I was installing Linux as second os and split my drive in partitions.
After 2 hours (and installing linux) I can't extend my primary drive into the space thats left. I right click and "extend" button is grey. i want my 100gb back.
I'm going under Computer Management>Disk Management and have deleted a partition which gave me the unallocated 48gb, and I'm trying to add that unallocated space to the main drive (C), and it's not letting me, When I right the C drive there is only a shrink volume option, the extended volume is shaded gray.
I have windows 10, not 8. I'll attach a picture. Dropbox - issue.png
So my C: Drive has been acting up lately, with barely enough space to stay alive. I tried to take some space off the D: Drive, which has 240 GB of unused space, and add it to the C: Drive using Disk Management. But when I shrink the D: Drive and Right Click on C: Drive the Extend Volume button is Greyed Out! I think this is happening because the Free Space is not adjacent to the C: Drive.
View 6 RepliesWhen I first got my PC I installed RAID 5 across it. I stupidly gave Windows 30GB and the rest as storage. Big mistake I know. Now I have no room at all to update windows and cant figure out how to extend the size of the partition. I would prefer to make a fresh install and give windows around 100GB and keep the rest for storage.. How would I come around to do this without losing the storage contents
View 1 RepliesWhat I would like to do is to Connect Two Monitors to my Computer (which I have already done)
But how do I display different Content on each Monitor.
As an example, I would like one Monitor to display my email all the time while using the other Monitor for normal Surfing
Since upgrading to Windows 10 I have had to keep extending the primary partition, now up to 250Gb and full. I do have free capacity on another partition from which I have been taking spare capacity with any problems so far, but the partition tool won't let me take any more.
View 9 RepliesOkay, so I have a 3TB Seagate BUP BK External Harddrive, I recently partitioned it for some Ubuntu action. Problem is, I got rid of all the Ubuntu leftovers and now i'm not able to reunite the two parts on my HDD. However, I can do whatever the hell I want with the other two terabytes. I can partition, extend, and manipulate it however I want.
View 7 RepliesI cannot extend my c drive to take this unallocated space of 651MB? How do i do it?
View 9 RepliesI have received this message about not enough storage on my OC (C: ). So I searched and made changes to some of my files such as MyDocuments. I changed the location of it to my other disk (D: ). However, after a few days I get that message again so I have searched it up again and merging my extra space from other drive into OS(C: ). Perhaps looking at the image attached would explain my situation better than my English
My OC(C: ) Is only 119 GB and its almost full, yet I have plenty of storage in "Disk 2" as my "Data 2" File is empty.
Until recently, I ran a dual boot system with Ubuntu - but for business reasons, I uninstalled it (along with it's bootloader). Anyway, I cleared up the hard drive space in the Disk Management app on windows 10, I have about 350GB free space from Ubuntu and I cannot extend the C: partition, you can see what I mean here
I can't seem to extend my partition and whatever program I use I have to buy the full version to extend my partition,
After upgrading to Windows 10, the "extend displays" function is not functioning well on my PC (ASUS monitors; ATI Radeon HD 2400 PRO display adapter). I have tried disconnecting & reconnecting and have tinkered with most related settings I am aware off, but all in vain.
I found a crude workaround accidentally. I restart my PC from the log in screen until the dual monitors start in the extended view (how this works!). It usually takes about two to three restarts.
When I was running Windows 7, my system had a small solid state C drive that did not have enough space for windows 10 upgrade. I got a larger 2TB regular hard disk and used the manufacturer's software to clone the old Windows-7 SSD C drive to the new 2TB and then upgraded to Windows 10.
Now under windows 10, when go into defrag, the C Drive shows as a Solid State drive and of course windows does not want to optimize it.
The new drive definitely is not SSD. I assume somehow that setting was cloned from the old disk.
Is there either a way to change the C drive to a regular "hard disk drive" or force windows to defrag what it thinks is a SSD?
Problem: When I click on my H: drive or try to access it from the command line, it gives me an access denied error. However, all of the applications that I have installed on that drive run without issue. So, there is some access there. (See attached images. The first shows the hard drive state in diskmanager and in windows explorer. The second image shows the minecrafter launcher profile (that it is stored in H: and the application running, proving that there is some access.
