I broke the Acer R7 touch screen. The break in the top right corner causes the touch screen to randomly change the mouse focus even if I do not use the laptop. The crack in the screen takes focus away from the login prompt box as I type in my password.
It was using Windows 8.1 and with some difficulty was able to disable the Devices>Touchscreen Then it worked fine when touchscreen device driver was disabled.
I then upgraded to Windows 10 which re-enabled the touchscreen However the touchscreen mouse movements wont even let me login.
I would like to disable the Windows 10 Device>touchscreen driver as I did in Windows 8.1 But cannot even login.
I had an initial fault with Windows 10 where the start button disappeared so to switch it off I used Alt/F4. That brought up a small screen that allowed me to shut down . The next time I tried it I looked at a couple of options and chose sleep mode...Big mistake. I cannot wake up the screen at all, the computor itself will switch on and off mit the power switch but nothing appears on the screen, it is blank. I have tried hitting various buttons on the keyboard to no avail.
I have a Lenovo Thinkpad Edge with an Intel I5 processor, 64 bit with no hardware upgrades (stock). I had accidentally stepped on the screen (fell off my lap and then crunch) which was mangled beyond repair, so I have been using it similar to a tower, with a VGA and/or HDMI connected monitor (my HDMI cable went bad, I picked up a new cable but hadn't hooked it up to the second monitor. I started my free upgrade from Windows 7 Home Premium to 10 last night. I woke up to the black screen/mouse pointer issue which is what brought me to this thread. I tried the recommended fix:
1. Hit ctrl, type in password and enter 2. Win Key + P + Down Arrow. (Win Key + P only seems to do the same thing)
This brought up options to
1. Disconnect projector (Tried this and lost connection to the VGA even after reboot) 2. Duplicate (Screen is still black with mouse cursor, but I saw a little bit of red and blue pixels at the bottom where the task bar should be until I disconnected and re-connected the VGA, then it was back to black screen and cursor) 3. Extend (still black screen and cursor) 4. Connect Projector (still black screen and cursor)
I'm not sure what to do. I must have some OS installed, because I am able to also perform these operations from my USB Keyboard/Mouse. I'm just not sure how to get Windows back on my VGA connection (I haven't tried HDMI because I did not have it connected when I ran the update.) I thought Duplicate displays would do the trick, but apparently not. For as beat up as the laptop is on the outside, the hardware performs fine. I also have a 2nd laptop (work laptop, also a Lenovo W541) that I can use if any solution involves downloading something bootable.
I upgraded to Win. 10 8/3. Everything seemed to work fine for 2 days. Then yesterday, the 5th, I could no longer scroll sites up or down by touching and moving my fingers up or down. The other touch functions still work, like going to links or sites, the 'click here' (touch here) options, close,etc. I can even scroll by touching the scroll bar and moving it up or down or right or left. My fingers don't scroll anymore unless they move the bar. And I just noticed areas on the sites don't get bigger or smaller with just fingers touching them and moving them farther apart either. But I don't know if that's supposed to happen. It did with Win 8.
My Lenovo Flex 15 has lost its touchscreen capability after the Windows 10 upgrade. I have tried the common solutions like deleting the drivers, doing a driver roll-back and running the Windows hardware troubleshooter, all to no avail. Before I restore to Windows 8.1 ...
Running windows 10 on my ASUS Q550LF and touch screen does not work. Device manager shows that I have two graphics cards (Intel HD graphics family and NVIDIA GEForce GT 745 M) and they both have the exclamation point next to them. Both drivers are up to date, yet the touch screen will not work.
i can't scroll using touch screen in my browser or photos or anywhere else after the Windows 10 upgrade. is there an update coming or are there any settings for the same ?
I know there are not to many people who like the touch side of things, but I have just installed 10 on a touch deviceStar Screen is the default, looks exactly the same as 8.Apps all launch maximized on the desktop (not the new full screen option).
On W8.1, it'd appear on just about every blank box I'd touch with my finger. Now it almost never appears, for anything. Is this supposed to happen, or is it a bug?
I have been having a problem with disabling the touchscreen in my windows 10 laptop. At one point, my laptop fell on cement. Luckily no hardware was damaged except for the screen's glass, losing its touchscreen capability. The problem is that the screen keeps recording false touches, making it difficult to get work done. I took the liberty of disabling the screen on Device Manager, however, after a few boots, the touch screen was somehow re enabled. I tried uninstalling the device, but it is built into the windows operating system and would simple be re enabled at the next boot. Is there any way to keep windows from recognizing the touchscreen without physically removing the touchscreen?
