BootBCD - Blue Screen Saying Error Code 0xc000000f
Aug 23, 2015I used the media creation tool to upgrade from windows 7 to 10 and this happened upon reboot of the tool .
blue screen saying error code 0xc000000f
File: BootBCD
Similar Messages:
Computer Blue Screened With Error 0xc000000f - HDD Failure
May 7, 2015I recently built a computer on an $850 budget. I got it all put together, and I installed Windows 10 from a flash drive. It worked for a small while, then it blue screened with the error 0xc000000f (This was due to a HDD failure of some sort, so I replaced it and stopped receiving the error).
Now when I am booting up to install Windows 10 (because I swapped HDDs) it will act normally and proceed with the installation. The problem comes after it restarts to set everything up, and it wants me to install Windows like I hadn't tried to install it and as if it hadn't restarted.
Here are the specs for my computer (if it has anything to do with it):
Motherboard- Gigabyte GA-Z97X-GAMING 7 ATX LGA1150
Processor- Intel Core i7-4790K
RAM- Crucial Ballistix Sport 16GB
Installation :: Blank Blue Screen - Update Failed With Error Details Code 8007002C
Sep 28, 2015I have been trying to download windows 10 on my laptop (windows 7). It does the download and looks like it is all downloading fine and it starts rebooting and then it goes to a blank blue screen and doesn't go off the screen. I have to turn my laptop off just to do something on it, it then restores my old version of windows and doesn't download windows 10.
I then check the update and it says "failed" with the error details "code 8007002C"
Installation :: Can't Boot - Error 0xc000000f
Oct 18, 2015Yesterday I removed dual booting Linux and after that my Windows 10 won't boot up. I have tried everything. The cmd commands: bootrec /FixMbr; bootrec /FixBoot; bootrec /RebuildBcd; Bcdboot commands and everything. Then I tried Refreshing PC what says: Drive where Windows is installed is locked. Please unlock it.....
Startup repair just scans for a short period and then says: Couldn't fix the problem. I can't Access normal Recovery options, so I'm using a recovery flash drive. I have tried several Live CDs but none of them won't fix the problem. I can access the UEFI Bios, but idk what to change there. I don't want to fresh install Windows, unless it's the only option, because it contains important data.
Having Blue Screen With Error
Jul 31, 2015just recently i installed windows 10 (clean install) on my built desktop. At first it was fine installing programs etc. Then not sure what i installed last or what happened during an installation but now when i try to install a program like Nivida Graphics Card Driver the blue screen error comes up. It never fails, even if i try and install skype it also causes the problem. I originally had the Nvidia G experience installed but i read online that this might be causing the problem so i uninstalled successfully but it is still happening.
View 1 RepliesInstallation :: Upgrading From Windows 7 - After Copying Files System Restarts / Error 0xc000000f
Aug 4, 2015I have tried to upgrade from win7 to win10 after copying the files and the system restarts, I will get the error 0xc000000f. I have both win7 and win10 disks and the automatic repair would not work.
Apparently this has to to with some bios settings, I have tried to follow the guide but I do not have all the options to described in the guide below.
[Solved] Error Code 0xc000000f Windows 8: A Required device isn’t connected or can’t be accessed
Specs:
Processor (CPU)Intel Core i7 Quad Core Mobile Processor i7-3630QM (2.40GHz) 6MB
Memory (RAM)8GB SAMSUNG 1600MHz SODIMM DDR3 MEMORY (2 x 4GB)
Graphics CardNVIDIA GeForce GTX 660M - 2.0GB DDR5 Video RAM - DirectX 11
2nd Graphics CardNONE
Memory - Hard Disk120GB KINGSTON V300 SSD, SATA 6 Gb (450MB/R, 450MB/W)
2nd Hard Disk1TB WD SCORPIO BLUE WD10JPVT, SATA 3 Gb/s, 8MB CACHE (5400 rpm)
Blank Blue Screen With No Error Messages
Aug 14, 2015It has happened twice since I installed windows 10 in the last two weeks.
