I want to put a Seagate 4tb sshd in to my PC as a boot drive so I can install Windows 10 Pro when it's available. But, as I recall, Windows 7 max boot drive space without partition was 2tb. Does Windows 10 have the same limitation?
View 1 RepliesWhen trying to make an image backup I get"not enough space on drive" although it is a blank drive with 75 GB
View 9 RepliesMy C Drive Keeps losing Space and yesterday i had 14gb then it went to 799mb and it keeps going down every 5 mins URL>...
View 9 RepliesI can't find 'My Computer' to check out how much space I have on my C: disk. Where did it go? Also, how do I set my lists of Favorites on the left side as before in Win 7?
View 2 RepliesI have a 240gb SSD with Windows 10 installed. After selecting all the programs to determine the amount of space it should take I only saw 82gb yet I only have 44gb of free space left. At first it was only missing about 20gb of space which I thought would be a system restore point however now I'm actually running out of storage. What is taking up my hard drive space or how to determine it?
View 1 RepliesI have a HP Stream 11 laptop I bought from Walmart, it came with Windows 8.1 and I went through the charade of upgrading from 8.1 to 10 so it would validate they key and then I immediately did a clean install. Sadly with this laptop, it only has a 32 GB eMMC drive (non-upgrageable), when formatted it is brought down to 28 GB, after the clean install I was at 15 GB, I have installed very very few and rather lightweight applications that at most take up 1 GB. So left with 14 GB, what I have noticed since then... it seems as the updates rolls out, I'm starting to run out of space, I just did the "November 1511" update and I am now down to 5.75 GB free. Is there anything I can do to slim down Windows 10? or Should I just downgrade to a different OS?
View 3 RepliesI am getting a low disk space message from my system backup drive. It's 1 TB and it is full. There are not any files that I can delete. They are all system files.
Two questions:
1. Why is it so large?
2. Can I install a new larger drive and have it move the system files there?
I keep getting a message that my d drive has very little space. My computer is only 2 months old.
View 1 RepliesI'm going under Computer Management>Disk Management and have deleted a partition which gave me the unallocated 48gb, and I'm trying to add that unallocated space to the main drive (C), and it's not letting me, When I right the C drive there is only a shrink volume option, the extended volume is shaded gray.
I have windows 10, not 8. I'll attach a picture. Dropbox - issue.png
I have a Dell Venue 8 Pro with an upgraded Windows 10 installed. Always perform Windows Update but did not pay attention too closely. When the drive space was low and started looking a little bit closer, I found out that I have several Recovery Partitions. From Disk Management display, from left to right are the partitions:
500MB EFI | 40 MB OEM | 490 MB Recovery | C: OS 22.8 GB | 450 MB Recovery | 4.75 GB Recovery
The problem is I do not know which partition that Windows 10 actually created as its Recovery Partition. I do know that the 4.75 GB partition is my original Dell Venue 8 Pro Recovery Partition. Which one can I remove to allow the expansion of my C drive? What gives?
I just bought my surface book. I am trying to partition my C Hard drive. I thought that I have to shrink it first, then create a partition. However, the shrink space allowed is only around 3 GB. My disk size is 512 GB.
I defragmented (or now called optimized) the C drive and retried it, but no use. I would like to create a new drive call it D, and leave C for windows only.
Something is causing my C-drive to completely run out of space. I did some investigation and found a folder under AppDataLocalPackages. The folder was called windows_ie_ac_001 and it is about 36Gbs. I deleted it. The strange thing is that after I restart my computer, you can literally watch my hard drive fill up back to the 36Gbs. The folder I deleted is back too and if you go to its properties, it's increasing in size so I know it's the culprit.
Doing some more investigation I found out this problem folder is for a stupid programmed called AVG Web Tuneup. I tried to delete the program in Uninstall/Install and it won't work.
