Outlook 2010 wont send mail after the upgrade. I have deleted all accounts and reinstalled them but I still have the same problem.
The mail just sits in the outbox. error 0x800CCC13
Since upgrading to Windows 10 I cannot send email from Outlook 2013. Mail stays in the Outbox, and I get: Error 0x800CCC13 Cannot connect to the network
I've run ScanPST and fixed some errorsTried starting Outlook in Safe Mode (Run | Outlook /safe)Turned off Windows Firewall
Still can't send.
However, doing a test Send and Receive from the Outlook Account Settings did work.
I just bought a new Windows 10 machine (HP Envy) and I'm running Outlook 2010. When I select multiple e-mails (Shift, select top e-mail, select bottom e-mail) it correctly highlights all e-mails. Then when I right click and select "Mark as Read" it removes the highlight from multiple e-mails and instead only highlights the last e-mail. I would often select multiple e-mails, mark as read, and then delete.
It's not a huge deal, but I could do this in Outlook 2010 in Windows 8.1 without issue and I can do it in Outlook 2003.
I upgraded to windows 10 and outlook isnt sending emails. It isnt an issue with our ISP this has been checked. This is really difficult as I need outlook for work!
View 3 RepliesJust had computer upgraded and went with windows 8 , , , weeks later windows 10 . now outlook 2013 will receive but not send emails ??? to clarify , it sent emails for couple of days fine
View 3 RepliesI am having trouble configuring Outlook 2010 on a new Windows 10 Pro clean install so that mail from multiple Gmail and Comcast accounts all go into 1 PST file. I would like to have 1 inbox for all 5 email accounts.
Even when I use "Manually configure Server settings" and specify an existing PST on D:Outlook, Outlook creates a new PST file on C:Users(My Username)AppDataLocalMicrosoftOutlook.
After installing Windows 10 everything looks good but Outlook does not send emails they just sit in the outbox. Account settings look ok and server message is received when tested.
View 3 RepliesSince upgrading to Win 10 last week, I have not been able to send emails from Gmail in Outlook 2013.
It was fine in Win 8.1.
My email settings are
IMAP
Outgoing server requires authentication - is ticked
Incoming = 993 with SSL
Outgoing = 587 with TLS
All other setting as normal. When I run a test it comes back as good and will receive emails, but nothing will send.
Upgraded to Windows 10.
Everything was fine for about a month until I had a disk crash. After several days I got that fixed and did a clean install of Windows 10.
Now I am trying to reinstall Outlook 2010 from the original DVD. Valid product key (setup validates it).
Setup runs, then encounters an error (doesn't tell me what), and backs off all files.
As far as I can tell, Windows 10 is saying the SETUP file is incompatible, not Outlook 2010 which Microsoft states is still compatible with Windows 10.
Can't lauch Outlook 2010 from Internet explorer! on Windows 10 Home. Gives me this error message.
I also can't install my printer. Keep getting error message saying printer driver is in use. It asks me to stop the driver so I do and then I get error message saying I need to start it! I haven't a clue how to fix it. The printer does work wirelessly but I can't use any features like Duplex printing Etc.
Since the update reboot Outlook is running in safe mode and though the reading panel is correctly set up it is closed every time Outlook is restarted. Add ones are all missing. How to sort it short of removing all the updates. I have run a repair install and SFC /SCANNOW with no problems or change.
View 7 RepliesI have Outlook 2010 on two PCs and use the Hotmail Connector to synchronise my contacts with my Microsoft Account (people.live.com).
I can create/delete contacts on any PC and at the web page at people.live.com and these will synchronise across all accounts. However, if I change details of an existing contact on the PC e.g. change the phone number) then this is not synchronised. If I change the details on the web page at people.live.com then the PCs do get updated. How to troubleshoot this problem to ensure that changes to contact details in Outlook 2010 are synchronised correctly across all accounts?
