Can't Get To Proper Window To Type In Product Key For Activation
Sep 6, 2015
So I installed Windows 10 via media creation tool on my newly built desktop PC but its stating my windows key is from what I'm assuming the laptop I made it from ( GF's laptop). I bought a key for windows 10 but I can't get to any screen that allows me to type it in. When I go to System> Activate I get a notification sound like a window popped up and needs me to click something but I can't see anything nor is a window present. From there the whole settings window freezes up and forces me to end it. Is there any way to remedy this without reinstalling all my programs?
I am trying to upgrade GENUINE Windows 8.1 PRO x64 to Windows 10 Pro x64 from the ISO I made from the Microsoft RTM files. I am upgrading from within the 8.1 OS and choosing the option to keep "nothing" of my settings and personal files.
I have two problems.
The first is that the installation asks for a product key. On the other hand, when I upgraded my Windows 7 machine to 10 from within the OS it didn't ask for a product key. Why do I need to provide the product key to upgrade my 8.1 system, but not my 7 system?
Second problem is that I can not upgrade from 8.1 PRO to Win10 PRO. When I put in the general product key for the Win10 HOME edition the install proceeds, but it does not take the other (different) product key corresponding to the Win10 PRO version, even though it should. Why can't I go 8.1 PRO -> 10 PRO?
We just updated our laptop to windows 10. The browsers edge/chrome/firefox hang up when tried to type in address bar or search window. mouse click works, but try typing and the browsers freeze, In Internet explorer typing in address bar works but cannot type in search box like google or any email login page like gmail, yahoo. Update went fine. Our PC does not have touch screen
yesterday I opened Windows 7 iso file in my Windows 10 operating system, and pressed 'Install now', I immediatly cancel the operation, and a new partition showed up next to C: drive, I knew nothing about system partition yesterday and I though Windows 7 installation reserved it, so I erased the 2 folders that had inside (EFI and Boot). But the partition still existed, so I restarted the PC and now shows: "Reboot and select proper boot device" (Windows 10 no longer boots).
I tried to fix it with Windows 10 USB iso's troubleshoot and everything failed, so I tried using the Command prompt tool but couldn't do much with it.
I try and go into the bios to change the order of the boot devices but my keyboard start to turn on with flashing leds like normal then just turns off.
When turning on my computer today, I had to face a BSOD with the error name being "System Thread Exception not Handled", which prevented me from launching Windows 10 in either way. So I rebooted my computer on my Linux Mint partition in order to look on the internet the solution to this error. I then created a USB bootable with Windows 10, so I can access to the troubleshoot kits. However, when I launched my computer again on my USB key, I found myself in front of a black screen with words saying "Reboot and select proper boot device".
Things get quite weird from now, because when I try to boot from my SSD where Windows 10 is installed, I no more have the previous BSOD, but always and always this black screen with the same message. I do not know how to do now in order to access to Windows 10 again.
Unfortunately, being unable to access to Windows 10, I can't give you a DM Log Collector.
Whenever I shut down my computer, I always have this problem. The Windows 10 insignia and the loading circle beneath will appear, then the screen will fade to black, and then my monitor says it can't detect my computer. I then have to unplug my computer from the outlet because I can't shut it down by pressing the power button. When I start it up again afterwards, it will start perfectly fine. And whenever I try to change the boot configurations, it automatically resets itself to the previous version.
Downloaded Windows 10 and started installing it. The install got to around 20% and now I'm stuck on a black screen with "Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key". I have gone into BIOS and changed boot order around but it doesn't seem to make any difference.
I am getting that error at splash screen after failed dual boot install of Debian. It was on the same drive, but I do not have another PC to get a boot repair or any other tool. I could go to a friend as last resort. Tried setting bios, still doesn't work.
My custom-built pc all of a sudden won't boot in to windows. i get the error message "reboot and select proper boot device or insert boot media in selected boot device and press a key", and i have made sure that my hdd is my first boot option. i want to reinstall windows now because that seems like the only way out, but i cant because i have no recovery usb or disc. what can i do to boot to this harddrive, that my bios detects just fine.
Last, previously closed window outline remains displayed. Sometimes can 'force' it to go away by left clicking on an unused portion of desktop but not always.
Just got laptop for Christmas and has always had this problem so might be a setting.