I have the default blue desktop in 10 and I also have a rather old ATI Radeoon HD 4600 graphics card, though the driver date in device manager is January 2015.
Whilst browsing facebook on two occasions the screen has just gone a totally blank blue colour, no error messages or anything like that. I have to hard restart, as task manager won't come up, and windows 10 starts fine again, doesn't go thorugh CHKDSK or anything.
WIndows 7 works perfectly on my other partition so not a hardware or monitor problem just specific to windows 10.
Error Loop - Blue Screen Of Death
Aug 12, 2015Valid windows 7, sit back and relax message on the install, then blue screen of death and error loop, No support from Microsoft. Off to local computer store to see if they can get this fixed or off of my PC..... way to go Bill - no wonder the upgrade was free.
View 1 RepliesIRQL Not Less Or Equal - Blue Screen Error
Aug 18, 2015Getting this Blue screen Error. Here is some more details.
==================================================
Dump File : 081915-32437-01.dmp
Crash Time : 8/19/2015 10:44:12 AM
Bug Check String : IRQL_NOT_LESS_OR_EQUAL
Bug Check Code : 0x0000000a
Parameter 1 : 00000000`00000002
[Code] ....
Installation :: Upgrade Failed At 83% With Blue Error Screen
Aug 7, 2015I downloaded the MediaCreationToolx64.exe to upgrade to windows 10 but it failed at 83%. An blue error screen appeared with . I wasn't even able to read the error because my laptop shut down.
So I tried upgrading to windows 10 again but now it requires me to give a product key. I tried to put my windows 7 product key but it does not work.
Installation :: Blue Screen With Internal Power Error
Aug 24, 2015I m using dell inspiron 14, and upgraded to windows 10. Now my laptop keeps restarting giving me internal power error. I reached the troubleshooting part where I clicked on startup settings.when I click restart there..it restarts with blue screen without giving me safe mode option.
View 2 RepliesWhea Uncorrectable Error - Getting Blue Screen 3 Times A Day
Sep 23, 2015So every day i get this blue screen error 3 times a day, my pc started doing this 2 weeks ago, never did it on windows 8.1 and was fine on 10 for a while. Googled it and says its a cpu voltage error, but i have reset my UEFI to defaults, updated UEFI, updated drivers , and nothing works. My CPU is the intel i7 4790k and the motherboard is an Asrock Z97X killer. The interesting thing is my laptop does the same thing and so does my friends all in one pc, so is this a windows 10 issue? and is there a fix?
View 1 RepliesThread Stuck In Device Error - Blue Screen
Jan 9, 2016So I have read a couple of articles of people with the same issue and they're saying that i should uninstall the graphics card drivers, and reinstall them, and i have done that and I'm still getting the same problem. I can't play any games and it's rough.
CPU: AMD FX-6300 Six-Core 3.5 GHz Processor
GPU: SAPPHIRE DUAL-X Radeon R9 280
Ram: (2x4) Corsair Vengeance 1600
PSU: CX600 — 80 PLUS® Bronze Certified Power Supply
MB: GIGABYTE 970A-D3P
BSOD :: Constant Blue Screen Error And Restarting Loop
Feb 10, 2016I recently purchased an intel NUC6i5SYH kit PC and fitted it with the following RAM and HDD.
Samsung 500GB 850 EVO M.2 SSD: Amazon.co.uk: Computers Accessories
HyperX Impact 16 GB 2133 MHz DDR4 SODIMM Memory Kit (2 x 8 GB): Amazon.co.uk: Computers Accessories
I installed a copy of windows 8 that I owned and then upgraded it to windows 10. It was working fine for a couple of weeks, and suddenly it had and error and is stuck rebooting itself with a blue screen error.
The error appears to be different every time but the ones I have seen repeated are "WHEA_UNCORRECTABLE_ERROR" and "MACHINE_CHECK_EXCEPTION".
