Boot Orders And Setting Up Raid
Sep 6, 2015
I have 2 ssd drives and one mechanical for back up.
Currently I have windows 10 installed on one SSD and nothing on the second. I have cloned the SSD with OS onto the mechanical and I am trying to boot to it and format both SSD drives so I can pool them into a single storage drive with the new windows 10 utility.
I have changed my boot order in the bios to boot from the mechanical drive but windows will not let me delete/format the SSD that I originally installed the OS onto.
View 1 Replies
Similar Messages:
Mar 20, 2016
I bought two new SSDs to be used in a RAID 0 configuration with a Dell 9020 under Windows 10.
Before the drives I arrived I configured two old HDDs in RAID 0 and installed Windows 10 as a clean install. This worked perfectly.
Once the new SSDs arrived I configured these in RAID 0 and started a clean install. Windows correctly identified the disk with the correct capacity and the install completed without issue.
When the computer restarts I got a "A disk read error occurred" error.
If I boot from the installation media to a command prompt I can see that the Windows files have been correctly installed to the C drive of the RAID 0 array.
I also tried loading the RAID drive during Windows install but this made no difference, and if it was the driver causing the issue it would not have worked with my old HDDs.
If I open diskpart I see that the drive is not marked as boot, which it is when I check these details on the old HDDs in RAID0.
View 1 Replies
Sep 22, 2015
My current hard drive is failing and, since I have two brand new identical hard drives lying around, I decided to do a RAID 0 set-up. I went into the BIOS and set SATA 1-4 as RAID and 5-6 as IDE. I left the Raid ROM as Legacy. I then went into the RAID set-up and turned both hdds into a RAID 0. I then inserted my usb stick with Windows 10 and started the installation process. The installer saw the raid without any issues, installed windows, and then rebooted. Unfortunately, it was at this time the error in the title appeared. No matter what I did, it would not stop producing the error. Even attempting to boot to my previous hdd (which was not included in the raid set), would produce the same error. The only way to stop it was to turn off the raid and completely remove all of the raid set partitions. This allowed me to boot into my old drive at least.
Specs:
Operating System Windows 10 Pro 64-bit
CPU AMD FX-812034 °C Zambezi 32nm Technology
RAM 32.0GB Dual-Channel DDR3 @ 2400MHz (11-11-11-28)
Motherboard ASUSTeK COMPUTER INC. CROSSHAIR V FORMULA-Z (Socket 942)28 °C
Graphics G276HL (1920x1080@60Hz) 2047MB NVIDIA GeForce GTX 750 Ti (EVGA)28 °C
Storage
465GB Seagate ST9500325AS (SATA)26 °C
1397GB Western Digital WDC WD15EARS-00Z5B1 (SATA)33 °C
465GB Seagate ST9500325AS (SATA)24 °C
298GB Seagate ST3320620AS (SATA)32 °C
232GB Maxtor 6L250S0 (SATA)35 °C
7GB Memorex TRAVELDRIVE 005B USB Device (USB)
Optical Drives HL-DT-ST BD-RE WH12LS30
View 1 Replies
Oct 8, 2015
I am converting an existing Windows 10 Pro laptop to RAID 0 - and I keep getting to the final boot where it says INACCESSIBLE_BOOT_DEVICE. What am I doing wrong? The laptop has two 1 TB Samsung 850 SSDs that are identical. Laptop is a HP Zbook 17.
Here are my steps:
1. Made a good System Image of C: drive on separate external SSD drive connected by USB. D: drive didn't have anything on it to be saved.
2. Used Win 10 Pro DVD to delete all partitions/format drives.
3. Went into BIOS and changed from AHCI to RAID, and also to turn on ability to do Control-I to get to Intel RST ROM.
4. Rebooted, did Control-I, created a RAID 0 of the two disks.
5. Rebooted, installed Windows 10 fresh. Verified it would reboot on its own.
6. Rebooted, went into Repair on Windows 10 DVD. Selected external SSD image to do image restore from.
7. Rebooted - verified on Control-I that the RAID 0 array is listed as "bootable"
8. Rebooted - get INACCESSIBLE_BOOT_DEVICE.
The place it dies - I see the little Windows 10 blue window, and the spinning circle at the bottom - then I get the blue screen with the message.
