I got a new laptop with Windows 10 about a month ago. Used it several times over the last month, even yesterday. But this morning when I tried to use it, it will not let me enter my password. I can move the mouse, but that's all. I can't get to any other screens.
Some might say, Windows 10 home can be frustrating. Ok!, When my desktop goes to sleep, I have to enter my password on wakeup. I've searched all over the internet...and that includes www.tenforurs.com and printed out some thirty pages on how it can be done, but, no luck.
I have printed how to Make Windows 10 not require a Password on Wake. I went to Power Options in Control Panel, click the "Require a password on wakeup" on the left-hand side. Clicked on... "Change settings that are currently unavailable" link, then click the "Don't require a password " button, and made I saved it.
After the computer goes to sleep and I need to wake it up, it asks for my password. I've tried this at least dozen times in many different way according to some that post how to do it.
Windows 10 was forcing me to enter a password every time the computer booted up. I ran netplwiz, unchecked the box that said password was required, entered my password twice, then I shut down the computer (not just a restart, a complete shutdown). When I turned it back on it didn't ask for a password. But then after it was idle for awhile, when I woke it up it wanted a password again. How do I get rid of that?
I just upgraded my laptop from windows 7 to windows 10. Before I upgraded, my brother created an account for himself and windows 10 seems to think that his account was the main one. He didn't have administrator access, so now I'm locked out of everything that requires administrator access.
When I try to install new software, the security pop up happens, asking for an administrator password, but there is no field to enter a password.
I can't open the command prompt (windows -> cmd -> enter)
I can't switch accounts, logging out lists no other accounts.
How do I get administrator access back, and how can I make windows stop thinking I'm my brother?
I just reinstalled Win10. Before doing so I could go directly to my password screen, without the previous window due to a tweak, and when I keyed in my password it would open automatically without having to press the "Enter" key. Now I must do so. My search has only found how to not have the first screen mentioned above but not the password part.
I (think) successfully updated to Win10. But, when I went to start up I can't get past the hi there screen. The password box will not populate when I key in my password. I do not see an arrow or any indication that my mouse is working. Tried rebooting with keyboard disconnected then reconnected and no go.
Husband updated his laptop to Windows 10 several months ago. So far it's been good, and he likes it...that is until this morning. He opens the laptop...no internet connection. It shows our wifi network, but won't connect. He enters his password...says he needs to enter password for that device. Enter password from before Windows 10...no good. Enter password for micorstoft...no good.
Using my laptop (Windows 7) to find fix. I've tried: Troublshoot network connection by right clicking. Right Click won't work...nothing happens. Maybe keyboard language is wrong...no settings button available to look at keyboard properties. Try connecting directly to router...won't make connection. We've rebooted the computer a couple of times, to no avail.
Our phones are connected, my laptop is connected, our chromecast is connected, so we know it's not the router. There is something up with his laptop.
Playing ring around the rosey is not the best way to spend a Sunday morning. no internet connection = no ability to enter password = not able to troubleshoot internet connection = no internet connection = no ability to enter password.
I just upgraded a new laptop to Windows 10 with the latest build. Everything was great until I rebooted after uninstalling some bloatware and now I can't get back into Windows. The login screen comes up and the only user account (admin) is listed, but there is no where to enter the password. This has be baffled.
I've been trying to get into safe mode, but the HP Envy 15 that I'm using doesn't seem to want to let me do that.
I have my laptop at work and have had no trouble connecting the company WiFi (they have Guest WiFi and a WiFi where you need to enter your company provided Username and Password). I have been connecting using my Username and password. Today I had to change my company login password. Now when I try to connect my laptop I get a "can't connect" message because the password saved in my laptop is no longer valid. But I can't find a place in Win10 to enter my new password.
I remember the first time I logged onto the company WiFi a Windows popup came up asking for my Username and Password (which was saved so I didn't need to enter it again - until now). This time not getting the popup - it just says "can't connect".
Ok so i am furious with Micro$oft now! the other day i was FORCED to change my microsoft account after much nagging i did so and i dont like changing logins too much. (this was a week ago)
now for some random reason on earth without my permission my windows login also changed login passwords to the microsoft account. I DONT WANT THAT! that password is too long and complicated for someone who locks his computer every 5 minutes or so. why did this just kick in now? i changed M$ account pass over a week ago and today it decides to change windows login?! can i change JUST my local windows login separate from microsoft login?
if i try to change pass from settings it it goes online and says you cant use password that has been used before.
after an update at starting, tablet laptop start gives picture/clock screen, that slides to the password screen but when password block is touched on screen or mouse clicked the screen flips back to the picture/clock ... how to deal with this kind of lock out that the typing box won't open and loops to clock screen? have turned off for an hour to see if that does it..but if not...would restarting into a repair or recovery be possible fix...i have never been able to get into safe mode without being logged in but have gotten into recovery during a restart which made me wonder if entering a recovery during boot and reversing the upgrade was possible if all else fails...
