C Drive Clone Won't Boot
Jan 18, 2016
I'm trying disgnosis for my Dad, who's trying to move over to SSD.
The story so far: Using AOMEI backupper bootable disk, we tried to clone his current HDD onto the SSD. Part-way through the clone process, it gives an error saying that the drive is too fragmented to clone, and stops.
We run defrag on the C: Drive, resulting in a 1% fragmented drive at the end, and try again.
The same message crops up - too fragmented. It turns out the 'recovery' partition (It's an OEM machine, so its ~10Gb rather than the normal 100Mb) is too fragmented to clone, and we can't defrag it.
So we just clone the C: drive, leaving 1Gb of unallocated space, and then use the recovery DVD's to run startup repair, hoping it will restore the MBR or 'normal' recovery partition, and make the system load.
All we get is a blue screen with a blinking cursor in the top left that persists or over 5 minutes.
Startup Repair completes successfully. According to the Log file it ran 2 iterations of the repair operations, and found no errors! However the drive still will not boot.
This is particuarly annoying as I have used backupper both personally and professionally and have NEVER seen the fragmentation issue before, or had any issue at all for that matter with a cloned drive.
View 1 Replies
Similar Messages:
Dec 13, 2015
I cloned my hard drive a Seagate 2T to a WD 2T using acronics software.I removed my Seagate drive and plugged in my WD drive in the same spot and system would not boot tried using windows 10 repair disk no luck plugged the Seagate drive back in booted???
View 4 Replies
Nov 15, 2015
I am using Windows 10. And I just received November Update yesterday.
My new Samsung 250 GB SSD is on the way , and I don't want to install a fresh install. With my 1Mbps (128KBps) internet it will take more than a day to complete.
My HDD is 500 GB , but C drive is only 50 GB.
I want to close only the C drive into SSD and make it a 200GB+ partition (or less but more than 50 GB). I will be using HDD for media storage and SDD for OS and Apps.
View 1 Replies
Sep 8, 2015
I've got a new computer and I want to clone my old OS(windows 10) from my old hardrive to my new hardrive. I've read that it doesn't always work! Is this true? And is there any other ways round it?
View 1 Replies
Nov 13, 2015
How do you clone a Hard drive with EaseUS? Or any other software! Do you just scan hard drive for files Etc. and export the results on to your external hard drive.
View 1 Replies
Jan 27, 2016
In my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect
Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition
Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
View 3 Replies
Feb 2, 2016
When I try to boot from a recovery flash drive, it fails with: EFIMicrosoftBootBCD error status: 0xc000000f and message: The Boot Configuration Data for your PC is missing or contains errors.
The recovery flash drive was created on a Lenovo ideapad originally with Windows 8, now upgraded to Windows 10, latest upgrades applied. Checked the box for copying system files. Target drive was a 16GB DataTraveler flash drive formatted as FAT32. Creation ran to completion with no errors. When booting normally, Windows 10 runs fine with no issues. I tried re-creating the recovery drive with the same results.
I created a repair disk and tried to use bootrec to fix the issue, but I suspect it did nothing or fixed the c: drive. I ran boot rec while in the root directory on the flash drive.
View 3 Replies
Dec 19, 2015
I have a legacy 64 bit dual core desktop (ASUS mobo). I have several Sata hard drives in it with the 4th partition of my 1 Terabyte drive containing my Windows 10 Professional boot OS. After converting another similar legacy machine to a NAS device I took the old Windows 10 32 bit OS drive from it and tried booting the ASUS machine with it. Needless to say, the OS didn't like it and reverted to Windows 10 Pro Insider Preview edition (build 11082).
When I tried to restore the boot drive to the original one for this machine the master boot was missing.
I had just formatted another partition on the same drive that had contained a Windows7 installation that had failed. This partition may have contained the master boot record. So I booted to a command prompt from a USB drive and successfully ran the following commands:
bootrec /RebuildBcdbootrec /fixMbr bootrec /fixboot bootsect /nt60 SYSbootsect /nt60 all
After that the BIOS just says "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system" This disk and OS are on the original machine it used to run on. As I understand it, Windows 10 tries to record it's key to somewhere in the BIOS. But the BIOS on these old machines don't provide such a facility. I don't understand what Windows 10 OS does with the key in this instance. If it was recorded in the BIOS then I'd presume that the other Windows 10 drive I attempted to use would have found it and used it. Or perhaps not, since it didn't like the new environment.
what I'm looking for is a way to get my original Windows 10 to boot again on the same machine it had always work on before, from the 4th partition of the 1 terabyte drive I'm using.