I can get into the BIOS and that's about it. I can't find a way to boot into safe mode and when I try and install a fresh copy of windows 10 via USB created from microsoft i still get a blue screen error after a couple of seconds.
Blue Screen Error Bad System Config Info On Startup
Mar 14, 2016I built my very first PC in the weekend. Everything was working fine, but after a restart, I had an error message saying something along the lines of "Windows couldn't start". I then had several options where I ended up choosing something like "Start Windows from a version that worked" which erased like half of my programs and many of my drivers. I then proceeded to reset the computer entirely and restarted.
Now, the computer is working again (as it were before) and I've installed everything again, including all the drivers (I hope). However, when I restart the computer, I get a blue screen that says: "Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we'll start for you. If you'd like to know more, you can search online later for this error: BAD_SYSTEM_CONFIG_INFO. It then restarts and works perfectly. This only happens every approx. third restart, the other times, it boots just fine.
I bought Windows 10 Home on a USB which I used to install on my new SSD. All the drivers should be up to date. What to do?
Components
Intel Core i7-6700K 4.0GHz Quad-Core Processor ||| Cooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler ||| MSI Z170A KRAIT GAMING ATX LGA1151 ||| Motherboard Kingston HyperX Fury Black 16GB (2 x 8GB) DDR4-2133 Memory ||| Samsung 850 EVO-Series 500GB 2.5" Solid State Drive ||| Seagate Barracuda 2TB 3.5" 7200RPM Internal Hard Drive ||| MSI GeForce GTX 980 4GB ||| NZXT S340 (Black/Blue) ATX Mid Tower Case ||| Cooler Master 750W 80+ Bronze Certified Semi-Modular ATX Power Supply
PC Unable To Startup After Attempting To Reset - Blue Screen Error
Aug 10, 2015My pc is unable to start-up after attempting to reset it(fresh reset). It is in a restart loop and when I try to turn it on the Windows 10 logo appears but then a blue screen appears saying "Your PC ran into a problem and needs to restart. We're just collecting some error info, and then we will restart for you." This then lets the PC restart and this restart process happens again. I have tried pressing F8 while it boots up to try to get it into safe mode but had no luck.
View 1 RepliesBlue Screen (system Service Exception) Error Message
Dec 22, 2015I just built a new computer and have been randomly getting this error message from time to time...and sometimes have trouble even getting the computer back to the Desktop without hitting the blue screen again....if I'm on the desktop and it happens it usually says (atikmdag.sys) at the end...sounds like a graphics card issue, however I have the latest drivers for the card (non beta)...when attempting a restart to fix and it hits blue screen right after that bit at the end is not there...here are comp. specs
Motherboard - MSI 760GMA-P34 (FX)
CPU - AMD 8320E
GPU - ASUS R7 360
RAM - Avexir Blitz 1.1 - 16gb 1866mhz (dual channel)
HDD - WD 1tb blue
Power - Corsair CX600M
OS - Windows 10 Home
I have some possible theories: The RAM may be causing issues...Avexir does not use the more common Samsung chips I don't think and has (Intel optimized) all over the packaging...I will try swapping G-Skill RAM from another comp soon to test this
Also I didn't realize at the time but the motherboard has no drivers from MSI past windows 7...could that be causing issues?...
And of course there's that ending on some of the blue screens indicating a graphics car issue...could the latest drivers for Windows 10 on a GPU be creating issues on a board with no Windows 10 drivers?
Blue Screen Error When Connect Acer Aspire V5 572 To External Media
Aug 17, 2015Whenever I connect my acer aspire v5 572 running win 10 connects to external media like printer or mobile .. It freezes and show me page fault in non paged area ..
View 1 RepliesBSOD :: Computer Crashes In Blue Screen (Page Fault In Nonpaged Area Error)
Aug 12, 2015This is happening sice i installed windows 10.On windows 8.1 this was not happening.
Every time when i try to update a game,and install something my laptop restarts and it saying "Page fault in nonpaged area"
I know how to fix it.Only instaling and updating games from Steam works.
