I cant change my resolution at all and I've gone to the geforce site to update my driver and it keeps failing to install it? These are my current specs:
Operating System Windows 10 Pro 64-bit
CPU AMD FX-410033 C Zambezi 32nm Technology
RAM 8.00GB Dual-Channel DDR3 @ 668MHz (9-9-9-24)
Motherboard ASUSTeK Computer INC. M5A78L-M LX (AM3R2)25 C
Graphics Generic Non-PnP Monitor (1280x1024@64Hz) / NVIDIA GeForce GTX 460 (PNY)
Storage 931GB Seagate ST31000524AS ATA Device (SATA)25 C
Optical Drives TSSTcorp CDDVDW SH-222BB ATA Device
Audio Realtek High Definition Audio
i would want to know if i should upgrade to win 10 since only drivers that support win 10 are amds 15.7 drivers and i dont plan on upgrading my monitor.
So on my dell xps 13 that I just put windows 10 on, I'm looking for a way to have the icons rescale to the correct size when changing displays without signing out? For example, I'll have it plugged into my monitor, then unplug the laptop to use it, and when the laptop screen turn's back on everything on the desktop is supper small. A sign out and in fixes this, but that's less then ideal.
I have 2 monitors plugged on my desktop PC running widows 10 pro. I'm facing a technical issue with one of them but cannot replace it for now. The problem on that monitor is that it turns off and on by itself randomly. Each time it happens, the resolution on the monitor that doesn't have this problem changes. This is very annoying of course. How to prevent this?
We installed windows 10 on our desk top computer from direct download. once everything was completed. The resolution on monitor is stuck on 800x600 and the desktop is compacted in the middle of the screen. The monitor is 19 or 20 inches, but nevertheless the desktop is about an inch and half smaller on each end of monitor. We were able to change through settings icon size, but still left with compacted screen.
Got a nice light small laptop(screen 14 inch - enough for travelling) which has a native resolution of 1080 X 1920 --much better than the usual 768 X 1366 - especially when viewing movies etc. The display is really a significant improvement over the bog standard 768 X 1366 and really noticeable also when typing word documents or reading text.
(For traveling etc the 14 inch size is far more convenient than the more usual 16 - 17 inch sizes).
However the windows standard texts are tiny (boxes, drop down menus etc etc). -- I fixed most of it by adjusting text size settings and display to 150% -- the start menu items still have too small text.
If I increase the display resolution to 175% things like file explorer fail to start when clicked and the screen refreshes periodically - so set back to 150%.
Any way to increase text size on the Start menu.
Funnily enough when you use the WIN+X key / right mouse click on start button the text sizes in that list are fine --it's just the standard start menu when you click the windows start button.
Running Windows 10 pro X-64 -- graphics driver Intel HD 520 latest version. W10 latest updates applied.
Preparing upgrade to 10 Did clean install Window 7 to customize, sysprep, image, install on several duplicate PCs prior to upgrade 1st drive is SSD, 2nd is HDD SSD partition c: os and d: virtual box HDD e: data
wrote answer file move user and program data from c: to e:
Something happened post sysprep and partition letters switched d and e, I changed the drive letters in windows and now can't get into profile There is a shortcut to e on the d partition of SSD Tried reassigning letters using diskpart but they don't remain when entering windows but go back to the wrong assignment.
I googled this and apparently it happens but I don't know why. I can only think that I was lucky to image the clean OS however if I can fix this it would save me time. If not, I will get rid of the d: partition and put that post sysprep
A new touchpad driver keeps installing, which then causes the touchpad to stop working until I plug in an external mouse and roll back the driver!Is there a way to block/ not install a certain update?
For some reason, the Intel HD Graphics driver which is included in Win10 for my notebook crashes continuously.I downloaded the driver from the intel site and that one works perfectly fine.
Problem is, Win10 updates this driver (all the time) to the one from Windows update ... and then the driver starts crashing again.
I did already set the 'Device Installation Setitings' for manufacturers apps (in advanced system settings) to No, but that doesn't work.
The only thing that works is setting the WLAN to metered connection, but that prevents all updates.
how I can have Win10Pro stop updating this driver? (Win10 Pro)
I upgraded to 10 again without doing anything I usually do before hand. I went to disable the option to not let windows update install drivers and theres no option. I went to advanced system settings, hardware, then device installation settings and theres only 2 options, yes (recommended) and no (your device might not work as expected)
How do I remove the dialog box telling me to update drivers ? I have automated updates from HP so I do not require a new program that wants to install on my computer. I'm confused as to whether it's from MicroSoft or some scam.