System: Home built PC: (C:) 240GB SSD for OS, (E:) 1TB HDD for file storage and backup, (H:) 1TB HDD for large applications and video editing files. All drives are Simple, Basic, and none have encryption. All use the SATA connectors.
Process: I had Windows 7 Home 64 bit with, among many other things, Comodo Internet Security, Virtualbox, ImageDisk.
During the upgrade process, I noticed that Windows 10, during the upgrade, ran the file system check and fix "problems" on the H: drive.
(Side note) Having forgotten to uninstall Comodo before the upgrade, I did not have network after the upgrade. The fix was non-trivial as I had to use a second computer to download the unofficial comodo uninstaller. Reboot. Uninstall the network devices. Reboot. And once Windows 10 was up and running, it reinstalled the network devices and the network was available.
Still, whether before or after the Comodo uninstall and reinstall, the uninstall of ImageDisk, or the uninstall of the Virtualbox network device, I have no access to the H: drive.
I was moving video files (AVI) from an external backup drive (WD Element) to another external backup drive (Seagate expansion) after having moved another video file from my laptop (Acer) to that Seagate external drive. The night before I had moved some video files from the WD to the Seagate with no problem but using a different laptop (Sony). These video files are all rather large and I can tell that the space is still being allocated on the Seagate because while the folder cannot be seen the space that was there is still being used by the Seagate because I am missing over 100GB which would be about the size of that now missing folder.
What happened was there was a message that the Seagate drive could not be recognized while the files were in the process of being moved to that drive from the WD. This is after I had already moved a video file of about 26GB with no problem into that now missing folder. When I saw the message I attempted several times to move files to that Seagate drive but I could not so I unplugged the Seagate drive from that laptop (Acer) then reinserted it into the usb port. I got a repair message that said it needed to be repaired because some files were corrupted and that no data would be lost but the drive would be unavailable during the repairs so I checked ok. It took only about 30 seconds and it said the repairs were completed and the drive was available but I noticed that the folder that I was moving the video files to was not gone.
As I stated there are more than 100GB of files in that folder some are video and others are audio recordings that were created by using the myrecording (audio and video) features of the Acer laptop and they are very important so I need to figure out if they can be retrieved from that Seagate drive. I have not copied anything else onto that Seagate drive but I have plugged it into the Acer computer to ensure it is being recognized. Both the external drives WD and Seagate are plug and play that are powered from the usb -- they have no power adapters.
Pen Drive and external hard drive keep getting errors! So I select to fix the problem scandrive recommended scan and repair. But there's never anything wrong with them it reports! And it takes ages to scan it takes 10-15 minutes for 32GB pen drive. Windows 7 Pro done it in a flash! Anything I can do about it.
View 1 RepliesI have just set up a mirror drive(software RAID1) and want to change the drive letter. I am getting a message "The parameter is incorrect". I am wondering if I am stuck with the one assigned when the mirror drive was set up.
View 6 RepliesI have two physical disks in my notebook, one simple partition each, BitLocker encrypted. Drive C:, which is my system drive and drive D:, for some media stuff.Windows Version is Windows 10.0.10586 x64.I have configured VSS to use the "Previous Versions" feature in case I accidentally delete or overwrite a file. I did this on my Win7 install to and it saved my butt at least three times.
VSS is running (Volume Shadow Copy Service set to "Manual"), snapshots are there but when I right-click on a modified file (or on the root of the disk) and click "Previous Versions", my D: drive correctly displays the existing snapshots, on my system drive C: there is always a "There are no previous versions available" message. But, when I click the "System Restore..." button, I get a list with my snapshots, so I guess I could restore my system.
configuration seems to be ok and the two manual snapshots are there on both drives. For the moment there is no system restore point, but it does not work with snaps created by them either.
C:WINDOWSsystem32>vssadmin List ShadowStorage
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2013 Microsoft Corp.
Shadow Copy Storage association
For volume: (D:)?Volume{46482e7e-0000-0000-0000-100000000000}
[code]....
I am trying to set up our server which we have on my sisters new laptop. when I go to 'map network drive' and click 'browse' the server called 'BGE-B-NAS' doesn't appear on the list. I have tried multiple times and nothing seems to be working. I also tried to type it in manually but it just said that 'windows cannot access BGE-B-NASCompanydata'. Is it to do with the fact that this is a laptop and it is using the wifi instead of being wired?