View 7 Replies
Feb 10, 2016
I wasn't sure which forum to put this into. I created a backup image on a usb hard drive. I wanted to be able to restore it using a usb recovery thumb drive. I used the create usb recovery tool and created the recovery flash drive. When I try to boot from the flash drive I get an error saying that the boot configuration data is missing or contains errors. I can boot up the laptop using the current windows install so it isn't referring to the hard drive. I have tried several usb drives and get the same message on each. Here is a screenshot of the message.
View 9 Replies
Oct 18, 2015
My laptop doesn't boot because OS is on E: drive instead of C: drive
When I try to boot it up (it somehow boots up as windows 8.1 instead of my OS windows 10), it gives a BSoD and shows the error code 0xc000021a. I created a bootable USB drive with windows 10 pro on it, but it shows my OS as windows 8.1 instead of 10, and it doesn't allow me to restore or do a startup repair, because they both fail.
Booting up:
Repair shows windows 8.1 instead of 10:
View 9 Replies
Aug 28, 2015
I have 20 laptops with Windows 8.1, i upgrade all to Windows 10.
I add to one PC all softwares, tweaks and config Userprofile.
Can i clone (with Acronis True Image 2016) ; this one PC to 19 others, and have a valid activation?
View 9 Replies
Mar 27, 2016
I would like to know if i could clone my ssd (m.2) with windows 10, all my files to my storage HDD.i just feel like having it on both my drives just in case something happens to either one.i have it backed up on a usb drive as well,but i just would like it on both.do i have to purchase a program like acronis? is there another way to do it? do you think i should really be worried about this? is it a good idea to have the same operating system on two drives in the same computer?
View 1 Replies
Dec 20, 2015
I have an existing Windows 10 computer with corrupt W10 image that Microsoft says I need to totally reinstall. I also have a new SSD waiting to be installed. Due to corruption I do not want to clone. W10 USB has been created with Media creation tool. The questions - Do I need to format the SSD before W10 install? If so, how? Do I need to partition the SSD? If so how and with how many partitions of what size? I assume then I can unplug the HDD, plug in the SSD, boot from the USB, and it would install W10 onto the SSD.
View 1 Replies
Oct 30, 2015
laptop has Win 10 that was an free upgrade from Windows 7. If I clone to SSD will activation remain? I know if hardware changes will be an issue. I will backup key just in case, not sure it is needed. later hopefully a fresh install.
I have used Easeus and Acronis in the past with Windows 7, always with bootable media to do the clone. first time cloning windows 10, was thinking about Macrium, just never tried it. Put the new SSD in place and boot to the HDD as external?
View 3 Replies
Oct 22, 2015
My previous laptop running windows 10 finally gave up the ghost and died on me. Not a hard drive issue but power problems (in trying to fix it I broke some of the solder joints), any way it was 5 years old and was due to be replaced, however the hard drive was absolutely fine. So I bought a new laptop with a shiny new 1tb hard drive with windows 10 pre-installed.
So having used Macrium before (when I installed a 256gb SSD) I decided to leave the new laptop as a clean install and reinstall any programs that I still needed. Guess what, it seems that there was an awful lot of stuff that I had accumulated that I just didn't need any more. After copying some documents over for work and installing a couple of essentials total space used including OS is less than 75gb.
View 9 Replies
Jan 11, 2016
Does Macrium or other common/good backup/clone package can take an existing good bootable SD Card and clone it to a fresh one? do they need to be exact matches [brand/speed/size] or near-proxy?
View 9 Replies
Sep 17, 2015
I've installed a new 500 GB Samsung SSD 850 EVO in my system. I want to clone only the "used" portion of my 2TB HDD (about 370 GB) to the SSD for faster performance when I boot, run programs, etc.
