Booting To Black Screen After BIOS
Nov 17, 2015
I was using Windows 7 for about 2 years until I stumbled upon Windows 10 last month.I upgraded to it and used it happily for 2 weeks,give or take.Then the problems occur.
One day,after loading to BIOS,it booted to a black screen.No login screen,no cursor,nothing.I tried using the Windows troubleshooting utility and I've exhausted every option besides the wipe all your data option.
I tried booting with cmd, but it didn't do anything.Resetting PC with files intact also did nothing.Startup repair was the same case.System restore did not let me roll back due to some technicality.
In the meantime,I've tried installing Windows 10 on my other HDD,only to face the same issue after I rebooted.The Windows Media USB also did not work.
I'm really out of options here as I need to get some of my files out from my Caviar Black before I reformat it if I have to.
EDIT:For context,I sold my SSD and got a Caviar Blue 1tb.
View 1 Replies
Similar Messages:
Nov 8, 2015
I recently upgraded to window 10 from window 7 with iso file. I didn't had internet access then, but my window run successfully. Later, when i tried to attach another display with Laptop it did not detect it. So, i installed the windows updates. But after installing i was unable to boot into windows. A black screen with blinking cursor appears right after the Dell Logo. I am only able to go into bios setup by pressing F2, no safe mode option. I tried making a bootable Pen drive for repair but even it wasn't detected. I already change the boot priority in bios menu. Therefore i am unable to fresh install the window as laptop cd drive is not functioning from quite some time.
View 3 Replies
Nov 10, 2015
My pc which i recently upgraded to windows 10 a few months ago without any issues, now its not booting up windows. It starts and i can access the bios page but after that i get a black screen with a blinking small dash/line.
View 2 Replies
Mar 5, 2016
Booting loop, shutting down before you can reach the bios. Originally a response on this topic: [URL] .....
I have the same Problem here with my gigabyte z97 hd3 v2 motherboard in my PC. I had this problem one time before, then I tested everything 'literately everything' and I was done with it after a week of testing. I did put everything together and turned it on.... It Worked ! but how ??? I don't know.
[URL] ....
View 1 Replies
Jul 30, 2015
If you have an on board Intel graphics controller as well as an add on graphics card, windows thinks you have one more monitor connected than you actually have. so when windows loads its outputting the video signal to a bogus monitor.firstly wait long enough so the mouse cursor to appear when you move the mouse.(blank screen with a white mouse cursor).Then press the space-bar and enter your login password or pin (yes your doing this blind)
You should now be logged into windows.if the desktop dose not appear after 30 seconds then press WindowsKey-P down arrow twice and enter.
View 9 Replies
Sep 8, 2015
I have a Samsung laptop. I had Windows 10 for about 2 weeks and everything was fine until last week. When I press the power button, the Windows 10 icon appears with the loading icon. After that, I'm getting a black screen for about 3 minutes then my login screen appears and everything is fine after that.I thought it may be something corrupted with my OS so I decided to reinstall Windows 10 from scratch and not to keep my files and programs. I found out yesterday that this wasn't the solution to my problem because I reinstalled it and it keeps making it again.
View 2 Replies
Jan 8, 2016
My PC has been acting up for about a week now. I have 2 Samsung 24inch Monitors and a decent gaming PC. I have tried all the options this forums has brought to me such as control alt delete and recovery mode, nothing has worked so far. I have just upgraded from 7-10 and it just wont start up without booting to that black screen.
View 2 Replies
Jul 30, 2015
I have a dell insperation and after having upgraded to windows 10, I came across a few issues. The update when well and windows 10 is working on my laptop, however, I have an issue where I am presented with a black screen when i start my computer. I do see a dell screen and a windows boot screen before it goes black so i know the issue is not a hardware issue, however after the windows boot screen passes (the one with the blueish window icon) the screen goes to black, but it is still on (meaning the monitor is still turned on just not displaying anything). The reason i know that windows installed fine is that external monitors do work, just not my laptop monitor. I have already reinstalled windows 10 and have made sure all my drivers are up to date. Windows 10 is just not recognizing my laptops screen as a usable monitor.
View 9 Replies
Feb 3, 2016
I did an update a week ago and after that Windows 10 will boot to black screen without cursor.
When booting I get sometimes "Automatic repairs", I see the initial logo. After some minutes the screen goes back and that's it.
When I try to boot from an USB the same happens - I cannot get even to re-install Windows. The USB works on another PC just fine.
I booted from Linux and deleted the hiberfil.sys file, checked all the partitions of the disk (in this case SSD) with GParted- no issues.
I really don't know how to get even to the advanced options and try to reset or run command prompt.
View 8 Replies
Sep 21, 2015
Today, Windows 10 decided to act up.When I turn on my computer, it boots my UEFI interface, the Windows 10 loading screen with the spinning dots and then a black screen with no cursor.
It's not my 7870 or monitor as I tried it using the motherboard graphics and my other monitor.
