I would like to do a clean install I have downloaded windows10 .iso free version file from creation tool to DVD is the file bootable. If not how do I make a bootable DVD or USB from the downloaded.
i just finished my first build and it's working perfectly.I have installed Windows on my 250 GB SSD and i'm now looking at the file manager.In the BIOS my 2 TB HDD could get detected, but it does not appear now.
I would like the OneDrive icon to be hidden/removed from File Explorer on my 64 bit Windows 10 Home device. I find the same steps all over the that don't seem to work for me involving setting two flags in the registry as follows:
Set the System.IsPinnedToNameSpaceTree DWORD value to 0 for both of the following:
I've set them both on and off, restarting inbetween, several times but it doesn't seem to affect OneDrive in the File Manager. The other option presented is ripping OneDrive out completely but that doesn't seem to work for me as well. Those instructions involve killing the OneDrive process and then removing it using the following commands:
64-bit edition of Windows 10: %SystemRoot%System32OneDriveSetup.exe /uninstall 32-bit edition of Windows 10: %SystemRoot%SysWOW64OneDriveSetup.exe /uninstall
I've though I'm running 64-bit Windows 10 I don't even have OneDriveSetup.exe in my System32 folder. I do have it in my SysWoW64 folder but when I run it with the /uninstall switch nothing seems to happen and the OneDrive icon remains in File Explorer.
I am downloading an ISO File from the official Microsoft Website (Windows 10 Insider Builds). My PC is infected which could result in the ISO File being infected and injected by a infection.. How to scan this ISO File before I install the Build onto my PC. After I do that, I will use a Bootable Anti-Virus, Bootable Anti-Virus to me.
I have a folder structure (see below) that is created after upgrade from W7 to W10. In my previous question a day ago it was confirmed that it could be used for creating W10 installation media. So I don't want to repeat how it was created. It was created automatically and it is 3GB in size.
My question: I burned files and folders to DVD using native W10 burn files to disk method. The disk is not bootable. The structure on the root of the disk is exact as in Windows folder on the pic. Did I miss the option for making it bootable? Or it should be bootable just by burning the content to DVD?
Since windows 10 has been launched and it has already been downloaded on my PC and installed. I wanted to know how to create a boot-able DVD so that I can also install it later, you know like doing a completely fresh installation and having the windows staying activated. Cuz windows was upgraded to 10 from 8.1 and Microsoft didn't gave me any key, so if I install it again on the same device will it remain activated?
Had tried to update the BIOS on my son's Alienware Aurora R4 so that we could install an upgraded graphics card (980 Ti).
Used the Dell Support site - and was upgrading from Bios 7 to Bios 9 - would eventually go up to current version 11 before swapping GPU.
Followed all the steps on the Dell site - but afterwards - it acts like my hard drive has died (doubting this - have fairly new Samsung 512GB SSD as the only hard drive).
Computer boots into Bios now - but says "inaccessible boot device". My son had done the update from Windows 8 that came on the machine to Windows 10 - but apparently did not create a boot disk or USB drive.
Can I create a "generic" bootable USB on another computer - WITHOUT REINSTALLING WINDOWS? I do not want to lose info/settings on his machine if at all possible.
Waiting on Alienware Tech support to respond - machine is about 2.5 years old and out of warranty
I have downloaded all ISO images of Windows 10 through Media Creation Tool. Each ISO image is consisted on both versions (x86 and x64) of respective windows.
Now, I want to convert all Windows 10 ISO images in a single bootable USB in a way which will give me the list of selection of installation windows 10 at the time of installation.
I've added a Linux live disk (ISO) to a USB drive using Rufus & changed the UEFI so all the USB boot options are the preferred ones. My laptop still does not see the USB during boot (also the light on the USB drive stays off as if it's receiving no power).
