So I've waited for the notification to say that Windows 10 is ready to install and the installation got stuck on a black screen with a blue windows 10 logo. Now it says my Win 7 is invalid. So I made 2 bootable usb. One using Rufus and another using the Windows 7 USB DVD Download Tool. Same issue occurs with both. I am thinking of installing Windows 8.1 and try to upgrade from there but before I do that.
View 1 RepliesI currently have Win10 32bit. I made a bootable USB and DVD to upgrade to the 64bit version, both yield the same results. Each time I try to perform a clean install, it just hangs at the blue windows logo, no spinning circle just the logo. I let it sit for about 4 hours and nothing changes. I've tried many methods but none seem to work.
Core2Duo 3ghz
4069 RAM 560ti video card
1 terabyte HD.
Intel P35 BIOS for P35-DS4 F12
I also have my hard drives partitioned
Legacy mode BIOS
So I got a new laptop - MSI Dominator Pro GT72. I added two 8GB sticks of RAM on top of the current 16GB currently in it. It also had two Kingston m.2 SSDs in RAID 0. It was running with out any problems what so ever. I decided after that I actually wanted the ssds as two independent drives. So I removed the RAID setup and did a clean install of Windows 10 back on. That seemed to install all ok.
Then In the process of installing the drivers from the provided MSI disc it hung and then restarted. Then ever time after on login it froze a few seconds in. I thought I'd try a clean install again on the other SSD this time just to see if it reoccurred. Sure did. After installing some of the drivers and using the machine it crashed again and froze on login. I even tried all the updated drivers from the msi website instead of the ones on the disc.
I've run a memtest and absolutely no errors. I've updated the bios and firmware also. I then began running verifier to see if I could find a culprit. I got a BSOD before login repeatedly. I then got down to only selecting a bare few drivers in the test and was able to login with no BSOD. When I ran verifier with combinations of drivers they worked sometimes and only really seemed to crash when i stacked more and more drivers for it to test. I'm not sure if its suppose to work that way or not.
I thought it might have something to do with me separating the m.2 ssds from the RAID. I should mention that there is a 1TB hdd also in the machine.
Don't know if this is a hardware problem or not, Trying to install W10 from USB stick on a ASRock Z87 professional board with default UEFI settings loaded.
The machine boots to USB, then shows the Windows Logo for 10 seconds, then reboots and repeats this loop so I can't even install.
System: i7 950 X58A-UD3R Rev 2.0 16gb Ram GTX760. Pretty sure it's a Samsung 250gb SSD.
So I upgraded W7 to W10 via iso. Install made it all the way.
On reboot it's now suck on the black background, windows logo and spinning dots.
I have tried everything I can think of, including the stand-alone ZA uninstall, however the Win 10 installer is detecting *something* and refusing to proceed until ZA is uninstalled:
Some Apps need t be uninstalled
These programs need to be uninstalled because they aren't compatible with the upgrade.
Zonealarm 10 (2012)
I’ve got an issue with installing Windows 10 Pro 32bit on my computer where I try to clean install windows, and after the first restart when it’s doing the ‘getting devices ready’ part, I get a blue screen- WHEA_UNCORRECTABLE_ERROR.
A little history on this issue… I started with a clean install of 10 Pro on this computer, installation went fine, computer ran without issue. After installing all available windows updates and Firefox, I plugged in a USB guitar interface device (M-Audio JamLab), and immediately got a blue screen, then the computer restarted… I didn’t catch the error on the blue screen. I unplugged the JamLab device, same issue (pretty sure this is when I first saw the WHEA error code)
I’ve been troubleshooting to the point that I gave up and now I’ve low level formatted the drive and I’m trying to clean install 10 Pro again- same WHEA error code… the most common reasons I’ve seen for this code are incorrect voltages (ex, CPU spike), hardware issues, driver issues or windows updates.
I’ve reset the BIOS back to defaults, I don’t think drivers or windows updates are the issue since I can’t even get Windows installed, and I’ve installed Windows 7 successfully since all this happened (and plugged in the JamLab device/installed drivers successfully), so if it’s a hardware issue then it must be Windows 10 that doesn’t like it.