In Windows 10's troubleshooting menu, System Restore won't work because of some file being deleted.Startup Repair requires a successful boot to enable Safe Mode, which I can't.Resetting with all files intact gives me the same result.Rolling back to Windows 7 is impossible due to Windows 10 deleting all my Windows 7 files.
What do I do aside from formatting?I need the files inside that HDD.
View 1 Replies
Feb 10, 2016
My laptop is running windows 10 32bit pro and ever since upgrading, the computer boots to a black screen but there are other times it will boot up correctly....
View 1 Replies
Aug 8, 2015
What does it mean when you see a black screen that has a grey flashing dash located at the top left-hand corner of the screen? It moves down a bit before finally moving onto the Windows 10 logo, where it sometimes gets stuck and reboots (and the grey dash screen appears again before moving on).
I noticed this issue both during upgrade (when it failed and tried to recover the installation) and after installation. This issue occurred on an Acer Aspire Z5801. It does not occur on Windows 7.
View 2 Replies
Aug 4, 2015
My PC crahes and BSOD at randowm times, no pattern to it really.
I also sometimes have problems booting the pc, it just hangs on a black screen and will only eventually boot if i turn it off and back on.
Attatched the crash file
View 2 Replies
Feb 3, 2016
Recently I've changed my Mobo, CPU and RAM. Installed Windows 8 Pro Retail and upgraded to Windows 10 Pro. Worked perfectly and no problems
But I've noticed that if I need to restart the system I will get the usual Blue screen saying "Restarting", this will then goto a Black screen.
Nothing happens after the black screen, I never see my BIOS image or any text whatsoever (Which I usually see on a normal boot). IF I then press and hold the power button to force shutdown the computer and then press it again it will perform a normal boot, I see the BIOS Image etc.
View 7 Replies
Aug 24, 2015
Installed Windows 10 on HP Pavillion p7-1262 about 2 weeks ago. Worked fine up until last Friday, screen went black, no keyboard entry, no mouse cursor. Can't enter BIOS. Whats wrong?
View 3 Replies
Sep 22, 2015
Yesterday I got a notification that my windows 10 upgrade was ready on my MSI GT60-0NE laptop and decided to give it a try because I really disliked windows 8.1. Windows update went through downloading the files and preparing the computer for installation. It then did the usual, configuring updates on the blue screen, got to 100% and just shut down completely. I left it there for about 5 minutes and decided to try to power it back on. When turning the computer back on, it stayed on for about a minute and then cut itself back off.
After waiting a minute it turned back on, then back off again. It kept repeating this for about 5 minutes. During this phase I saw absolutely nothing on the screen, no MSI loading splash screen, no cursor, absolutely nothing at all. I couldn't enter the BIOS, couldn't run recovery or even get into safe mode. Absolutely nothing worked. The battery light was also flashing blue which I had never seen before. During this time the hard drive light was flashing and flickering the usual red light.
I did a hard reset on the computer and then turned it back on. When i powered it back on the screen was still completely blank, no MSI splash screen, no cursors, couldn't enter the BIOS or anything. During this time the hard drive light was a steady red. The blue battery light was no longer there and it was back to its usual constant red light. After about 10 minutes the computer turned itself off. Being frustrated I left it overnight and tried again this morning.
When I power the computer on now, there is no hard drive light. It doesn't even give a single flash of red. The computer will stay on but just stays there at the black screen. I've tried to look for solutions but I can't get anything to work. The only thing I can hear running is the fan.
I've tried to remove the hard drive and boot to see if I could get into bios, still a black screen.
I've tried removing the video card and booting to see if I could get anything through integrated graphics, still a black screen.
I've tried to plug the computer into another monitor, still a black screen but it does recognize the signal.
Specs for the GT60-0NE 403-US:
Intel Core i7 3630QM (2.40 GHz)
Nvidia GTX 680M (4GB)
Windows 8.1 64-bit (Windows 10 now?)
View 1 Replies
Aug 23, 2015
My wife purchased a Dell 8700 XPS with i7 4790 processor,16GB ram. and Nvidia GeForce GTX 745 4GB and a 2 terabyte hard drive. She also purchased a Kingston HyperX 120 GB SSD. I used a popular software to migrated Windows 8.1 Home to the SSD from the HDD. This seemed to work well but on booting up the system the HDD boots unless I go into the bios and select the SSD in SATA 2 under the DVD reader/burner and select a {boot manager on Disk 1{ which was installed by migration software. I had hoped to format the HDD and use as data disk afterwards.
I noted that some threads mention I should have disconnected HDD when booting from SSD first time which I did not do.It also appears that the OEM partition is still on the HDD. I believe a clean install is required. Will this also remove the > boot manager on disk 1> line in the bios.
View 9 Replies
Oct 15, 2015
I am booting from bios to a usb and installing windows 10 on a 250gb ssd and it get to about 77-82% and the spits out the error 0x8007025D and I cant get it to go any further. I have used the media installation tool to install on three separate usb's and still get the same problem.