IF needed .... How to temporarily prevent a Windows or driver update from reinstalling in Windows 10
'Symptoms: In Windows 10, your device is always kept up to date with the latest features and fixes. Updates and drivers are installed automatically, with no need to select which updates are needed or not needed. In rare cases, a specific driver or update might temporarily cause issues with your device, and in this case you will need a way to prevent the problematic driver or update from reinstalling automatically the next time Windows Updates are installed.'
I've just updated windows 10 and it uninstalled the latest version of the NVidia driver that I had installed two days ago. Is it supposed to be like that?
General decrease in PC performance. So yesterday I updated my NVIDIA drivers from GeForce Experience (driver version 355.60) and ever since that my PC's performance has dropped considerably. Things are generally slower, but it is most most noticeable in games.
before the driver update I would get solid 60+ FPS in Battlefield 4 at Ultra settings, but now the average is 30-40 FPS on medium settings. Same situation for all my other games. I have tried uninstalling the driver and reinstalling it, and installing an older driver to no avail.
I just updated my laptop to Windows 10 and I'm having an issue with the driver for my fingerprint reader. Windows 10 keeps installing the latest driver software for it rather then the version that I manually installed. The problem with the newest driver is that it disables finger print sign in and windows hello. I had the same issue in Windows 8 but I was able to just go into Windows Update and disable the update, with Windows 10 I can't do that.
Windows 10 keeps installing the ASUS Smart Gesture touchpad driver on my laptop. The driver is garbage and it runs three memory resident processes, which seems rather excessive for a touchpad driver. The default Windows touchpad driver works perfectly well, so I want to use that instead of the ASUS driver. However, if I uninstall the ASUS driver Windows Update quickly reinstalls it.
I disabled automatic driver installation when I installed Windows 10, as you can see here:
Despite that Windows update keeps installing the ASUS Smart Gesture driver.
I am attempting to hide the driver update for my NVIDIA Grapgics card as the one from Microsoft causes me problems.
I am using this program from this link: [URL]
It doesn't matter how many times I run it the Driver update will not hide and therefore I am unable to update my computer without installing this troublesome update.
Been reading here and using win 10 from the outset. On latest build, updated this morning. This Elan touchpad driver keeps coming in through windows update and it just screws up my touchpad more than anything. When it loads up I can no longer use right or left click functions on the touchpad. I can find no way to stop the update.
Is there any method for stopping a particular windows update from loading? I keep uninstalling it but it comes back all the time. I am on an Asus G750J laptop.
Windows 10 Pro and I am having an issue with my Touchpad driver, it seems to want to mess up and not move to where I need it to go, so I uninstalled it from the Programs and Features menu, but my issue is it keeps popping back up in Windows Update and installing on its own, I don't want the driver for it as it doesn't function correctly with it installed it works great when its not installed so how can I hide it
I checked my available updates this morning to find that Windows 10 has downloaded and wants to install the "latest" video driver for my Radeon 7700.
I have used AMD Auto Detect and it tells me I have the latest driver (15.7.1)
I have used the instructions on this web site to disable automatic driver updates.
what is this driver? I have read before that Microsoft sometimes tries to download and install drivers that have already been installed or are already up-to-date.
I have a SteelSeries Sensei mouse and a Razer BlackWidow keyboard. Windows 10 daily attempts to install a "SteelSeries ApS - Keyboard - SteelSeries Sensei [RAW]" update. The update fails within seconds of starting with error 0x80240016. The initial failure message darkens my screen (even when another program is full-screened) and shows a simple message, I don't currently have the verbiage and can't reproduce until Windows attempts automatically.
The update says keyboard in the name, but also says my mouse model. I'm sure it probably pertains to my mouse, but my mouse is working fine and this update fails regardless.
I've rebooted. I've attempted to install while a different mouse was plugged in. I've tried updating mouse and keyboard drivers automatically through the Device Manager ("device driver is already up to date"). I've installed keyboard and mouse drivers from the vendor sites.
Is there anyway to get Windows 10 to forget about this update and stop trying to install it?
As I encounter problems with my Lan driver Realtek and Windows 10 Pro 64, somone on the forum said me to download the last version from Microsoft update catalog which seems the good one.
So I downloaded the driver but it is a .cab file. When I unpacked the files I obtain four files : a .cat file, a .inf file, a .sys file and a .DLL file. There is no setup.exe file....
I tried to install the driver using the command "HDWWIZ". It sees the .inf file but noting installs..
Recently I was notified that a driver installation failed. I went and checked it out, and it was a driver for HD 4600 graphics. My old system ran an i7-4790K, and when I upgraded to X99 I did not reimage my SSD.
Is there a way I can remove an update from Windows Update? The CPU I have has no iGPU, let alone HD 4600.