Can't Install OS - Reboot When Launching Installation
Feb 6, 2016
I have been trying for hours to install windows 10 home on my newly built PC but i can't because there is a problem. I bought the usb version since i don't have an optical drive bay.
The problem: I can start the setup, but when i launch the installation my pc suddenly restarts and boots the usb again, so i get back at the 32/64 bit selection screen. This happens when i click "next" after choosing my drive (see included video). The drive i'm using is a Samsung 850 EVO SSD.
I have tried numerous things to fix it including: removing the ram (2x8GB) and putting it back, trying with one ram stick, removing the graphics card and use the integrated graphics card, use different usb ports, use different sata ports, removing the hdd (i can't even start the setup with the hdd plugged in).
I also downloaded Windows 10 from the official website and put it on an other usb stick, the same problem occurs.
I even tried with Ubuntu and the same problem happens!! When i launch the installation my pc reboots and the setup restarts!
I have made a video showing what happens (win 10): [URL] ....
I also made a video that shows my BIOS: [URL] ....
Everything looks fine... but it doesn't work!!
View 3 Replies
Similar Messages:
Feb 10, 2016
I have been trying for hours to install windows 10 home on my newly built PC but i can't because there is a problem. I bought the usb version since i don't have an optical drive bay.
The problem: I can start the setup, but when i launch the installation my pc suddenly restarts and boots the usb again, so i get back at the 32/64 bit selection screen. This happens when i click "next" after choosing my drive (see included video). The drive i'm using is a Samsung 850 EVO SSD.
I have tried numerous things to fix it including: removing the ram (2x8GB) and putting it back, trying with one ram stick, removing the graphics card and use the integrated graphics card, use different usb ports, use different sata ports, removing the hdd (i can't even start the setup with the hdd plugged in).
I also downloaded Windows 10 from the official website and put it on an other usb stick, the same problem occurs.
I even tried with Ubuntu and the same problem happens!! When i launch the installation my pc reboots and the setup restarts!
I have made a video showing what happens (win 10): OS installation problem - YouTube
I also made a video that shows my BIOS: Gigabyte GA-Z170X-Gaming 3 BIOS - YouTube
View 1 Replies
Feb 6, 2016
I bought the usb version since i don't have an optical drive bay. The problem: I can start the setup, but when i launch the installation my pc suddenly restarts and boots the usb again, so i get back at the 32/64 bit selection screen. This happens when i click "next" after choosing my drive (see included video). The drive i'm using is a Samsung 850 EVO SSD.
I have tried numerous things to fix it including: removing the ram (2x8GB) and putting it back, trying with one ram stick, removing the graphics card and use the integrated graphics card, use different usb ports, use different sata ports, removing the hdd (i can't even start the setup with the hdd plugged in).
I also downloaded Windows 10 from the official website and put it on an other usb stick, the same problem occurs.I even tried with Ubuntu and the same problem happens!! When i launch the installation my pc reboots and the setup restarts!I have made a video showing what happens (win 10): I also made a video that shows my BIOS.Everything looks fine... but it doesn't work!!
View 5 Replies
Aug 6, 2015
I am not sure I want to install just yet, there are some issues I need to check on first so I need to delay the install.
Is there an option to cancel without removing the download or is the only option to not accept the EULA and would this cause problems later when I have decided to upgrade?
My main concern is that as I have used CCleaner and Disk Cleaner since installing W7 around 5 years ago. Will W10 be able to revert back to W7 or will the installation files have been removed in which case reverting back may not be possible?
View 3 Replies
Jul 29, 2015
I installed Windows 10 fairly quickly on my laptop, and firlgured it'd be just as painfree to do so on my desktop, but the install was stuck at 'Copying files - 48%' for hours. I figured that since it was just copying files, I would just restart the PC and start over, but now my PC does not want to output video. On startup, I don't even see the normal BIOS screen, and there is only HD activity for about a second after I power the PC back on.
View 2 Replies
Aug 4, 2015
I went through the install process of Windows 10. It installed, and then asked to restart. I allowed it to restart then nothing changed once it came back from a reboot. Still Windows 8. No popup showing install is continuing. Nothing.
View 1 Replies
Mar 12, 2016
Don't know if this is a hardware problem or not, Trying to install W10 from USB stick on a ASRock Z87 professional board with default UEFI settings loaded.
The machine boots to USB, then shows the Windows Logo for 10 seconds, then reboots and repeats this loop so I can't even install.
View 1 Replies
Aug 27, 2015
Upgraded to Windows 10..
Problem is audio driver. Each time I use the driver on ASRock page it says its two part process.. says it uninstalls old Realtek driver, reboots, and installs new ...
Each time it reboots and starts over saying it has to remove old. I tried removing old on my own first and starting over.. still no effect.. what do i do ...
I am a bit suspicious if Windows keeps on installing an older driver or something so it keeps starting over...
View 1 Replies
Sep 12, 2015
Upgrading from windows 7 to 10, started install at around 10:30am and left it....around 2:30pm it started the large circle with the % in the centre, and again left it for another hour or so and came back to a black screen, no cursor or anything.
