Can't Make Any Changes And Now Stuck On Public Network

Feb 21, 2016

First I wanted to boot into Safe mode, but couldn't do that because the keyboard was not working in BIOS. To solve that I just removed the battery and left it out for around 10/15 minutes so that any residual power would be dissipated.
 
Once I managed to get into Safe mode I made some changes to my user account and added myself to the Aminstrators group. Then rebooted back into normal mode , where I could make changes and click on the YES button.
 
Finally onto the network problem of being stuck on a Public network. Now that I could open the properties box of the ethernet adapter , I saw that the 'Obtain the following IP address option was selected, but there was no IP address there. Once I changed that to 'Select automatically' solved the Public network problem as it was change back to Private Network automatically.

View 1 Replies


Similar Messages:


Networking :: Cannot Change Network Location From Public To Private?

Nov 3, 2015

I have extensively viewed the net for a solution, and have tried (as far as I know) every suggestion to make the change without success.

View 8 Replies

Networking :: Change Network Location From Public To Private?

Aug 14, 2015

How to change Network Location from public to private in Windows 10?

Have tried regedit, powershell etc.

View 9 Replies

Networking :: Network Setup - Sharing Public Folders

Dec 29, 2015

Trying to set up a network for the first time. My intention was to share public folders but when I right click on my user folders (e.g. PCUsersDaveDocuments they are shown as "Shared" and clicking on "Stop sharing" doesn't seem to do anything. Am I missing something.

View 3 Replies

Networking :: Windows Will Not Stop Changing Network Location To Public

Jan 25, 2016

I have been fighting this problem ever since Windows 7. Every time I try to access my computer from another device on my network, I find I am unable to connect. I go into the Ethernet settings, and see that Make This PC Discoverable is turned off. If I switch it on, go back, and then immediately open the settings again , it is switched off again. When I look at my Network and Sharing Center, my network is set to Public network.

The only way I've been able to successfully set it to Private and keep the Make This PC Discoverable setting turned on is to change the Category setting in the registry for my network to 1. It works, and I'm able to do whatever it was I wanted to do over the network. But then the next time I want to access my PC from my LAN again, same thing.I have tried all the suggestions I can find, most of which are mentioned here: Network Location - Set to Private or Public in Windows 8.Nothing prevents it from going back to Public again after a while.This is incredibly frustrating as it completely defeats the purpose of having a local area network!

View 1 Replies

Network Keeps Changing Back To Public - Switch To Private Not Staying Intact

Aug 5, 2015

Any way to switch Windows 10's WiFi network type to Private and make it to stay like that? I can even manage to switch from Public to Private using a small trick, but some time later, it will switch back to Public network!

View 3 Replies

Stuck In Safe Boot - No Network / Cannot Login

Jan 31, 2016

So I started my pc today and my window search didn't work anymore, just blank no results and everything felt very slow. so i restarted into safe mode without network and now it restarted asking for my windows login which is linked to my email. But i have no network so its not logging in. i have tried f8 when restarting but don't get any options to choose which boot mode you want as you could in windows 7.

I am trying to create usb windows 10 recover/install on my other laptop but its failing.

View 2 Replies

Why Can't Move Public Folders

Aug 1, 2015

When I was running Windows 8.1 I had moved my Public folders from C drive to D Drive (My C drive is an SSD and want to keep it for OS not Data) - After upgrading to Windows 10, Public folders have reverted back to C drive. I can see an option to move them if I right click the folder in File Manager, but event though the path text box is enabled (i.e. I can select the text) I cannot edit it. I have tried running file manager in administrator mode but it makes no difference

View 1 Replies

How To Obtain Static Public IP

Apr 2, 2016

I very frequently host small severs and such things but my IP is always changing and they and I are becoming increasingly frustrated. Is there a way I can freeze my current IP?

View 1 Replies

Accounts :: No User Account - Public Computer

Jan 21, 2016

Is there a way to run Win10 without any user account, a completely open computer? There seems to be no way to complete an install of windows without a phone number or e-mail account. Isn't there a way to run a computer with Win10 that doesn't require any user, a "public" computer.

View 9 Replies

Public Folders Content Visibility For Other Users?

Oct 10, 2015

In Windows 7 every user inherited content of "Public" user folders such as Images/Music/Video.Now I don't see "Public" content in my user folders anymore. What could be done to unlock this functionality?

View 2 Replies

Cannot Get Personal Account To Work In Public Documents

Dec 8, 2015

I cannot get personal accountz to work in public documents it will work for the user who created it but freezes for other user, I need this for myself and my wife to be able to use when logged into our accounts. This work just fine on windows7 but will not work on windows10. 

View 2 Replies

Apps :: Shortcuts Of Installed Programs Goes To The Public Folder

Feb 2, 2016

When installing programs most place their shortscuts in the Public folder instead of placing them in the user folder. What am i doing wrong? I never had this problem with Windows 8.

View 2 Replies

Networking :: Treat All Future Networks As Public Settings

Oct 3, 2015

In Windows 7/8 there was a setting, a small checkbox "Treat all future networks as public and don't ask me again".

You can see it in this picture - [URL] .....

In my version of Windows 10, I don't appear to have that option. I could try deleting this registry key ...

HKLMSystemCurrentControlSetControlNetworkNetworkLocationWizard
Delete the key: HideWizard

Perhaps there's a simpler way than export, delete key, if wrong result import saved registry file. Have I missed a setting somewhere to set the network location?