View 9 Replies
Dec 2, 2015
So at first, I was trying to resolve an issue with my BD-ROM drive described here: XPS 8700 - BD-ROM (HL-DT-ST DVDRW/BDROM CH20N) Not Recognized Windows 10 - Disk Drives (HDD, CD/DVD, Blu-ray) Forum - Disk Drives - Dell Community
However, when attempting to try different things, I am now in a position where I can no longer boot to Windows 10. More specifically, when I turn on my computer, I get an error saying no bootable drives found and it just lists my SATA 1, 2, 3, etc. drives with an option to restart or go to BIOS setup. In other words, I don't even see Windows anymore existing.
My basic computer specs:
Dell XPS 8700 SE
Intel Core i7-4700
Windows 10 with 1511 update
2TB hdd with 32GB mSATA SSD cache drive
16GB RAM
BD-ROM
I need to get Windows working again, and hopefully, get back my data. Here's what I did to cause the problems:
1) I went to Dell UEFI BIOS setup, and changed the SATA mode from "RAID" to "AHCI". Saved and exited BIOS.
2) After rebooting, Windows failed to load, had a consistent blue screen with the sad smiley face with error "IO1_INITIALIZATION_FAILED", automatic repair also failed.
3) I tried reverting back to "RAID" in SATA mode in BIOS, but it failed to change anything. Windows still wouldn't boot
4) I then entered into the special BIOS menu showing devices which listed my mSATA cache drive and hard drive and RAID settings. Since it showed that the cache drive was "Disabled", I thought I could fix my issues by re-creating the RAID array.
5) I tried to delete the current RAID setup shown in that BIOS menu, then chose the option to recreate the RAID0 array by selecting the option to create a "Striped Disk Array".
6) Once I did the above, Windows itself disappeared, and trying to undo the RAID0 option did not fix anything
So now I am no longer seeing Windows, not sure if my data on the hard drive still exists, and my cache drive (obviously) is not working.
doing a clean reinstall and losing all my previous data in Windows?
View 9 Replies
Jan 25, 2016
Okay. I have been doing a lot of cloning and migrating an OS before but I haven't done cloning or migrating an OS from dual drives in RAID 0 mode.
It's not my PC. Is it a different approach or is it just like working on a single drive? Can Macrium handle this?
Btw, I know clean install is the best way to go, but I was told by the PC owner that she can't afford to install all her programs back due to time issues, etc.
View 9 Replies
Dec 19, 2015
I have an ssd and I want to get another to configure it in raid zero for faster pc but I have already installed windows 10 on one, is there a way I can configure it in raid zero without having to reinstall windows?
View 5 Replies
Jul 31, 2015
I currently have Windows 10 installed on a Raid 0 of Two Samsung 840 Evo's. Because of a change in the way I am using the PC I need to disable the raid and leave them as separate drives.
The reason I am concerned is that windows 10 is bound to your Hardware, not you. So for me to reinstall windows after disabling raid would I need a new copy or would just installing windows 10 again work?
Alternately if I was to re-install windows 8.1 on my machine after disabling raid. Would I then be able to do the upgrade again and get windows 10 that way?
View 1 Replies
Nov 13, 2015
So I know very little about raid configurations and how to set them up. I have just finished building my pc and everything is working great, however what about the raid configuration my 500gb ssd and 1 tb hdd have been set up in.
I am therefore wondering a) how to find how my storage has been set up, b) which raid configuration to go for and c) how to set it up.
I was thinking of having the ssd and hdd already installed acting as two different drives. i have put windows 10 and all the programmes on to the ssd and would like the hdd to be seen as if it were a usb stick (I think that is what it is at the moment as under this pc the ssd and hdd show as different drives). Then have those two drives mirrored to a single 2 tb hdd.
I have heard about raid 5 but from what i have read this spreads the data across multiple drives and the drives used have to be the same size and so wont work how I would like them to.
View 1 Replies
Jan 30, 2016
I have Windows 10 Pro installed on an SSD in AHCI mode.
I would like to add a RAID 1 array to this system for storage but I understand some registry tweaks must be made before I can change my BIOS from AHCI to RAID mode or I'll end up hosing Windows.
I've read that the edits for older Windows at [URL] do not apply to Windows 10. know the registry edits that work for Windows 10?
View 3 Replies
Feb 10, 2016
I've rescued an old small server(working with Red Hat enterprise -- but I can't have the OS as it's licensed by the office) from our office --was being chucked out but looks quite good to me.
4 SATA bays populated with 4X 3TB HDD's (the HDD's were mine BTW !!!). I'm thinking of using this as a NAS server - 16 GB RAM and decent Intel CPU (i3 equivalent -- good enough for media server).