I have entered BIOS many times but now I can not. Previously, tapping the delete key or F2 on start up would open BIOS. Now it will not I have tried many times. I have tried from restart as well as from shut down. I wish to change the boot order but am stymied.
how it did not work on windows 10 using f8 key..I like knowing if I need to get into safe mode on my pc the f8 key will work... So I started checking the web and found how to make windows 10 go into safe mode with f8 key...The information I found is for windows 8 but I checked it out on my windows 10 pc and it works just fine... How to enable the F8 key to start Safe Mode in Windows 8.Admin...If this is information you all know about just delete this post...
Windows 10 is simply not able to enter sleep mode. Whenever I try, the monitor shuts off, but the computer power does not. When I move the mouse, the log-in screen appears (as it would when your computer comes out of sleep).I looked at Windows Event Viewer, and this is what I found for my attempt to sleep just a moment ago (Event 10016, DistributedCOM):"The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID {D63B10C5-BB46-4990-A94F-E40B9D520160} and APPID {9CA88EE3-ACB7-47C8-AFC4-AB70 2511 C276} to the user NT AUTHORITYSYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool."
I went to these IDs in regedit, and attempted to change their security permissions. I received an error message saying "Unable to save permission changes on {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}" (or the CLSID).Looking at the above CLSID registry entry more closely, I find that it corresponds to a program called RunTimeBroker.exe. The official Windows website has instructions on how to change the permissions for this program, namely, by opening Component services, going to RunTimeBroker, opening its Properties, and adjusting its Access Permissions in the Security tab.
I just downloaded my 2015 1040a form, clicked on the icon and the page appeared on my computer screen. However, I'm unable to enter any text. When I click on a box there is a arrow...no cursor. What is causing this to happen?
Just updated to the latest build. Windows 10 build 10547. It makes it to the lock screen, and I can slide the picture up, but it won't let me put my PIN in. I can't click any icons in the bottom right corner, and when I do click, the picture is just above my cursor like I am sliding it up again.
My computer is too slow to enter hibernate in Windows 10, it works fine in Win 8.1.
When my PC enter hibernate, the screen turns black quickly, but I see that PC writing to the hiberfil.sys take 2-3 minutes, it's too long, in 8.1 it just takes a few seconds.
EDIT: Tried to disable and enable hibernate, and increase size of hiberfil.sys, and it seem to be faster, about 1 min, but it is still slow compared to 8.1.
I don't know if this is just me and my keyboard or if something happened with an update. Normally to open most apps I will just press the windows key on my keyboard and type its name. I updated today, both normal windows updates and the threshold 2 update (build 10586.3), but I think the issue started happening after the normal updates. Anyways, I used to be able to type my program name and press Enter and it would open.
This is no longer the case for certain items. For example, if I type Regedit, it correctly find the Regedit app but if I press Enter nothing happens, but I can click the found entry with my mouse and it opens just fine. I also cannot open a UNC path (ex COMPUTERC$ or C:Users) using the Enter button, but again the mouse works. It seems that if after finding the program it says "Run command" underneath it it doesn't open with Enter, and again neither do paths. I can type Notepad and press Enter and it opens just fine without any issues.
I have clean installed windows 10 on my Zenbook (UX31LA) and i have problem with the sleep mode, when i enter sleep mode (either way) my screen turns off and the power led blinks (normal so far), but when i wake the computer up, I see the "Asus" logo and it loads the sign in screen and all my work is gone. it looks like it stats from scratch and it takes about 8 sec (like stat from power off).
I've trying to update an Advent netbook to windows 10 from 7. It's been a hassle all the way with hangs on 'checking for updates'. However, I got through that but now it's stuck on 'Get going fast' screen.
I had selected 'use express settings' and now it's stuck on that screen. The mouse still works but nothing happens. I left it on all night. It's still on the 'get going fast' screen.
If I reboot (even remove battery) I get the initial advent boot screen but no bios info. Del, f12, f11, f2 etc do nothing. The blue 'win 10' logo appears briefly then back to the 'get going fast' screen.
I also tried the usb flash drive that had the old os on it but it won't boot from it despite that being the initial boot setting in the bios. Has win 10 bricked my netbook?