).
The Bluetooth wizard in PC Settings says "Driver error" next to the speaker icon.
Poking around in device manager, I see this error:
"This device cannot start. (Code 10)
{Conflicting Address Range}
The specified address range conflicts with the address space."
The only references I find to this error online are for different (and quite old) version of windows, and seem unrelated to Bluetooth.
I can't even look at the "resources" tab because it appears to have vanished in Windows 10!
View 3 Replies
Mar 5, 2016
my Mouse, Keyboard and my audio interface get disabled a few times a day. at seemingly random intervals.
mouse and keyboard are mostly no problem because they reconnect instantly, with one exception today which forced me to restart as win10 refused to detect them again.
but most annoying is when it disconnects my audio interface because it never manages to reconnect without me manually pulling the usb plug out and in. some programs and game crashs when i do that, or just wouldnt play any sound without restarting the program in question.
i installed win10 a few weeks ago, its a clean install not an update. this problem hasnt occured ever before last week or something. so i suspect some auto-updates could have messed with it. i have not tinkered with usb drivers or anything like that,
View 6 Replies
Jan 16, 2016
After upgrading to Windows 10 I'm getting internet problems. Most pages are very slow to load, I often get connection timeouts and lag in some games, despite the ping not being really that high. I thought it could be a browser issue so tried other ones but it didn't work. I've already updated all the drivers, have the latest BIOS and deactivated the P2P sharing of Windows Updates in local connection and applied all the updates that came up with Windows Updates. Oddly enough, Steam downloads and voice chat don't present any problem.
I've already tried the connection troubleshooter, to no avail, and also tried to renew the IP using instructions in a Tom's article:
1. Press Windows Key + X and select “Command Prompt (admin)”.
2. Type ipconfig /release and hit Enter.
3. Then type ipconfig /renew and hit Enter.
4. Type Exit and hit Enter."
But when I applied the commands I got the following message: "no operation can be performed on ethernet while it has its media disconnected" I'm connected using an Ethernet cable.
View 1 Replies
Jan 19, 2016
I am being bugged by a problem associated with USB ports apparently being intermittently disabled or disconnected.
The result is a cacophony of device disconnected sounds being played. It ultimately means the PC has to be shutdown. Occasionally a device connected sound will be heard as well.
I have heard that Win 10 is disabling or disconnecting USB ports to save power for tablets and such. Understandable for limited power availability but for PCs where power is always available this seems misguided.
I need to know if this is by design or can it be selected off via registry option.
View 3 Replies
Dec 5, 2015
I have a Lenovo IdeaPad S10-3, it was upgraded from Windows 7 Starter to Windows 10 early august. Working find everything until updating to version 1511 in november, after rebooting with the new version the WiFi appears disconnected, it only shows airplane mode and I can only connect to internet by cable. I have tried changing drivers, disconnecting and reconnecting wireless, even going back to former Windows 10 version, etc. but no way. WiFi appears with a red cross!. Why WiFi worked so fine in the former version and why it´s disconnected in the new version?.
View 14 Replies
Sep 9, 2015
I was attempting to figure out how to fix my internet connection, and there was an option which said disable, which i thought would temporarily disable my connection and allow me to simply reconnect. i hit that disable button, and all of the wifi disappeared from my laptop. I physically have turned the wifi on and off multiple times, but the internet connections box wont even show a wifi option. i connected with an ethernet to the internet, and it works fine. I don't know how to reenable the wifi on this new windows 10 system, since i just got it yesterday. i am using an older acer aspire 5742-6814 laptop.
View 7 Replies
Aug 4, 2015
Since the Windows 10 upgrade I keep getting a "Reconnect your Drive" alert in the action center. "Your file history drive has been disconnected for too long". What does this mean?
View 2 Replies
Nov 28, 2015
On Windows 8.1 pro, my computer would instantly connect to the wifi network from sleep. However, when I upgraded to windows 10 pro, the computer takes about 1 minute to reconnect to the network (which is very annoying). I have turned off the "allow the computer to turn of this device to save power" option for my network adapter, but this does not change anything. Does any body know how to fix this (or just prevent the computer from disconnecting from the network entirely during sleep as this is a desktop and I don't care about power management)
View 2 Replies