The only problem is that it's MBR BIOS and I have two RAID 0 arrays consisting of 2 X 2 3TB HDD's.
Installing Windows though -- No HDD's seen !!! yet there's 12 TB of them in the system.
The RAID is onboard --not a separate RAID controller.
Should I remove the HDD's and send the server on it's original journey to a one way trip to the City's TIP.
(On board VGA good enough also for running a GUI - if I can ever install an OS on it -- preferably W10).
View 5 Replies
Oct 19, 2015
I have a PC with Asus Z97-Pro mb. OS (W10) is on SSD. Two SATA HDD's (each 1 TB) contain dissimilar data. Can I add a third SATA drive (1TB) and create a RAID-1 configuration with only one of the two existing drives? The mb manual says that when SATA ports are set to RAID mode, all SATA ports run at RAID mode together. Does this mean that I cannot do what I am asking?
View 1 Replies
Aug 6, 2015
A small server setup by a linux programmer who is no longer available and support is non-existant failed after an automatic update left the machine unreachable from the LAN. Samba crashed and I now have 2 RAID arrays formatted NTFS that have thousands of files. I am going to install Windows 10 Pro on it. Will I be able to recover the data on the two RAID arrays?
View 1 Replies
Aug 20, 2015
When I built my PC I only got a 250gb ssd, figuring that it would be enough for the time being. I have been having issues with what to keep and what to get rid of on there.Is there a way to convert my (C drive to raid 0 keeping everything installed or will I have to format and reinstall everything. Also, could I do the same with my 1Tb secondary drive so I won't have to re-download everything as I have a slow internet connection.
View 1 Replies
Nov 5, 2015
I am finding the correct driver for my SATA RAID controller which is operating two mirrored 2TB hard drives. The computer still recognizes the controller being installed at the BIOS level. But currently Windows doesn't see the controller card or hard drives.
Information on the card is; Sil 3124 PCI/PCI-X to 4 port SATA300
System information is: AMD 64x2 Dual Core 5800+ 3.00GHZ with 6GB RAM operating Windows 10 Pro.
View 2 Replies
Jul 30, 2015
I have a PC with Asus P9X79 Deluxe motherboard. It has Intel chipset and Intel BIOS RAID (RSTe) and 6 SATA ports connected to it. The chipset IDE controller lists in Linux as:
Intel Corporation C600/X79 series chipset SATA RAID Controller (rev 06),
and the PCI ID is:
0104: 8086:2826 (rev 06).
My RAID configuration is 2xOCZ-VERTEX4 256GB SSD's in RAID0, as boot drive (C: drive), and 2 (quite old) WDC WD2500KS 250GB disks in RAID0 for extra storage (games, movies etc) (J: drive).
So yesterday I decided to upgrade my Windows 7 Ultimate to Windows 10 Pro. All seemingly went well during the upgrade process, and the system booted fine, and most stuff seemed to work as it should. But after a while when I accessed files on the J: drive I started experiencing random (temporary) freezes.
Then after a while it got more serious and the whole system froze, I had to hit the reset button.
So I rebooted and looked in the event log, I get see tons of errors there saying that the disk has a bad sector.
Then I try using the J-drive again, by viewing some videos there, and it works fine, but after a while there are some freezes and then I see in the event log, that the drive was reset. After this it works again for a while but then another of those resets comes, and freezes everything for a short while (like 30 seconds).
But when I try to copy some large files off the J-drive, another reset comes, and then the event log starts showing a lot of the error messages from before, with "the disk has an bad sector". (I will post screenshots of these errors after I reboot back into Windows).
After this I can't access the J-drive at all, and Windows gives me error messages when I try to.
So, I figure that I might have just got unlucky and the old WDC drive actually developed read errors, although it's strange that it happens exactly when I install Windows 10 (these drives are something like 7 years old).
Well I can't copy the contents off the disk from Windows since it keeps failing as described above, so I boot into Ubuntu Linux from a USB stick, so I can use ntfsclone to image the J-drive to another disk. I start it running expecting that I'll start seeing read errors, but to my surprise there are NONE. It also copies all files off the J-drive without any problems from inside Linux!
So it was after all not the old drive that had failed, but instead Windows 10/Intel had failed me in a big way.
I trawled the web for updated Intel chipset drivers and installed those from the Asus site, but it made no difference at all. I couldn't find any other Intel drivers and when I searched for the RST drivers on Intel's own site, I could only find ones for Windows XP upto Windows 8.1, but none for Windows 10.