I waited until about 7:30 and still nothing and did a reboot by holding the power button down. On restarting, I get the windows 10 logo with the spinning dots, and then it cuts to black with no cursor. The CPU light does what it would usually do on startup, and when it first cuts to black but then the screen seems to change to a different black (if that makes sense?!) and the light only blips extremely quickly with a long period before it blips again
i know this is another update gone wrong post but I can't seem to find any with the same problem, just similar ones. I've read it can take a long time, but it's been nearly 11 hours and is very frustrating!
i'm not mega pc savvy, I get 2 options when I boot, and I've looked and there's no option for me to do a safe boot, or to revert back go windows 7. If I leave it on black screen for too long it automatically goes into sleep mode.
View 4 Replies
Dec 10, 2015
I am trying to clean install windows 10 on a custom build pc. I have a installation usb created by the Windows Media Creation tool. I boot, it goes into set up, and I choose which partition and all that. It begins installing. Then it restarts after it finishes getting the files ready.
This is when things go off the rails. When it boots back up, it returns to the initial set up screen. As if I had not just gone through the first part of the install. I have tried a few times and same result.
Build: OCZ SSD 240 gb
Asus MB
AMD CPU
I can write out the rest if it is relevant.
View 1 Replies
Aug 26, 2015
Since upgrading to Win 10 anytime that I reboot my machine I get a screen where I have so many seconds to accept either Windows 7 or Windows 7 recovered. I let the timer run down or I hit enter which would load the Windows 7 OS. However Windows ten loads.
View 4 Replies
Sep 5, 2015
I have recently been trying to upgrade to windows 10 on a used alienware aurora r3 pc. I got my reservation, checked the windows 10 app every day, and finally, I was ready to get the upgrade, but I'm having issues installing it. After windows update downloads everything and I get to the installation proper, it takes like 4 hours for it to get to about 30% and then finally reboots. I'm taken to a windows ten loading screen, but each time I get to this point, the loading circle freezes. If I turn the pc off at this point and back on again, it reinstalls my normal windows 7 and I'm able to get back to my files and everything, but I still really want to get 10. Solved Build 10041: Freeze on Restart - Windows 10 Forums My issues seem to be similar to what is described in this article, and it may have something to do with it setting "fast reboot" on by default. What do I need to do to resolve these issues?
View 9 Replies
Dec 29, 2015
Bought new motherboard, a new PSU tried loading win10 umpteen times from ISO ( same with win 8 + gen key ) I get this far all the time every time. Just won't go into Windows proper. All the fixes like restore/reset don't work.
I can get the command prompt > but don't have the expertise to know what I could type to understand why I can't progress into any windows OS
tried partition magic + hirens boots to completely wipe the drive then clean install windows have run memtest86, HDD tools, no bad sectors, oh mouse/keyboard are new too . Its only the CPU I haven't changed and that is nicely set at low temp, as in BIOS I've upped the fan to keep it cool.
View 5 Replies
Oct 17, 2015
I've just bought a new SSD (Samsung EVO 850 250GB) for my Dell XPS 15 (L521x). After I inserted it into my laptop i intalled Windows 10 Home Pro. The installation process happened without any error, the laptop restarted several times (which is normal during the installation) and then booted to the desktop. again, no error whatsover. now, when i try to turn off or reboot my laptop, it is not able to power off automatically (i've waited for over an hour). so i have to power it off forcefully by pressing the power button for several seconds). if i want to reboot the laptop, it gets stuck at the dell logo, the little circle is spinning but nothing else is happening. i have updated all drivers, tried to boot into safe-mode, nothing worked
The current bios version is up to date (A16), SATA operation mode is AHCI, according to Samsung Magician (which i was able to install) everything is configured correctly.
View 1 Replies
Aug 3, 2015
i have a toshiba satellite laptop with a windows 7 operating system. i began to install the windows 10 upgrade but at 75% the computer went into a reboot cycle. i tried some settings in the BIOS and the computer continues to restart.
View 2 Replies
Aug 30, 2015
I've been trying to update my windows 8.1 to Windows 10 for at least 10 times now and it always stuck at around 60% It reboots itself a few times and it always comes back to the circle screen with the % progress but getting around 60% it reboots and it gets stuck there... black screen, no cursor, no sound.
I've tried to plug it into a secondary screen thru hdmi but nothings happens; also I've uninstalled my antivirus since I've read it might be the problem but it didn't work..
I've got a Dell Inspiron 7537 Windows 8.1 x64 Intel Core i7, 8gb ram, Intel HD Graphics 2gb + Nvidia Geforce
View 1 Replies
Oct 22, 2014
We've written before about Windows 10's new updating policy, and today we're seeing the real-world result for the first time. The Windows 10 Technical Preview, build 9849, is being updated to build 9860. That update will roll out automatically to members of the Windows Insider program, and it will be delivered through Windows Update.The operating system upgrade is a little more heavyweight than a regular hotfix; systems will need to reboot to finish installation, and Microsoft says that the reboot will take longer than normal.