I'm a bit of a noob, and when I go into "Disk Management" one option is to shrink the largest volume on my HDD. I'm thinking that if I shrink it down to about 370 GB from the current 1.8 TB maybe then I can go ahead and clone using, say, Macrium Reflect. Once the cloning is done, I want to boot from the SSD, back it up, and then wipe the HDD and use it as a mass storage disk.
FYI, the HDD is encrypted by Bitlocker.
Is it as simple as that? What issues do I need to watch out for?
View 9 Replies
Aug 1, 2015
Received a MSI laptop with pre-installed W8.1. Planning to install a new SSD on m.2 slot. I have several options to update to W10.
p.s: I am keeping both SSD and HDD in my laptop
1) Clone from old HDD to new SSD using MSI burn recovery. Then update to W10
2) Upgrade to W10 on my old HDD. Get W10 activated. Perform a clean install on SSD. Lastly, format my old HDD as secondary drive
View 1 Replies
Dec 6, 2015
I had Windows 10 configured to auto log on with only a single user account and haven't had a single issue until last night after a restart to apply updates. Now when I boot my PC I am stopped at the login screen stating my password is invalid. The reason it's invalid is I now have two accounts with my name assigned however the one it tries to log into by default is the newly created one (it looks like it simply duplicated my original) and it doesn't allow any access to Windows. I select my original and log in manually just fine.
The problem is there is only one User listed in the User Accounts settings and that account only appears on initial boot as I can log out to the login screen post boot and the account has disappeared.
View 9 Replies
Nov 9, 2015
If I clone a disc with Acronis true home image . Does it just copy programmas and apps I have installed? This would save me a lot of time if this is true. For example if I have Windows 10 Home installed when I backed it up and installed pro, would it keep my windows 10 professional licence and Office Etc. On to my new install.
View 4 Replies
Nov 6, 2015
After cloning a new ssd the new drive won't boot. The bios recognizes it but the only way to get the machine to boot is to connect the old drive. I'm guessing I'll need to try to clone again or maybe install from the back up?
View 6 Replies
Oct 31, 2015
I was trying to boot from the Installation Media with the intent to restore using a system image disk. I have mounted the disk previously and determined that it in fact has the image intact. However it is not recognized. So, I tried to install Windows 10 Home with the Installation Media but there is no partition there and the error says "the drive is locked". I am now typing this on the same pc so obviously there is no problem with the drive.
View 9 Replies
Sep 17, 2015
Since I did clean install of Win 10 I find it will not allow me to boot to internal cd drive or USB drive. I know this is an attempt to secure the OS or lock you out of competing OS like linux or both but I can find no way around this. My bios has not been updated to the secure boot version on purpose but the OS still intercepts any attemp to boot to any device other than drive with OS on it.
My boot sequence is CD first but it is ignored on boot. Also if I go to boot device selection and select CD drive it still boots to win 10. I have tried win 10 setup but there is no option that i have found that allows me to do what I want with my own machine. I am a developer and routinely boot to cd and this behavior is unacceptable. I would like to use win 10 but have gone back to Win 7 until I can find out how to defeat this.
View 9 Replies
Dec 30, 2015
I am currently running on windows 7 home premium and is planning to upgrade motherboard soon. I know that it is possible for me to create a USB boot drive with Windows 10 on it for a new computer. But I don't know if Windows 7 will interfere with Windows 10. I only have 1 hard drive in my system
View 1 Replies
Sep 1, 2015
I have an HP Envy Desktop that boots off the HDD when I bought it, but loads to my PCIe SSD cuz that is where I have windows 10. How do I get it to boot directly on my PCIe SSD? It's an OCZ R4 CM88 1,6TB SSD. The BIOS are set to boot from SSD first, but it continues to boot from HDD as I see the HP logo every time no matter what boot order I select. I tried EasyBCD 2.2 and that didn't work...
View 1 Replies
Oct 20, 2015
So, i am going back to Windows 7 so i have my disc and key. But how to start my computer from the CD drive with windows 10. With Windows 7, there was a key(like F2 or F12) to change boot device. that is not there with Windows 10. So how do i boot my computer from the CD Drive?
View 13 Replies