For now I'm left with a PC that I can't use, because I can't go back to Windows 7 and Windows 10 is not working with my RAID arrays. I got some spare 2TB disks, and I'm right now copying all the data from the old J-drive (the RAID1 about 500GB) over to this, hopefully I can then work in Win 10, but I am VERY concerned because the same RAID and drivers are used for my master boot drive with the two OCZ SSD's.
View 9 Replies
Feb 10, 2016
Trying to restore an image on to a RAID 0 SSD from stand alone version.
After loading the RAID driver Macrium SEES all the HDD's and can select images etc.
However when TARGET destination is chosen No HDD's are seen. !!!
Need fixing this --otherwise this backup software becomes USELESS !!!!.
Macrium --latest version.
View 5 Replies
Jul 31, 2015
I am in the process of attempting to install Windows 10 on the system listed in my profile. I have downloaded Windows 10 as an ISO and transferred this to an NTFS formatted memory stick. The installation process works ok but I am having problems getting the SSD setup for UEFI mode and secure boot. what settings I need to apply under CSM to get the SSD running in UEFI mode? And if there are any other settings needed?
View 2 Replies
Feb 10, 2016
So at my work and home I have been setting up Bitlocker. Today at work I was setting up Bitlocker on a PC and we could not get a password for a option to unlock the device. The only option we get is to either use a USB or a pin. As per the compliance officer we have to require an encryption passphrase upon boot and I am not big on pins. How do I get my passphrase ability back?
View 6 Replies
Sep 11, 2015
So I thought I'd give Cortana a try since I can turn it off again if I don't want it, however I get to the point where it makes me login, I enter my email address and password and then it takes me to the next step where it tells me something like you need to enter your current password just one more time.
I enter the same password one last time and it tells me it's wrong.
I go through it all over again and reset my password and try again, go though the first login and get to the second stage where it asks me to enter my password one "last" time, and I do and it tells me it's wrong again.
Try a third time, this time leaving the password blank on the 2nd step and still fails.
Edit: I know the password is correct as I've used it to login to live this morning, so not sure why it's not accepting it in the 2nd stage of the Cortana setup.
View 3 Replies
Aug 13, 2015
I use a VPN and Cortana and the OS thinks I'm somewhere else. Is there anyplace to put a zip code to force the OS to think you're in a specific location?
View 2 Replies
Oct 10, 2015
I've been using Windows 10 set up exactly as I wanted it since my original installation. Today I wanted to set up Cortana. It was suggested that I use a PIN instead of a password. I thought this was just for Cortana so I agreed. Now my whole system has been changed. I have to log in with my Microsoft account which I never had to do and don't want to do. How can I get back to my original name with no long-in at startup.
View 9 Replies
Aug 23, 2015
What is the deal with windows and contrast? For many years windows has been lowering the contrast to the point that now with windows ten it is often impossible to see. The box I'm typing this in is basically invisible. The scroll bars are gone and I have to find them by waving my mouse around until I cross it. The selected link in my side bar is reduced to a then slightly grey line that simply cannot be located. This is just silly.
Is there any setting that can get some contrast back? And I don't mean the text contrast. I can read text fine. It is the controls, gadgets and highlighting that needs to be fixed.
View 9 Replies
Feb 6, 2016
I got a new laptop (Pavilion 17) and first time using windows 10.
Problem 1 - I originally had to turn on scrolling for the click pad which was yesterday. Now today scrolling was turned off and I had to turn it back on again. Stopped using computer last night while it was copying files over (via network). Computer was left open and running.
Problem 2 - This morning the network was completely disconnected and I had to go in and 'join the network' again. I did have to 2 this 3 times yesterday while I was using the computer as well.
Problem 3 - This morning all my windows had been closed? Explorer windows that were being used to copy and firefox also.
View 1 Replies
Aug 12, 2015
I don't particularly want to have both a PIN and a password - it seems 100% pointless.
Is there any way to enable Windows Hello's biometric login options without setting a PIN?
View 1 Replies
Sep 5, 2015
As my desktop PC (like a lot of I suspect other PC's) doesn't have built in GPS, it means that whenever Windows 10 tries to automatically determine where am I (for example, when I'm looking at the built in map client, or Cortana is finding something nearby) it actually thinks I'm around 70 miles away.
Is there any way to manually set my actual location more accurately in Windows 10?
View 1 Replies