The major feature of the new build is that it contains the first iteration of Windows 10's notification center. At the moment, it's a simple collection of historic notifications. Microsoft says that future builds will add more capabilities to the notification center, such as the ability to take actions in response to notifications.First major update to Windows 10 Preview, delivered through Windows Update
Before talking about the new things, I will remind you that you are using a work in progress. As Joe said in his last post, we’re sharing things with you even though there are rough edges. This is the part of building Windows that you usually don’t get to see, since we work hard to smooth these out before it typically gets to you. There are likely many small bugs that you’ll encounter, but these are a few of the big ones that we think you should be aware of right away:
In some places the UI design has gone “backwards” temporarily while we’re working on the final experiences. For example in this build we know that it’s harder to join a Wi-Fi network. We’ll make changes to fix that later.Another example of some UI “roughness” is sometimes Internet Explorer glyphs look garbled and items on the Start menu might disappear. Not everyone will see this, it depends on your display driver. We have a fix for this one coming soon.Some machines may wake up and not go back to sleep properly.Microsoft Solitaire and Mahjong games are broken in some cases and won’t launch.When using 2 external monitors over Display Link, you may get a blue screen when you undock. This does not appear to be an issue when using just 1 external monitor. URL...The download will range between 2GB and 2.74GB depending on CPU architecture and language.Wow, that's like 2 or 3 complete Linux ISO's.
View 11 Replies
Sep 14, 2015
I've just copied my 500gb disk into 128gb SSD disk using EUSEUS Partition Master. After that MBR,boot and BCD was screwed up. I couldn't boot from SSD. So i've just used Windows 10 installation DVD then fixed mbr,boot and rebuilded bcd. After that F11 function key which is used to run Lenovo Recovery enviroment dissapeared from pre-boot menu. What i need to say that on HDD disk everything works perfectly. I don't use this HDD anymore, just SSD. I want to be able to run recovery enviroment from pre boot (using F11 key).
View 2 Replies
Jul 31, 2015
Downloaded Windows 10 and started installing it. The install got to around 20% and now I'm stuck on a black screen with "Reboot and Select proper Boot device or Insert Boot Media in selected Boot device and press a key". I have gone into BIOS and changed boot order around but it doesn't seem to make any difference.
View 1 Replies
Nov 3, 2015
I am getting that error at splash screen after failed dual boot install of Debian. It was on the same drive, but I do not have another PC to get a boot repair or any other tool. I could go to a friend as last resort. Tried setting bios, still doesn't work.
View 4 Replies
Aug 9, 2015
The tiles I've put on the start page for various apps (all resized to small) and arranged in groups are rearranging themselves randomly and resizing to medium each time I reboot. I can't find any reason for this. Also, is it possible to start more than one app at a time using the tiles? I've tried searching here and using Google but nothing at all comes up.. It's a clean install after upgrading.
View 1 Replies
Aug 8, 2015
Lenovo ThinkCentre, 32bit was running fine on Windows 7 Home. The upgrade to Win 10 downloaded fine and started installing until the final bit Settings etc when there was a brief error "KMODE EXCEPTION NOT HANDLED" without any further info. No codes, numbers or anything else. Installation continued until 97% and then started rebooting in a loop for several hours already.
I'd prefer to finish the installation properly, but otherwise would like to roll back to Win 7 and have a usable machine with all data and programs intact.
View 2 Replies
Aug 15, 2015
I downloaded Media Creation Tool 64 bit.First i clicked "Upgrade my PC now" it downloaded Windows 10 and asked me to reboot. After that blue windows 10 logo appeared I have waited like 2-3hours but nothing happened. I tried even installing through USB but same thing blue logo appears and nothing... Why can't i install Windows 10?
PC Specs:
CPU:Amd Athlon II X4 641 Quad-Core Proccesor 2.8ghz
GPU:Amd Radeon HD 6700 Series
RAM:4GB
OS:Windows 7 64bit
View 1 Replies
Oct 10, 2015
When I try to install windows 10 into my newly built pc, everything goes normally... then it says that the pc need to reboot, and it does. After the reboot, the windows logo appears and it brings me back to the windows installation process.
View 1 Replies
Mar 27, 2016
store app not launching in my windows 10
View 1 Replies
Nov 14, 2015
My computer is trying to install Update to Windows 10 Home, version 1511, 10586, but can't. It claims there is no system reserved partition, but there is. This computer was upgraded from Windows 7 to 10, and immediately after doing that I installed a Samsung SSD and migrated the system to it using the software that came with the SSD. The migration went well and I've been using Windows 10 for months.
All of a sudden, when trying to do some updates it claims it cannot update the system reserved partition. The partition is there, it's 100MB in size. So I tried booting from the install CD, which I burned to do the upgrade (so I know it's a good disc). My computer recognizes there's a disc in the DVD drive, but no matter how I set the bios boot order it will not boot from the DVD, so I can't do a repair on the SSD.
View 11 Replies