Here are my specs
CPU: i7 6700K
MOBO: ASROCK Z170 K6
RAM: 2x8 DDR4
GPU: RADEON R290x
All that's plugged in is the ssd, monitor, ram, and keyboard/mouse ...
View 1 Replies
Feb 26, 2016
So, this is a really weird problem I've only JUST started to encounter. I went to go overclock my CPU, as I've been playing FF14 a lot these past few months and figured an overclock would work out with the events taking massive chunks out of my framerate whenever I go near a populated area.
So, the Overclock failed, and I had to restart my computer and go back into the BIOS to reset everything to factory. This is where it gets weird. Now, whenever I boot up my PC it'll go into Windows but give me a 0xc0000225 Error. But, when I go into BIOS and go into the boot menu and boot my SSD from there, it works flawlessly. It's not a /massive' inconvenience I suppose, but it's still baffling.
I've got an Asus Z97-A Motherboard.
View 1 Replies
Aug 27, 2015
I upgraded from windows ultimate to windows 10. my computer boots through everything and finally brings up my old windows 7 desktop screen and then everything goes black, but mouse shows up on black screen. Is this a driver problem with windows 10? However, before the black screen appears the new start button and screen appears as the windows 10
View 1 Replies
Aug 15, 2015
how can I make Windows 10 boot to start screen automatically like it did in WIndows 8.1?
View 2 Replies
Dec 7, 2015
When running windows 7, for the first few seconds upon booting my laptop, it would display a startup message,
"Press ESC for boot selection, F2 for setup, etc......."
Now, nothing. I cannot choose to enter setup, BIOS, get to ESC for a boot selection screen in case I might want to boot from a flash drive or a floppy just once. How to get it back either.
View 2 Replies
Jan 9, 2016
When i boot my pc up, it can successfully go into bios, but once it reaches the windows logo where there is usually a loading indicator underneath it, it freezes. the loading indicator is not there, it seems that my usb ports quit working (my keyboard and mouse stop lighting up).
I've been having this problem for quite a while now ever since i upgraded from windows 7 to windows 10 however i was able to successfully do a usb boot and wipe my hard drive and install windows over again, and I've been completely fine for about a month now, but the same thing is happening again.
I am guessing it is a corrupt windows file but i find it odd that its recurring even after i did a total wipe. Also I ordered a new ssd (500gb samsung 850 evo) to replace my current hdd, maybe that will fix this problem? I am also planning on upgrading my cpu, mobo, ram, and gpu soon. i will leave my current pc specs below.
cpu- AMD Phenom II x4 955
mobo- Biostar TA790 GX 128m
gpu - Zotac GTX 560 1gb 256 bit DDR5
ram - 2x2gb DDR2
I have not found any problems similar to this online. to make things clearer, i cannot get my pc to do a complete boot at all. it always freezes on the same screen, the only way i can get out of it is to do a force shutdown. I am starting to think that perhaps the problem may be my video card? also i do not have any spare parts or other computers to switch parts and test unfortunately.
After doing multiple things to find a fix (swapping ram slots, unplugging hdd and gpu and plugging back in, etc.) while on the frozen windows logo screen i unplugged my mouse and keyboard, plugged them back in, hit the restart button on my pc, and.. it started up? now i have noticed lag-like performances with my mouse (razer deathadder chroma) its as if it loses connection for a split second and the lights on it will simultaneously flash. the mouse is only a month or two old and i do not remember if i had problems with my old mouse.
I have just plugged it into a usb port that is on the side of my pc instead of plugging it into one of the back ones. I will update with if needed for the "lag" however i am still concerned with why exactly it froze like that during boot up. im not going to shut down my computer until i know what the problem was and how to fix it. ill just keep it in a low power setting when i am not using it.
View 1 Replies
Mar 15, 2016
After using powershell to run a system scan and having it hang, I restarted my computer to sort it out and now I'm left with this info stuck on my screen.
View 4 Replies
Feb 20, 2016
After Windows 10's failed attempt to reset, it asked me what I want to do next, try to reset again or return to Windows. I gave up and "returned to Windows" only to discover that Windows is gone and I can only get to BIOS (which I can enter). After the BIOS screen comes a black screen and it appears that the system tries to write something but can't, and only shows underlines, and restarts (but the power remains ON, it doesn't shut down completely).
View 1 Replies
Jan 4, 2016
I currently have a Windows 10 laptop that was working without issues for a while, however after a restart the laptop appears to load windows but never get to the login screen, only show a blank screen with only a mouse icon visible.
I have tried various Windows supplied options with the following outputs:
1. Boot into safe mode (with and without network) - this again only loads to a blank screen with only mouse icon visible
2. Window reset - appears to get stuck on 8% - only to show an error saying reset could not happen, reverting changes (option to reset with files saved was chosen - as current files are required)
3. Start Up Repair - issue not resolved
4. System Restore and System Image Recovery - N/A as Windows cannot find previous image or restore point
5. Booted in Low-Resolution video - again same
View 4 Replies