My OS is Windows 10. I have been using MS Office Outlook for my email. I've used it for years. A few weeks ago I decided to try gmail so I set up an account. I did not give anyone my gmail address but for some reason I started to get a lot of my email from friends who have my Outlook address. I even got some of the junk mail on gmail. I then shut down my gmail account as I don't like it. Then I noticed that I wasn't getting much email. So I opened my gmail account and there were dozens of email messages there. Here's my problem. I want to close my gmail account but then I'll miss all of the messages that will go there. My question is. How can I stop messages from going to the gmail?
View 6 RepliesUpgraded to W10 on Surface Pro3 and it seems Outlook 2013 SMTP emails failing to send. emails send OK on other devices and all OK via Outlook web.
When testing the setting in Outlook test email send OK but when going back into the email account email fails to send with following error:
Task 'email address' - Sending' reported error (0x800CCC13) : 'Cannot connect to the network. Verify your network connection or modem.' Used different network connections with no success.
I installed windows 10 this morning and as a result I can no longer send emails with Outlook 2013. I get the following error code: 0x800CCC13.
I did a search to find a solution and noticed that more people have this problem after installing windows 10, but no solution. In the mean time I am using Thunderbird.
After successful upgrading to Windows 10 from Windows 7, I can send emails but cannot receive mail in outlook 2010.
Getting message: Task '……….@sbi.ae - Receiving' reported error (0x800CCC0F) : 'The connection to the server was interrupted. If this problem continues, contact your server administrator or Internet service provider (ISP).'
Also successfully run the SFC /scannow tool without any error.
Trying to set up my outlook in the Win 10 mail app...have all settings enter3ed correctly...including Outlook password for my cox email account...but every time I try to sync...sync window 10 just spins..Bigger issue is if I check the password for my outlook (Cox) account...the number of characters has doubled in Win 10 Mail settings ??My Outlook account for this mail box has 9 characters...works fine in Outlook 2003...
But when I check the password in the mail app...more than 12 characters-*'s show up in Win 10 app for password.Have deleted and added outlook mail pop a number of times...but after 'save'...I always get a much longer 'password'(*****etc) in settings than was entered in setup ?
I did the windows 10 upgrade yesterday and since then my Outlook 2010 cannot send mail. It receives mail as it should without any issues. I have multiple emails accounts with different vendors and it is doing the same on all of them so I have ruled out it being a hosting issue.I have also disabled all my internet security and firewall but that did not work at all?
View 9 RepliesTo Sync your email to Outlook after doing some email maintenance, hit the refresh button. I have attached a view of the button for reference. Note if you also are looking to manage your folders from Windows Mail, I have found that I need to do that from within Outlook. Unless someone has found another way....
View 1 RepliesMy parents Windows 7 laptop fried recently, I got them a new HP 350 G2 which came with Win8.1 and i upgraded to 10. My father used to use outlook express with an email through his ISP, and the only way I see to import that email into a new account involves being on the computer using outlook express and using the migration tool. Obviously I can't do that since that computer is toast (the motherboard fried).
View 6 Repliessince downloading windows 10 have trouble sending emails in outlook 2013. receive fine, receive error ox800ccc13 cannot connect to network
View 3 RepliesI am using Mail app built in Windows 10. Office 2013 is installed with all applications. If I try to use the SendTo link from Explorer, it opens up Outlook instead of the default Mail app. In default programs, Mail has all his options checked.
How to make the SendTo work properly with Mail app?
Is there, anyway, to, possibly save web mail from Outlook.com to my computer??
I see no options anywhere to Save As in Outlook.com
I use Outlook to receive contracts and sign them in Adobe. My mail now opens in microsoft edge and it will not give me the option to sign and send back. I have tried to change my browser it will not correct Outlook mail.
View 2 RepliesMS Outlook will not send email after windows 10 upgradeI loaded windows 10 from windows 7 and found that MS outlook would not send email. After searching google I found a reference to the SFC tool.close outlookOpen a command prompt in the administrator level
run sfc /scannow it runs about 15 minuets after completion, close command window reopen outlook and you will now be able to run outlook
In Outlook, I rely on the auto fill when typing an email address. usually, the name fills in after typing one or two letters. Since upgrading to windows 10, this feature no longer works. Although the list of correct email addresses appears, when I click on it, it no longer fills in the name and I have to completely retype the email address.
View 1 Replies