When I am trying to bootcamp my mac using a windows 10 iso file, it gets about the third of the way and says "your bootable usb drive could not be created. an error occurred while copying the windows installation files". I have tried to unmount it in disk utility but there is nothing to unmount ...
I am runnning the latest version of yosemite and my mac is mid 2012
I was just creating a folder on my C drive (SSD) when I noticed that the attribute is set to read-only. I've tried clearing the attribute many ways using the link below but to no avail. Right-clicking on the folder does not show the option to Take Ownership. how to correct it?
Remove read-only attribute from folder - Windows 8.1
Got caught by this sneaky Windows 10 downloading to my laptop. This download created a new partition on my harddrive as a protected system drive. I have tried to take ownership of this new partition with no success, I have tried to restore to a previous date with no success - it fails. How I can remove this partition from my hdd?
View 1 RepliesJust shrank my boot system "E" drive slightly, now how do I move the new volume into the "C" drive?
View 9 RepliesOK so I received the update on my clean install of win 10 on my split Intel NVME SSD. Just went to do a Macrium image backup and discovered that the update has created an extra partition on my drive. Although small it is stealing space from my second partition that I save the backups to. I also have some extra files on C: as shown.
To regain space what files can I delete? Can I restore the extra partition without damaging windows. Do I need to include the extra small partition with C: for a Macrium backup to be able to restore if anything gets screwed? I was expecting the update to just update the C:/ drive.
I bought Windows 10 for my new build. I didn't put a DVD drive in the computer because I knew I could boot from USB. How do I create a bootable USB drive with the Windows 10 CD? (I have a new USB with 16 gbs of storage)
View 1 RepliesI bought the Windows 10 USB drive version for my new PC, my old one has the technical preview which has expired and I can't upgrade to 10 since my base windows 7 was Ultimate N, is it possible to use my windows 10 USB drive (full version) to install Ubuntu on an old pc? If so, will there be any risk, void warranty, just break it entirely?
View 1 RepliesI clean installed Win 10 RTM version on my laptop a few weeks ago. I have a basic GPT setup.
Installation went fine, however the installer created a 'Recovery' drive (D with a size of 600 MB (262 MB free) & a 'Local Disk' drive (E with a size of 451 MB (128 MB free).
I am stumped as to why it assigned letters to them. If you see the attachment of a snapshot of Partition Wizard, you will be able to see the setup.
My question, besides why the assigned letters is the where the status is listed as 'None'. Is it safe to delete these?? I am assuming that the only partitions i need to keep are the 'ESP', which is 'Active & Boot' - so it is needed to be able to boot into Windows. How about the one listed as 'Other' - the capacity is 128 MB & all 128 MB are used - do i save this one as well?
I really wanted a less cluttered setup - so when all these partitions were created, particularly 'D' & 'E', i was perplexed as to why they were created.
I have been having problems starting up windows. I have a SSD in my laptop and I'm not sure if it is failing, or if my windows files are corrupt.
1.Windows will sometimes start, allow me to log in, but then freeze as soon as I get to the desktop.
2.Windows will start up to the login window and then freeze.
3.Computer will start, have a blank screen, but still have mouse that i can move.
4.Computer will start with error "hard disk (3f0)
Laptop does all four of these in varying order, but most often it would do 2.
I have not been able to get it started into safe mode yet. (freezes up before getting there).I do have a bootable flash drive with Ubuntu on it, but when it boot, it doesn't recognize the hard drive.
Tried looking this up online, but couldn't find any specific information. I'm running on Windows 10 Home, and I have a Windows 10 ISO I want to put in a flash drive so it's bootable. How do I do this?
View 3 RepliesAfter the recent update I had some problems and decided to reset my system. For some reason I could not boot from my bootable backup drive or a bootable USB drive. I have software which came with the external drive and it previously backed up and created the bootable USB drive. So, I reset the pc and of course it wiped out all my programs like the backup drive software, Ccleaner, Malwarebytes, etc. etc.. I reloaded the software for my backup drive and then was able to restore from the image which I had previously created. Of course I had to get the update again but it went well yhis time. All the programs were there and my system is operating flawlessly once again. The image backup was a lifesaver.