View 1 RepliesI currently have a PC that is running Windows 8.1. I have a 120GB SSD as the primary drive ( C: ) with the OS and a few programs installed on it. I also have a 750GB HDD ( D: ) installed in the computer. Over the past year and a half, I've installed some programs to the SSD and some to a folder on the HDD. I plan on updating this computer to Windows 10. To do that though, I was planning on wiping the SSD and doing a fresh install to it and just reinstalling any programs. My question is if there will be any issues regarding the programs installed on the HDD. I'm guessing some of them probably still have certain files installed on the SSD and that wiping it will mess up those programs.
I'm also wondering what a good way of installing programs to a secondary drive is for the future. I'd like to install some programs to the secondary drive without worrying about certain files still existing on the SSD while still being able to install some programs to the SSD itself. This way if updating in the future, I wouldn't have to worry about this issue. Let me know if this makes sense and if I need to clarify something.
I just bought a new 850 EVO and i am trying to make a clean install of windows 10 pro through my optical drive, not a usb drive. I turned bios to AHCI and everything seems fine. At least everything worked fine with windows 7. So the problem is that after the installation asked me for first time to restart my pc and i removed the DVD, then bios showed me that there is no Hard drive in my system, after making the AHCI checks.
View 1 RepliesMy laptop doesn't boot because OS is on E: drive instead of C: drive
When I try to boot it up (it somehow boots up as windows 8.1 instead of my OS windows 10), it gives a BSoD and shows the error code 0xc000021a. I created a bootable USB drive with windows 10 pro on it, but it shows my OS as windows 8.1 instead of 10, and it doesn't allow me to restore or do a startup repair, because they both fail.
Booting up:
Repair shows windows 8.1 instead of 10:
Ever since doing a fresh install of Windows 10, in "This PC", my secondary hard drive is not in the list. I have already tried right clicking "This PC" and clicking Manage -> Disk Management, but there is nothing there except my SSD with Windows 10 installed.
I have tried changing SATA cables, SATA ports, but it still does not appear in This PC. I have also tried installing my hard drive on a another computer to see if the files were corrupted. They were not, all files were still the same before the installation of Windows 10. I did not leave the hard drive plugged in during the installation.
In the BIOS, my computer recognizes both my SSD and my hard drive, but in This PC, it's still missing.
So I'm wanting to start with a clean slate on my C: Drive (SSD) by blowing it all away and reinstalling windows. However I would also like to leave my D: Drive (HDD) as it is. Is it possible to do so without backing up my D: to an external drive as I do not have one?
As of my attempts so far the only options I have been given are the ones in my picture attached .....
How do I wipe my C: Drive but keep my D:?
Basically, I plan to disconnect every other Drive from my computer (my 2nd SSD and the HDD I use for data storage). From there, I'd do a clean install of Windows 10 onto my SSD.
Will that SSD become my C Drive by default (I want it to)? Will is stay that way when I reconnect my other drives provided I continue to boot from my SSD?
1) the HD in my laptop was dying, so I ordered a replacement, and tried to create a recovery drive so that I could reinstall Win 10 when the replacement arrived
2) Windows asked me to use a drive of 16 gigs or larger for my recovery drive
3) since I didn't have any USB flash drives of that capacity, I used an old, 40-gig IDE drive (IBM Deskstar) that I connected to the laptop via the USB port; at the end of the process, Windows claimed that the IDE drive had been successfully formatted
4) the replacement HD arrived; I inserted it into the laptop and re-connected the IDE drive via USB
5) when I turned the machine on, it seemed to recognize that there was a drive plugged in at the USB port, but it did not seem to be reading the relevant information on the drive: I got a menu with several options for installing/re-installing Windows, but when I tried various options, the computer did not recognize any "source" from which Windows could be reinstalled.
What I should do? The IDE drive has many possible pin settings (master, slave, etc.), of which I have tried several so far -- which setting(s) should I be using so that the computer is able to properly read the drive?
After cloning a new ssd the new drive won't boot. The bios recognizes it but the only way to get the machine to boot is to connect the old drive. I'm guessing I'll need to try to clone again or maybe install from the back up?
View 6 Replies