If there is a pie control for windows tablet like the ones for android. I want to buy the surface pro 4 and I would love to have pie control for many reasons.
My touch screen randomly won't work, only to find that it's disabled in Device Manager. "USB Input Device" is what it shows up as. I believe it's a software I have installed that may be interfering.
I use Chinese Tablet Telclast Air 3G come with Windows 8.1 with Bing upgraded to Windows 10 Home.
Now I have problem with touch screen which I need to re-calibrate every time I turn on after turn off and charging tablet. When I turn on tablet touch screen is mess and I need to use external keyboard to log in and re-calibrate touch, if I turn off tablet with out charging it after turn on it work fine what can I do to solve this problem?
I never had this issue with windows 8.1 and after I upgrade to windows 10 it work for a few week then this problem occur.
My spec: Intel Atom Z3763F Ram: 2GB Intel On Board graphic card with latest driver
I re-installed win10 on my ASUS Q302LA laptop after completely wiping the c: drive using Ubuntu. I installed Ubuntu in order to delete the "Old windows" folder, which apparently can only be done from windows if you have god or "trusted user" status, whatever the hell that is. After installing over Ubuntu using win10 from an iso optical disk, the usb ports and device manager no longer register my seagate external hdd. Now this is scary because the seagate is a "backup" drive and now it's useless. It's still good and works fine with my hp elite so nothing's lost, but the idea that were I not to have a second computer my data would be unaccessible by the very products supposedly designed to keep it safe. The touchscreen feature is also non-functional. I'm not sure whether this is a win10 problem or an ASUS driver problem specific to this computer.
Edge swipes no longer work after latest update, all other features of touch screen work but no edge swipes to bring into view currently used apps screen or control centre . (left and right edge swipes)
I am using a Dell Venue 8 Pro with Windows 10 installed. Everytime after Windows Update reboot, the touch keyboard will not be shown on the Logon Screen. I have to use image password to login, and it will resume normal until the next time another Windows Updates are installed.
My printscreen key (PrtSc) was working perfect yesterday. I restarted the laptop today and it is no longer working.
I used to simply press on the key and the images were automatically saved to my dropbox folder, that is no longer the case.
Windows 10 asked me to update the dropbox and since then it no longer captures the screen with a single touch (It does however capture a screen image when I do the win key + PrtSc).
Since I've upgraded from Win 8.1 to Win 10, I can't turn off my PC without getting an exception in .NET Framework, and then a message that it is preventing shutdown. Google shows that this problem isn't exactly new and already happened to some people with Win8, but for some reason I've not been able to find a working solution yet. Any way to fix this other than doing a clean reinstall (which I really don't want)?
I've already tried some ".NET repair tool" from Microsoft, downloaded various offline installers of .NET and tried forcing them to re-install via command line. No luck - they just keep telling me that .NET is already installed, already a part of the OS, or sometimes even "installed but not activated", which is just plain wrong according to the feature selection dialog...
Having problem with a computer that will not shut down completely after Windows 10 update? I have one and discovered that if I turn off the fast start option it will shut down all the way.
I frequently visit a banking website. Every time SmartScreen prevents being unrecognized app from starting. I start it every time by pressing more info and then Run anyway. Is there any way by which I can add this website as an exception to SmartScreen filter so that it starts immediately bypassing the filter?
I did a bit of research and this seems to have been an issue for a while, or has been in the past. Was upgrading to windows 10, I first had to restart my pc cause it was initially stuck on that preparing to install problem with the green bar being stuck around 25%.
It then got through that and began the installation process with the big circle and rebooting process. However around 91% when I last looked at it it was just black screen, this stayed this way for about 3-4 hours. I then decided to reboot the pc and it has now booted to the login screen. Is this a known bug or could there be a possible issue?
The problem seems a bit different as some people I saw have had to fall back on PC restore points etc. So not sure if it installed or what could be the problem.
Also side note, I upgraded my pc when windows 10 first publically released, but rolled back because I had about 5min shutdown times.
I reinstalled windows the day before yesterday and since then every time I turn my laptop on after entering my password the screen turns off for like 2 seconds then turns back on. This have never happened to me before. I tried putting my old windows back via Macrium Reflect and I even tried reinstalling it again but neither of those things worked. I have an Acer Aspire V3-572g laptop.