What baffles me, is that I was able to install 10 and run the computer with no issues, then ever since I plugged in the USB JamLab device, I can’t reinstall it- is it possible that the USB device somehow caused a hardware issue that only Widows 10 is detecting/complaining about?
I have a Samsung RV511 and have recently tried to upgrade from win 7 to win 10. Everything goes smoothly until the restart after everything is downloaded. My laptop restarts and then hangs on the win 10 logo.
I tried restarted and win 7 loads up and im greet with this message once I log on: 0xC1900101 - 0x20017
The installation failed in the SAFE_OS phase with an error during BOOT operation.
I have a new rig and made a clean install with Win 8.1 Pro.
After that I directly upgraded to Win 10 Pro within running system.
Are there any advantages to do now a clean Windows 10 installation?
When i start the laptop it stops at the dell logo and does nothing till the time i dont press a key. After pressing a key it starts log in.
View 1 RepliesNew Dell XPS8700. Upgraded from Win 8.1 to Windows 10 and worked fine for about a month.
On start-up, it now hangs on the Dell logo or when trying boot options to start from USB or recovery DVD go to blank black screen. Dell phone support sucked but they sent me a recovery USB drive (to factory set Win 8.1), however start-up would still hang at the Dell logo. Tried all different boot combinations from CD/DVD, USB, OS/Boot partition but cannot proceed beyond Dell logo or black/blank screen. I do not have a original Windows 10 OS disc, however did a download from
HTML Code: [URL] .... to USB and PC does not boot up from that media either.
Used an original Windows 7 Ultimate installation CD to start and get to command prompt to recover files from C: drive and can browse through all folders and files. Copied user data to USB drive. So HDD appears OK.
I just want to create my own Win10 here, but when I setup the VMs, and running it, It wasn't go well, It froze!
I have tried add the size to 21GB, using UEFI, and deleting the EFI folder, but still not working
I had a licensed windows 7 PC and did the in-place upgrade to windows 10. However my main hard drive (an SSD) is too small and I want to upgrade it. I understand that if I do a clean install (from an ISO/USB) then windows 10 should still recognise my PC as it was activated.
However, if I change the hard drive (or add memory, add a graphics card etc) does windows still recognise my PC or do I have to go through the stupidty of installing windows 7, installing the service pack, waiting for the inplace upgrade to windows 10, activating, and then wiping everything in order to do a clean install!?!?!
i did the win 10 free upgrade i had to before i could do a clean install. im not having any problems with the upgrade so far but i have always did a clean install of windows before this.
View 1 RepliesI upgraded from Win 7 pro about a month ago hoping that would cure some problems I had with Win 7. It did not and Win 10 is working poorly too. I would like to do a clean install of Win 10 but not sure if I can get the correct Win 10 install file just from my Win 7 pro product key. Is there a download source for that since I have already upgraded to Win 10?
View 9 RepliesI got a legit copy of windows 7 and i did the update to windows 10, but my PC seems slow and it seems like there is a lot of junk and left over files... idk, i want to do a clean install, but i dont want to loose my genuine copy of windows. also, i have about 1tb of games installed on a seperate drive off steam. if i clean install and leave that drive as is, will the games still work or will i have to redownload them all?
View 9 RepliesI'm finally thinking to upgrade from W7 to W10.
Here's the situation at the moment:
1) 256GB System SSD
2) 1TB data HDD
3) 3TB Raid 1 HDD for backup
I want to mount a new 500GB SSD as primary system drive, so I was thinking to use this occasion to put W10 into my machine.
So my question is: Can I update to W10 as it is and then do a clean install changing the primary system drive while keeping the license?
I upgraded from 8.1 (genuine Sony Vaio ) using the media creation upgrade option, it installed and activated to windows 10 pro.
I then used the same media creation tool to download the iso and used Rufus to put it onto a usb so that I could do a clean install.
I installed it and skipped the parts prompting for a product key, however once it loads up when I try to activate it states 0xC004C003 details section says the key has been blocked?
Have I missed something?
There is a lot of questioning about making a clean install of windows 10 once you upgraded from Windows 8.1 retail version.
