On 9/12/2015 I was able to log into my non-administrator (user) account. Today, 9/14/2015, I get the message: "Windows couldn't connect to the Group Policy Client service..." How can I fix this so I can log into my user account?
View 19 RepliesAlso searched this forum and have replied to similar posts - But here is a thread of my own.
I Setup a new PC for a friend on Saturday 28/11/15
Brand new desktop with Windows 10
Setup using a local Admin Account
2 days later - message appears on starting up (after the login prompt)
"Windows could not connect to the Group Policy Client service. This problem prevents standard users from logging on to the system."The the PC is slow to respond , would not open WLM or Chrome And takes 10mins to shutdown
Choose to hold the Shift Key and restart - Then Continue
Which fixes the issue - for a few reboots !!!!
Windows 10 has also updated to 1511 Threshold 2
Still occurs
I have tried - and with MS Chat assistance - and all have failed
1) New profile
2) SFC /Scannow
3) Clean Boot
I then read about and was also advised by MS of a registry change for grpsvc.I notice the issue is that Group Policy Client - does not have a status of "running".I checked a couple of windows 10 PCs and they all have the Status "running" although none had the registry entries recommended and all have worked fine for months.However, MS - updated and changed the registry and now we have the status of "running" next day it gave the message and problems returned This time I notice that the GPC status is blank again.Despite the registry changes - still having the issue - every day for 10days now with a reboot using the shift key fixes the issue and GPC is running again
I'm at a loss what to do next MS have said its not a windows problem and refused to further assist - and advised to go back to the OEM HP have said its a windows issue windows couldn't connect to group policy - Windows 10 Forums Which I may try and see if there is a space - but I have checked the registry now and it is now setup as the various GPC articles of course , if i do a clean factory reset - that will be removed
OS Windows 10 x64 Enterprise Build 10240 Kaspersky Internet Security
Failed to connect to a Windows Service.Windows Couldn't connect to the Group Policy Client Service.This Problem Prevents Standard users from signing in.As an administrative user you can review.The Group Policy Client does not start,when I start the Laptop after shutting it down remove the power supply for some minutes, I have followed the instructions from the net from this video link to check if the following keys exists in the registry
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesgpsvc
and
HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindows NTCurrentVersionSVCHOST
etsvcs
They both exists with the proper keys.Even windows 10 Inbuilt Mail, Google Chrome does not work.Other Browsers work properly.But if I restart the Laptop then everything starts to work properly.
I'm having the "Failed to connect to a Windows service. Windows couldn't connect to the Group Policy Client service. This problem prevents standard users from signing in" message in my laptop. It was updated from Windows 8 to 10 when we purchased it. At the beginning the laptop works well but now i'm having this message. I saw the a video and the GPC status is not running and in HKEY_LOCAL_MACHINE/SYSTEM/CURRENT CONTROL/SERVICES/GPSVC in the Image Path is netsvcs instead gpsvdGroup.
The problem is that when i went to SOFTWARE/MICROSOFT/WINDOWS NT/CURRENT VERSION/SVCHOST And then to the netsvcs I did'n t have to add it because it is already there, it was not missing. I verified Dword values and all of them have the same values as recommended in the video.
Not sure whether this is related to the recent upgrade (yesterday jan 28 2016), but I restarted my PC after after the upgrade, all was OK, I switched it off and went home. Today after I swithed my PC on the following appeared: "The Group Policy Client Service failed the sign-in. The universal unique identifier (UUID) type is not supported" Wow, this frightened me as hell. The logon screen reappeared and I managed to log-in on the second attempt.
View 3 RepliesWhen I turned on my Windows 10 Desktop PC this morning, it said it failed to connect to a Group Policy Service or something similar to that.
This is my Desktop PC. It's a Acer Aspire XC603G Desktop.
Since upgrading to Windows 10 a while back I receive the following message on start up:
Failed to connect to a Windows Service:
Windows couldn't connect to the Group Policy Client service. This problem prevents standard users from signing in.
Is this a major problem which I need to get rectified and if so how ?
I have windows 10 now and my computer takes forever to go on my homepage. It says 'windows couldn't connect to group policy client services. prevents standard users from signing in'. It also takes a long time to sign out and google chrome takes forever to come up. Windows edge sometimes works a little faster. I wish I never accepted windows 10. My daughter moved away to university and I'll never be able to figure out how to fix this. I tried to use the windows 10 app 'contact support' but it didn't work.
View 1 RepliesWhen I open group policy editor, began with build 10547 and is still happening with 10565.
If I click OK, it disappears, then pops up a second time, click OK again and it's gone, can do whatever editing I need to and the edits stick, so it does seem to have compromised the editor, just more of an annoyance .
I am trying to get hyper-v working but when I am trying to enable hyper v network switch on the network adapter im getting: ''blocked by group policy''. I upgraded windows 7 to window 10 yesterday and its my private computer.