Attached Files : Example.jpg 106.29KB
I recently upgraded my Windows 7 laptop to Win10. However, before I did the upgrade, I did a clean factory install of Win7, kept installing Automatic Updates until I get the option to Upgrade to Win10.
I have a 500gb HDD, that is partitioned in to two, C: for OS and D: for Local Disk (storage), currently the C: drive is 58.5gb, of which I have 13.5gb left, this is with having only Windows 10 installed AND Printer Driver and Software.
Is there any benefit of creating the Windows 10 media disk, reformatting with this Win10 disk, and getting rid of any of the rubbish that might of been installed in the process of doing a clean install of Win7.
OR re partitioning the Drive, so I can steal some of the storage from D: and give it to C: . I have 397GB of unused space on D:
I also just noticed, it states I have a Partition called RECOVERY, however, I don't seem to have this on My Computer view.
I have a Lenovo laptop with a non-upgradeable SSD. I have installed the update from Win 7-64 to Win 10. All of that went smoothly. But now I have a 25gb directory named "Old Windows" on my C drive. Can I safely delete that directory to reclaim that precious SSD space?
View 1 RepliesSo my C: Drive has been acting up lately, with barely enough space to stay alive. I tried to take some space off the D: Drive, which has 240 GB of unused space, and add it to the C: Drive using Disk Management. But when I shrink the D: Drive and Right Click on C: Drive the Extend Volume button is Greyed Out! I think this is happening because the Free Space is not adjacent to the C: Drive.
View 6 RepliesI have a 120 gig solid state hard drive, that I have my OS installed on (Windows 10)
I was going to install windows 7 on a second partition on that hard drive, so I shrank the current partition and it gave me unallocated space.
I had a few people tell me it wasn't possible to install windows 7 on the same hard drive as windows 10... for some reason or another.
So I decided to expand the partition back to its original size (the whole hard drive).
Before I shrunk the partition.. I had 60 gigs left, I shrunk it by 20 to install windows 7 on.
Well after some people told me it wouldn't work. I decide to re-expand the partition to take back up the whole drive.
Problem is, when I did that.. I loss that 20 gigs, it says that 20 gigs is 'used' space now. I tried scanning the hard drive for errors and defragging (won't let me defrag that drive.. I assume cause its either a solid state drive or the windows drive)
I don't know how to get that lost 20 gigs back.
In my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect
Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition
Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
When I try to boot from a recovery flash drive, it fails with: EFIMicrosoftBootBCD error status: 0xc000000f and message: The Boot Configuration Data for your PC is missing or contains errors.
The recovery flash drive was created on a Lenovo ideapad originally with Windows 8, now upgraded to Windows 10, latest upgrades applied. Checked the box for copying system files. Target drive was a 16GB DataTraveler flash drive formatted as FAT32. Creation ran to completion with no errors. When booting normally, Windows 10 runs fine with no issues. I tried re-creating the recovery drive with the same results.
I created a repair disk and tried to use bootrec to fix the issue, but I suspect it did nothing or fixed the c: drive. I ran boot rec while in the root directory on the flash drive.
I have a legacy 64 bit dual core desktop (ASUS mobo). I have several Sata hard drives in it with the 4th partition of my 1 Terabyte drive containing my Windows 10 Professional boot OS. After converting another similar legacy machine to a NAS device I took the old Windows 10 32 bit OS drive from it and tried booting the ASUS machine with it. Needless to say, the OS didn't like it and reverted to Windows 10 Pro Insider Preview edition (build 11082).
When I tried to restore the boot drive to the original one for this machine the master boot was missing.
I had just formatted another partition on the same drive that had contained a Windows7 installation that had failed. This partition may have contained the master boot record. So I booted to a command prompt from a USB drive and successfully ran the following commands:
bootrec /RebuildBcdbootrec /fixMbr bootrec /fixboot bootsect /nt60 SYSbootsect /nt60 all
After that the BIOS just says "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system" This disk and OS are on the original machine it used to run on. As I understand it, Windows 10 tries to record it's key to somewhere in the BIOS. But the BIOS on these old machines don't provide such a facility. I don't understand what Windows 10 OS does with the key in this instance. If it was recorded in the BIOS then I'd presume that the other Windows 10 drive I attempted to use would have found it and used it. Or perhaps not, since it didn't like the new environment.
what I'm looking for is a way to get my original Windows 10 to boot again on the same machine it had always work on before, from the 4th partition of the 1 terabyte drive I'm using.