So there it is :
-If you have NEW hardware : So if you want to make a clean install of win 10 on you're new computer (actually it all depend on you're motherboard). You will need to re install windows 8.1 with you're licence that came with (Of course install it on you're new comp). Then you have to make the free upgrade again. In other words you have to restart from 0. And yes you're license is still good for windows 8.1. After the free upgrade win to 10, it will save you're new motherboard with you're microsoft account to the microsoft activation server. Well, its good as long as the upgrades are free (One year from the launch)!
--So for later re install, as long as you don't change you're MotherBoard,you can start from the Win 10 installer and you will not need to enter any license key. You just skip these steps and when you get on the internet and log on to you're microsoft account it will auto detect you're account with you're mobo and activate automatically. In other words, there is no key from free upgraded windows 10
-If you don't have new hardware : Well its very simple, you mobo is already saved with you're microsoft account so you can just install you're win10 from the installer. You do not enter any license keys and it should activate by itself when you connect to internet.
I think its always good to have a retail version for the actual system that we use with a good license key.
Received a MSI laptop with pre-installed W8.1. Planning to install a new SSD on m.2 slot. I have several options to update to W10.
p.s: I am keeping both SSD and HDD in my laptop
1) Clone from old HDD to new SSD using MSI burn recovery. Then update to W10
2) Upgrade to W10 on my old HDD. Get W10 activated. Perform a clean install on SSD. Lastly, format my old HDD as secondary drive
I recently upgraded to windows 10, and decided to do a clean install. So I made a image of my system (when it was windows 8.1), wiped my Hard drive (which still had the original windows 8 install,), and stuck a ios file on a usb stick. However during the install to my SSD (Which is different from my hardrive) the computer asked for a product code, something I do not have, and did not think I needed (my understanding was that windows 10 registered your hardware). If I skip it, it goes though the prossess of installing, but then restarts after finishing moving the files. I dont want to have to attempt to go though the effort of putting windows 8 back on the laptop, moving it over to the ssd, upgrading to windows 10, getting a product key that may or may not work, and trying it again.
View 1 RepliesSo I have an upgrade reserved from Windows 7.
I want to know if I can use the free upgrade to perform a clean install on another SSD.
I have a feeling this is bios/uefi related
Got a sabertooth z77 with two ssd on raid 0 (intel) another hard drive for backups (Regular sata) and another storage card (pciexpress sas highpoint 2720, with raid 5)
Windows 10 doesnt seem to like this.
Even booting the dvd itself its a drag and hr wont recognize the raid 0 not even with drivers (driver load will cause a watchdog blue screen)
Windows 7 and 8 dont mind. At all.
I feel like the csm thingy might have something to do.
Bios is latest. Sas raid is for storage only. Ill search for the manual of the board as the printed one doesnt have the options i got on the screen
I've read the instructions on various websites.
I had Windows 8.1 Home activated and updated.
Upgraded to Windows 10 Home. It activated and updated.
Did a clean install of Windows 10 Home and it won't activate. I skipped both key input screens and it says my key is blocked.
I have a laptop that was originally on Windows 8.1. I upgraded it to Windows 10 recently, however there were a variety of deeply embedded issues. I tried every troubleshooting method I could find, tried to revert back to 8.1, and tried to repair and reset Windows 10. Nothing was working, so I had to use installation media from doing a clean install on my PC to install a fresh version of Windows 10 on my laptop.
I was forced to format the hard drive, and delete all the partitions to even get the clean install to work (the upgrade did a real number on my initial system), and because of this I'm now unable to activate Windows 10. The upgrade was the Home edition, and I clean installed the Home N edition (as far as I'm aware there's little to no difference). I made a note of the product key that was listed in the upgraded 10 before the clean install, which I assume was my product key from 8.1 that carried over, as it is 20 characters long and not 25.
Is there any way I can activate my clean installed Windows 10 Home N in this situation?
I did the upgrade on my Laptop from 8.1 to 10, went smoothly everything works so far. Now i have to decide do a reset and do a clean install since i always worry if later there will e a problem, should i safely think if no problems now that if i reformat a clean install that all drivers will be there and everything will be ok. Tomorrow i do my Alienware Aurora R4 desktop and prey it goes well. Then since i have 30 Hard Drives that i will be able to do a network share and be able to see it on my living room TV, will pray.
View 9 Replies