My gamer Laptop (ASUS G55VW ROG) is now upgrated from Windows 7 SP1. It went smooth and without errors.Before fiddle around too much I want to make a bootable USB-key with Windows 10 installaion to make a clean install possible if I mess windows up so it can't boot.But how do I make this bootable USB-key? I know I can "reset" the PC from "settings", but that only works if it can boot .I had the understanding, that it would be possible to make a DVD or an USB-pen to make a clean install? And what about cd-key when cleaninstalling from that bootdevice?
I have been using windows 7 ultimate for more than 2 years and now I want to upgrade to windows 10. My friend recommended a clean install, gave me an iso for windows 10 enterprise, tell me to use a program called rufus and referred me to this tutorial
My question is: Is it better do a clean install or simply upgrade from the built-in windows update tool? Then, if I should do a clean install, is rufus the suitable tool for making bootable usb?
I've searched on Google how to make a USB bootable to install windows files. I'm planning to buy Win10 CD, but my PC DVD drive is dead (making an annoying noise during startup). so is there anyway to make USB bootable to install windows files?
I bought Windows 10 for my new build. I didn't put a DVD drive in the computer because I knew I could boot from USB. How do I create a bootable USB drive with the Windows 10 CD? (I have a new USB with 16 gbs of storage)
It won't let me mark as active in the disk manager. And I need to make it bootable so I can dual boot. Do I need special permissions to make the other partition bootable?
I bought the Windows 10 USB drive version for my new PC, my old one has the technical preview which has expired and I can't upgrade to 10 since my base windows 7 was Ultimate N, is it possible to use my windows 10 USB drive (full version) to install Ubuntu on an old pc? If so, will there be any risk, void warranty, just break it entirely?
When I am trying to bootcamp my mac using a windows 10 iso file, it gets about the third of the way and says "your bootable usb drive could not be created. an error occurred while copying the windows installation files". I have tried to unmount it in disk utility but there is nothing to unmount ...
I am runnning the latest version of yosemite and my mac is mid 2012
I have been having problems starting up windows. I have a SSD in my laptop and I'm not sure if it is failing, or if my windows files are corrupt.
1.Windows will sometimes start, allow me to log in, but then freeze as soon as I get to the desktop. 2.Windows will start up to the login window and then freeze. 3.Computer will start, have a blank screen, but still have mouse that i can move. 4.Computer will start with error "hard disk (3f0) Laptop does all four of these in varying order, but most often it would do 2.
I have not been able to get it started into safe mode yet. (freezes up before getting there).I do have a bootable flash drive with Ubuntu on it, but when it boot, it doesn't recognize the hard drive.
Tried looking this up online, but couldn't find any specific information. I'm running on Windows 10 Home, and I have a Windows 10 ISO I want to put in a flash drive so it's bootable. How do I do this?
My computer has been upgraded to Windows 10 and activated. I have a non-bootable DVD Windows 10 ISO. Is it possible to do a clean install with that non-bootable DVD disk? Any alternative to do a clean install?
Heard imgburn can create a bootable DVD ISO, but after downloading the software then found it is infected, and decided not to install it.
Does Macrium or other common/good backup/clone package can take an existing good bootable SD Card and clone it to a fresh one? do they need to be exact matches [brand/speed/size] or near-proxy?
After the recent update I had some problems and decided to reset my system. For some reason I could not boot from my bootable backup drive or a bootable USB drive. I have software which came with the external drive and it previously backed up and created the bootable USB drive. So, I reset the pc and of course it wiped out all my programs like the backup drive software, Ccleaner, Malwarebytes, etc. etc.. I reloaded the software for my backup drive and then was able to restore from the image which I had previously created. Of course I had to get the update again but it went well yhis time. All the programs were there and my system is operating flawlessly once again. The image backup was a lifesaver.
I highly recommend the external usb backup drive for recovery purposes. It was extremely easy to create the bootable image backup (for recovery) and keeps a running backup as well. There are numerous ways to create a backup but this was just too easy and, as it turned out, worked well for me.