View 1 RepliesThis notice appears each time the Group Policy editor is opened, and takes two clicks on OK to close. Simple steps to banish it?
Checked out this article, but was unable to rename the two files mentioned. I did delete them, however, and this removed the error message. What damage that did is ... to be discovered. ^_^ Files are in RECYCLE bin. [URL] ....
I have a gaming machine at home that was running W7. I upgraded to W10. It went from W7 Ultimate to W10 Pro, which is fine. Not long after that, I ran into some issues that I was unable to correct, sfc /scannow was failing, and I couldn't get DISM to read the source files correctly to execute a repair.Repair Install Windows 10 with an In-place Upgrade
This was successful, and I thought I was on my merry way. Then after I was using it for a few minutes, it came up with a message that I didn't have an AV running. So, it pointed me to the AV control panel, but everything was greyed out. Then I went into update, and got the notorious "Some system settings are managed by your organization."I'm quite sure this is a group policy issue, but I'm confused as to why it just decided to clamp down on group policy when this machine isn't in a domain (it's in a workgroup). I then found some instructions that said to delete the GP directories and do "gpupdate /force". That didn't work either.
I have windows 10 pro and I have edited the group policy for windows update and has set it to notify me to download. My problem is that after a few days windows automatically download updates and install them though I had set it to notify to download. It seems that the settings are not permanent and windows resets the group policy settings. How can i make the settings permanent?
View 2 RepliesDisabled windows mail app and calendar in the Group Policy settings snap in?
View 1 RepliesI've attempted to turn off my windows defender via group policy editing, however; following the guide here on the forums (how to turn off defender) there is simply no folder/tree with windows defender in the group policy editor.
I have w10 pro and am able to successfully start gpedit.msc.
Why its missing? I really dislike the regedit way of disabling/enabling; and thus wish to use gpedit...
I am using the Group Policy Editor to disable Windows Mail and Windows Calendar.However, both programs are still available. Is the GP Editor completely worthless?
View 1 RepliesI have 2 machines connected via a switch. They both have shared folders. They both run a piece of software. One machine acts as a master the other connects to it for data.
The issue is that the "Server" service is randomly stopping on the master and none of the shares work. The software on the second machine is crashing because it can't see the shares on the master. Windows explorer can't see the shares either.
Once this service has been started the software works fine. I have set the service recovery to restart on all failures but this hasn't resolved the issue. Why this stops or how to rectify the problem?
How do I get the NFS client on Windows 10 Pro?
View 2 RepliesHave set up a VPN server connection on my Windows 10 Pro desktop. Clients can connect to the VPN server but can't access the internet through the VPN connection.
I have the identical set up on a Windows 7 VPN server and client can connect through to the internet using that machine.
Everything seems identical in the set up, however the RAS Interface on the Win 10 shows "no internet access," where the Win 7 server does. This seems to be the issue, but can't figure out how to change the settings on the Windows 10 server to make this work...
I was recently reading this article on ShieldsUp [URL] .... about disabling the client for Microsoft networks.Are there any real security benefits for doing this and if so what would happen if I did? e.g. would I still be able to receive updates from Windows? I've already unchecked file and printer sharing and not bothered about any file sharing.
I'm using Win 10 btw ..
I cant find anything online what "WP sync client" is, but it is draining battery on my Venue 8 Pro. I have already tried to disable all tiles, and all background tasks. I dont have any phone sync app installed or anything. But still "powercfg sleepstudy" shows "WP sync client" as the main drain source.
View 1 RepliesCurrently I have installed Windows 10 Home on my PC. The issue is that the File uploading software Filezilla FTP Client is not uploading files in this Operating System. The Previous Version ( Window 7 ) has no issue with FTP. Now my question is that how can Filezilla will upload files in Windows 10...
View 3 RepliesI tried in MS mail and outlook to click on links and none of them go to any browser that I use, (Edge, FireFox or Chrome. The links are there the way they should show but no action when I click on them.
View 8 RepliesGet error message when I try to save a document or picture on c: 'A required privilege is not held by client.' Is there a way to fix this?
View 9 RepliesAfter upgrading from W8 to W10 and then doing clean install of W10 my Ethernet connection is randomly popping alerts and losing connection (event viewer reports this as event 1014), card also is randomly being reset.
troubleshooting just resets Ethernet card (Realtek PCIe GBE Family Controller) saying there was an issue with DNS.
I've never used Cisco VPN
Issue did not occurred on W8.1
Tried both drivers (Windows 10 update and Realtek for win8.1 using both compatibility and normal install)
Installed Win 10 on network client. I have 8 mapped drives from the server and on a regular basis 1 or more of drive are lost. They come back on their own usually a short time later. This causes major headaches when programs using files on the drives lose the connection while files are in use.
View 1 Replies