Have looked at Advanced -> Visual Settings but didn't see any that looked like would fix (tried setting Best Performance - which turned everything off but didn't fix)
Instead of upgrading directly from the media creation tool, I decided to make ISO so that i can upgrade my friends PC's too as I did while I upgraded from 8.1 to 10, But this time it dint go well.Though I was successful in creating the ISO, when i mounted ISO and ran the setup, its asking for me the product key, I entered my current windows 10(Genuine) product key but it dint work, i also tried my old windows 8.1 key that too dint work. But last time whenI was upgrading too windows 10 using the same method it dint ask for the key. And my laptop is dell inspiron 15r with genuine windows.
After installing a 32 bit windows 10 from a USB by mistake I decided to upgrade to the 64 bit version. I have 3 hard drives, one of which is an ssd that I am trying to install the OS to. After downloading and setting up the media creation tool and creating a USB I restarted and boot form USB.
I followed the steps and deleted the existing windows 10 partitions on my dad and tried installing straight to the unallocated space. After the installation completed it restarted the installer, which is not what happened when I previously successfully install windows 10. I then changed the boit order to have my ssd first and rebooted, which gave me the Reboot and select proper boot device or insert boot media error.
Confused I loaded up the installed and there were correctly partitioned installs already on the ssd ( although one partition looked a little small). I tried reinstalling windows 10 with the same result over and over.
My PC was running 8.1 French version converted to English version (Reseller screwed up).In practice a lot of the stuff was displayed sometimes in Eng sometimes in French. I have the 8.1 French CD.So instead of doing the upgrade which I thought would result in another mishmash of languages, I did a clean install of 10 Home Eng via USB key downloaded install media.Apart from a few video probs (BSOD) blinking cursor, all went well.I cannot use 8.1 product key to activate. Looks like I may have to buy new product key for W10.
According to my computer, Windows7 is activated and is a genuine product. But when I attempt to download W10, it does not recognize the 25 digit Product Key. I don't know what to do.
I have a new computer with windows 10, at the first boot the computer did some things to prepare itself for use, but then I was asked to give my credenitals to account, I used my windows account, but there was some error and I had to reboot. Since then this is what happens: when I boot up there is (probably, cause English is not my native language)
Then I choose my language and click next, after that it asks for a product key, after I confirm that (or skip) and use express settings it goes into "just a moment" than the computer reboot and I am at the begining again.
I have just restored a saved version of a VM Windows 10 upgraded from Windows 7. It had a digital entitlement but the restored machine required activation. I chose what I thought was the Product Key of the Win 7 machine prior to the upgrade but it was rejected. I now realise that I may have used the wrong key but it raises a question.
How can you tell what Product Key you have used to activate an installation of Win10 which shows as activated?
I recently upgraded to windows 10, and decided to do a clean install. So I made a image of my system (when it was windows 8.1), wiped my Hard drive (which still had the original windows 8 install,), and stuck a ios file on a usb stick. However during the install to my SSD (Which is different from my hardrive) the computer asked for a product code, something I do not have, and did not think I needed (my understanding was that windows 10 registered your hardware). If I skip it, it goes though the prossess of installing, but then restarts after finishing moving the files. I dont want to have to attempt to go though the effort of putting windows 8 back on the laptop, moving it over to the ssd, upgrading to windows 10, getting a product key that may or may not work, and trying it again.
How I can retrieve my windows product key from my BIOS? This for a 2 month old MSI Dominator GT72 PRO laptop which was purchased new with Windows 8.1 preloaded; no disc or product key label was provided. We recently did the free upgrade to Windows 10 and through a series of issues ended up letting the OS do a reset which did not work out.
Microsoft provided us a link to download Windows 10 for a clean install, which we did and is now on the laptop, however, it requires the original 8.1 product key to complete the installation. Microsoft tells me that the original product key should be retrievable from the BIOS since it was not provided with the laptop. What is the procedure to locate the key from the BIOS?
As I have multiple retail license keys, I am unsure which one is in use right now.
There are 3rd party key finders that may show the key in use, but I prefer to obtain the key using Windows own tools, if possible. For instance using a CMD.(Am uncertain about these 'key finders': can they be trusted?)
apparently the key on the label is the OEM key the manufacturer is obliged to give with an OEM product.
the ' embedded' key found with magicaljellybean is the volume licensing key that the manufacturer uses to bulk activate multiple PC's not strictly a Windows 10 issue.
I did a product key search using jellybean on a Windows 7 PC I am about to upgrade to Windows 10. however the product key I obtained vqb3x .....etc is different from the product key on the sticker on the side of the PC.. .MMVJM....etc