I highly recommend the external usb backup drive for recovery purposes. It was extremely easy to create the bootable image backup (for recovery) and keeps a running backup as well. There are numerous ways to create a backup but this was just too easy and, as it turned out, worked well for me.
I cannot seem to install any other way. Media Creation Tool will not start. When I mount the ISO and click on setup I am given a small, rectangular blue window that says "Windows", and it disappears after a second. I have a tried through Windows Update and get fail code 8007005. I also have been notified two separate times through "GetWindows10" icon that I am ready to install and once received the 80070005 code and the other time the famous "Something Happened" screen.I was able to create a bootable flash but my understanding is that I can only perform a clean install if I boot with it and would need to purchase an activation code.
I am running Windows 8.1 64-bit on an HP Pavilion 15 series laptop and I am able to successfully update anything through Windows Update except Windows 10 upgrade. All of my other *.exe files start fine except Setup on Windows ISO.
I upgraded my PC from W8.1 to W10, all went very smooth. I then worked on upgrading a laptop SSD drive to from W8.1 to W10 which I planned to then install in my wife's laptop. It was easier for me to upgrade the drive on my PC then swap the drives than take her laptop for awhile. Well...that created my problem. I had 2 drive C's on my PC.
I was able to boot quite a few times between the drives (swapping the primary drive in BIOS). But then W10 "fixed" my drives, and now I have only one C drive (the SSD laptop drive) and my original C drive is now F. My PC now only boots to the SSD C drive and I'm not able to use Disk Mgmt to swap the letters. Disconnecting the SSD drive stops the PC from booting because the original C drive is F.
How to either swap the drive letters or remove the SSD drive and somehow be able to rename the F drive to C.
Here is the issue I am currently at:
I have a Surface Pro 4 that I want to set up a Dual Boot on. I normally wouldn't have too much of an issue resolving this on my own, but due to the Surface Pro 4 not supporting Legacy flash drives, my standard way (Booting into a MBR Flash Drive w/ an Offline OS on it and doing the defrag/moving the files to the beginning of the drive) of solving this issue has left me baffled. I've attempted downloading Rufus and utilizing a MBR ISO (Which failed, since it didn't have the EFI boot sector on it), going back and forth amongst various methods of removing secure boot (which was a doozy at first, after having to go through recovering my BitLocker key) in order to boot from legacy, all to no avail.
Basically, I want to take my SSD, and move all the files to the beginning, which I can't do in Windows due to system files being in use (Ironically, a large portion being near the end of the drive). All I am looking for is a method to create a bootable UEFI flash drive that I can use to defrag/do this from. I've dug a little bit around on Linux and didn't find anything that seemed to be able to do it, as most options seemed only relevant to Windows PCs. Is there any options available to do this? Or would formatting and reinstalling it be the only option?
I have been trying to create a USB installation drive. I have the Windows10 .iso image. I have created a recovery USB drive but it doesn't allow me to access the image just the advanced options. I want to be able to do a clean install of Windows 10. So:I want to boot to the USB stick
I want to be able to format my drives.I want to be able to install a clean copy of Window 10.I have searched and searched online but can't seem to find a solution.
I've always wondered this, since people have told me that you can't copy the files from an .iso and do a clean install of windows, since it is not "Bootable", but I've actually done it many times. Maybe I just don't understand what they mean by bootable?
My understanding is that it means the USB drive can be chosen in the Bios or in the boot menu to be booted from, which is what you have to do to do a clean install of windows, which I have done many times by just extracting the files from the ISO with daemon tools and copying them to a USB.
To clarify, I am not "Upgrading" by running the USB while logged into windows, I am going into the bios and selecting the USB drive to boot too, and it automatically starts the windows installation, where I can then format the drive and install windows to it. Am I not really making the USB bootable?