Multiple Reboot Attempts Never Got Past 4 Blue Square Screen After Kernel Security Error
Mar 23, 2016A couple of weeks ago when booting up my PC, I came to I assume the Windows 10 version of the blue screen of death. It said something to the effect of a kernel security check error, it said it was repairing the PC and would reboot.
However, it wouldn't reboot. The farthest it would ever go is the 4 blue square windows screen and then eventually the screen would go black. For a while, the blue light on my monitor would stay solid but the "analog" and "digital" icons on the screen would alternate between analog and digital. Eventually it would just go black and the monitor screen would blink and the HDD light would stay off.
Multiple reboot attempts never got past that screen, and eventually the screen will just go black and the monitor light just blinks.
I went to my office computer that also runs Windows 10 and made a repair disk. I got home today, got into the BIOS and changed the boot priority to the DVD. I was able to get it to boot up to the repair disc (after a couple of attempts) and got into the repair utility. I tried the Start Up (or boot) repair, and it said it couldn't fix it. I tried the system restore and it said I had no restore points. So I thought (stupidly), maybe just getting into this repair disc area it would go ahead and boot on up. So I clicked "Exit and continue to Windows 10". Well that got be right back to where I was, a black screen.
So then I decided I would just go back in and use the utility to "reset", keep certain files and do a clean Windows 10 reinstall. Now I can't even get back into it. When I try to boot, IF I can even get any data to show on the screen and the monitor to "wake up" I can't get back into the repair disc. I can get as far as "Press any key to boot from CD or DVD" and then it will go to the 4 blue square windows screen that I was at previously, then eventually the screen will flash and then just stay black. By a little googling, sounds like maybe it could be a video card issue?
Installation :: Black Screen After Installation (Error Code 8007002C-4000D)
Jul 30, 2015I've tried downloading and installing Windows 10 via the System Update for the past 24 hours (I've tried it 5 separate times). Every time it gets to 84% overall, and 36% configuring settings, then goes to a black screen with nothing on it (including no cursor) and almost no HDD activity. This has happened all five times.
Windows 7 Ultimate 64bit SP1
Intel Core i7-2600 CPU
16gb Ram
AMD Radeon R9 380 Series
Single monitor
All USB Drivers Have Code 39 Error
Nov 4, 2015After I uninstalled catalyst control centre (because I was having problems with it). When I restarted my mouse and keyboard weren't working. So I tried a ps2 kb and mouse and this worked. I went to device manager a looked at the USB devices, all of them had a yellow warning sign next to the devices. I checked each one and they all had error 39 (missing or corrupted drivers). I tried updating and uninstalling the devices with no avail. How can I fix this?
View 1 RepliesUpdates :: Error Code 0x800705b4
Feb 17, 2015I am trying to install the following update:
When I get the following error and errorcode:
Restarting is not working.
Windows Error Code Oxc000021a
Sep 1, 2015I upgraded to W10 a few weeks ago from W7. All went well.
Then 2 days ago i got the windows error code oxc000021a, and the computer wouldn't start. Couldn't get into safe mode, and repair didn't work either. Really annoying. I've had to reinstall windows 7. I can still see my windows 10 old install saved under windows.old.
I don't have any option yet to re-upgrade to W10, despite putting all the updates on W7 again. What can I do to get W10 again and recover my data from windows.old?
Error / Movefile Failed Code 183
Nov 5, 2015Whenever I try to install a new version of some software I get the following message: "movefile failed code 183".
View 6 RepliesError Code C1900101 When Upgrading
Aug 8, 2015Every time i try to upgrade to windows 10 i get an error:
Upgrade to Windows 10 Home
Installation date: 8/8/2015 4:42 AM
Installation status: Failed
Error details: Code C1900101
Any fix that actually works so i don't have to try 100 things. The only thing to note is i have two drives, one is an ssd which is where my current windows is installed and its path is E, not C, just wondering if that may be the problem.