I wasn't sure which forum to put this into. I created a backup image on a usb hard drive. I wanted to be able to restore it using a usb recovery thumb drive. I used the create usb recovery tool and created the recovery flash drive. When I try to boot from the flash drive I get an error saying that the boot configuration data is missing or contains errors. I can boot up the laptop using the current windows install so it isn't referring to the hard drive. I have tried several usb drives and get the same message on each. Here is a screenshot of the message.
View 9 RepliesMy laptop doesn't boot because OS is on E: drive instead of C: drive
When I try to boot it up (it somehow boots up as windows 8.1 instead of my OS windows 10), it gives a BSoD and shows the error code 0xc000021a. I created a bootable USB drive with windows 10 pro on it, but it shows my OS as windows 8.1 instead of 10, and it doesn't allow me to restore or do a startup repair, because they both fail.
Booting up:
Repair shows windows 8.1 instead of 10:
Windows 10 is definitely the best desktop OS ever. I found one improved feature really annoying when you work with a small screen. The advanced aero-snap function to automatically re-size four windows into 2x2 arrangement.
However, since windows 7, I get used to use 2x1 snap on my laptop. So, is there any way to disable the 2x2 snap and turn it back to 2x1 snap no matter you snap to a corner or an edge of the desktop?
I own a Gigabyte P34G V2, and it's a laptop, but it's been designed with a special USB 3.0 port to use for charging. This port should charge at 1 amp, compared to a usual USB 3.0 port's 0.5, But it has some odd behavior on my Winodws 10 OS for me.
So, the Gigabyte Smart Manager I have has charging enabled, for sleep and hibernation, everything on, and I got a USB power checker to check voltage and amperage.
Every other port on the laptop does 0.44 Amps, but this port refuses to work properly.
When plugging it in, it will spike up to 0.88, and then stop outputting power altogether, before turning back on at 0.44 Amps.
I post this in the Windows 10 section because I believe the issue has to deal with drivers, and not with the hardware or anything, I have BIOS settings set for it to charge as well.
Not sure where to put this but I have just received an email from ms saying I have reached the device limit for my ms account after installing win 10. On the list is a vm which I have removed and a 64 bit version of win 8.1 which is on another account. What is this all about says I am limited in the store.
View 5 RepliesI did a search and only found hits referring to a metered and/or WiFi connection, neither of which applies to me.
I have only a (nominal) 2Mbps connection -- which is the fastest available in my neighborhood. This has been a problem with Windows updates all along, but since I've upgraded to Win10, the trouble is exacerbated to the point that the internet is sometimes unusable when I'm getting an update from MS. This is especially problematic in that my spouse works online for a living, so MS eating up the bandwidth affects her job directly.
So, my question is in two parts:
1. Is there any setting whereby I can limit the download speed of the Windows updates? I don't wish to defer or stop any, just make them very low priority for bandwidth.
2. Is there any setting/switch I can toggle that will show (like the old flag icon in Win7) that there are Windows Updates downloading, so that I can tell whether any internet sluggishness is because of Windows or just the connection itself (which, living here the Third World, is far from constant). I'm hoping to document these fluctuations for an ongoing attempt to get better service from our ISP.
I realize this isn't really the place to lodge a complaint with Microsoft, but it sure would be nice if they (and other international software companies) would consider those of us who do not live in Redmond, Chattanooga, or other places with light-speed internet connections when they set things up.
This happens to me with all my games...Also when i try to force vsync through Nvidia inspector it locks at 70 fps.
View 1 Replies