I have a dell inspiron 7000 and recently reinstalled windows 10 into my laptop after I received a system thread exception not handled error with a bootable usb. After painstakingly spending a whole day (10 hours) I succeeded in restoring my laptop with windows 10. Nevertheless, I accidentally restarted my laptop while the bootable usb is still in the usb drive and now my laptop does not even load/boot. The screen just freeze trying to load up the OS as in the spinning dots when the windows first loaded up, after 3 dots loaded, the whole screen freezes. in addition, when I try to load up windows repair, it'll load up an extra dot and freezes at 4 loading dots; I can't even load into the hard-drive through BIOS. The good thing is that I can still access the BIOS and do diagnostic test and all the stuff from BIOS. Other than that, I'm unable to access my computer.
View 1 RepliesI have a bootable windows installation Thumb Drive. Can Macrium make a backup of this thumb drive so in the event of this thumb drive going faulty, I could make another Thumb drive with the backup image.
View 8 RepliesI discovered today that the new pictures folder that was created when the Windows 10 upgrade was done is not accessible to me and I am the only User and I am the administrator of the PC. When I open the security tab of folder properties it shows that I have all permissions but I still can't access the folder...
View 8 Repliesmy question is about Partitions in Windows 10.
I have three-
100MB (created from Windows 7, which I knew was needed for booting)
C Partition (Windows instllation)
450MB (created after upgrade)
So, do I still need the 100MB? and what is this new 450MB used for? Disk Management says that is empty. I don't want to delete anything for risk of making my system unbootable.
So, i wanted to change my game of thrones theme since i found a new love for CS: GO. but the lower balk is missing (screenshot of windows 7). I'm not familiar with windows 10 customization yet. How do i edit my theme?
View 3 RepliesI have a windows 10 64 bit computer which was upgraded from windows 7. I tried to do a restore but it came up saying unable to complete. Since then I have been unable to boot to windows. HP screen comes on and I am able to access Bios and Boot menu but that's where it stops. HP diagnostic tool at start says everything passes. I wanted to try booting from disc. I have another machine but its running windows 10 32 bit. Any way of creating a 64 bit boot disc from my 32 bit machine.
View 9 RepliesI have just created a system image to disc, and I would like to know how I go about verifying that the disc is working. When I say disk it took 5 hrs and 19 disc's to finish.
View 3 RepliesI have just upgraded to Win 10 about a week ago. Several times I have looked for recently created documents and could not find them right away. They eventually appeared but they should be there right away.
Example: I saved a docx file and then saved it as a PDF document, but neither file appeared in the folder I saved them to when I wanted to attach it to an email (did not see it in the Mail app client attachment dialog, nor in File Explorer, nor in my business's email web site attach file dialog box). I had the document still open, so I saved it again, in a different folder and then saved a new PDF. Still unable to find it to add it to the email. Eventually, the files both showed up but I had to wait about 10 minutes (I think).
I have an Acer PC which was running an OEM version of Windows 7 SP1. I upgraded to Win10 using the regular upgrade process, and then created a boot disc using the MCT for installing on my new SSD. All went well, I was activated so I wrote down the Product ID (which I thought was my Product Key) and installed my new SSD. Installed Windows again, but in the process accidentally formatted the original HDD, which I wasn't concerned about because I had backed up my personal files and was looking for a clean install regardless.
Now I have 10 installed and running fine on my SSD, but it won't activate. I don't have the original successful install on an HDD anymore, and my OEM Windows 7 copy isn't available to recover to anymore either. I guess if the only option is rolling back to 7 and starting this all from scratch, how do I go about that, assuming I only have a Windows 7 .iso from the internet?
As the title say, is there any workaround to avoid creating 4 different partitions during a clean install of Windows 10?
Here is a sample of what I mean:
[URL] ....
I think one is necessary and unavoidable (the MSR one), but the other ones should be used for optional services that you may not require, like restore etc.
I couldn't find a work around yesterday and in the end I gave up and accepted those 4 partitions...