View 5 Replies

Networking :: Change All Connected Networks To Private Instead Of Public

Jan 31, 2016

Is there a way I can change all connected networks to private instead of public with a click-able script? The problem was that a User was connected to an open network using a VPN which then also connected showing Public. With both as Public, they could not map to a network resource. I fixed it using the "go to home-groups and change network settings, etc." But surely there is a way it could be handled with a simple script to edit same? End result was the VPN showed private while the open WiFi he connected to still showed public but he could access the server now.

View 1 Replies

Network Path Not Found When Trying To Access Computer On Home Network

Mar 5, 2016

Error code 0x80070035
 
I have two computers that I'm trying to get to communicate with each other so I can move files back and forth between them.  My plan is to make one of them the home's backup and main storage system.  the problem is that I can only seem to get one of them to actually communicate equally.  Computer 1 is a factory Lenovo Intel i3 computer.  Computer 2 is a home made AMD that I just built a few weeks ago.
 
Both are running Win 10 Pro.
Both are physically attached to the router. Heck, they're physically stacked on each other on my desk....
 
Using File Explorer, on the left side Panel under Network, it shows both computers: AMD and Lenovo.
 
Computer 1(factory) is able to the files on Computer 2 easily by going over through File Explorer.  But, if I click on one of the files, I get the message that I DO NOT HAVE PERMISSION. If I try to cut/Paste files from Computer 1 to computer 2, I get the same message.
 
Computer 2.  I am also able to see the computer listed under Network in the left panel.  When I click on Computer 1 to access it, I get a Network Error Windows cannot access Lenovo   (Computer1) Error code 0x80070035
 
I've tried the Diagnose option and it doesn't work.
 
If I click on a Drive under Network on the very computer, I can see the drives, I can see the directory list.  If I click on a file, I get the error.  Example on the left side panel on my AMD computer I select:
 
>AMD
>C:
>PerfLogs
 
It's at this point that I get the error: Windows cannot access  amdcPerfLogs as an example
 
I've tried running through Homegroup setup and Googled for days on setting up a network with Windows 10 and can't seem to figure out what I'm not doing here to make these computers talk and communicate with each other.  I eventually, want to get all my computers to talk to the AMD so I can use it for a main storage/backup for the home network.

View 1 Replies

Updates :: How To Stop Updates During Public Powerpoint Presentations

Sep 1, 2015

I am running Windows 10 via Boot Camp on the new MacBook Retina. I have always had the slimmest/lightest notebook as I travel extensively for work and the new Apple product is impossible to beat in that regard (and Sony went out of the VAIO business). I hate OSX, never run it, I just boot straight to Windows 10 and things are awesome. Except...

I am usually the key presenter at important board meetings and customer meetings. I have a big/heavy notebook at work which I use 90% of the time, but when I hit the road I'm using my sleek/light Windows 10 MacBook. Issue is, when I arrive at my destination and am shown to the presentation room, I boot up Windows 10, launch the Powerpoint file from Dropbox, and -boom-, within 5 minutes I'm speaking in front of a large group.

I am concerned that at my next presentation, I'll whip out my thin/light notebook and as I start presenting I'll see some message about Windows 10 updating -or- Windows 10 needing a reboot to install updates.

Does Windows 10 know enough not to interrupt a full-screen Powerpoint presentation? Is there a mode to disable automatic updates? Or with its new update protocol I am at risk of an embarrassing update moment at my next series of live presentations?

View 9 Replies

Networking :: Find Network DVR In Network And Sharing Center?

Oct 1, 2015

How do I find my network DVR in Network and sharing center?

View 4 Replies

Desktop Icons Stuck On Left Side And Explorer View Stuck On Details

Sep 28, 2015

All my desktop icons are stuck on the left side of the desktopAll file explorer view are stuck in details view. Now yes, I have turned off Auto-arrange, still refreshes to all icons on left. I have tired ALL sorts combinations of view + sort by... nothing. I have tired many anti-malware/virus scans and nothing has come up. I have tired CCleaner pretty much everything and the problem persists.

Of note, I had done a system restore a week and half ago to a specific point and that fixed the problem but for just a day, then it happened again. When I got around to having time to go for another system restore, that restore point was gone and now no other restore point is fixing the issue -_-That left me to think it might be something I installed or perhaps a windows update... but after having uninstalled pretty much everything I could that I installed in the last week as well as removing recent updates.... nothing. I have also tried making a new windows account (local)... nothing. Also tried in safe mode, still nothing.

View 2 Replies

Networking :: How To Rename Network 2 To Network 1

Sep 5, 2015

Just upgraded to Win 10 and kept losing internet access. After troubleshooting my home network is now named "Network 2". How do I change the name to "Network 1 "? 

View 3 Replies

Cannot Map Network Drive Or See Network Printer

Mar 9, 2016

Had phone system upgraded recently where I work. Router and phones where installed and right away half the computers where unable to connect to the server and the network printer is completely inaccessible.
 
All computers have new IP addresses now and only some of them are able to connect toe the server. The IP address for the printer times out when I try to ping it and it is the same for the old IP address of the server. These settings where not changed when phones where installed. The server still lists the old IP address on old Ethernet port but now has a new Ethernet port with new IP address that is being used by the working computers. Disabling this new Ethernet port disables all access to the server.
 
Trying to map the network drive with some computers does not work and says that the folder is not valid on windows xp or that windows can not access the folder on windows 10. On the working computers I can map the network drive normally with identical commands.

View 2 Replies

Drivers/Hardware :: How To Make Pop Up Appear

Aug 20, 2015

How to make the Pop UP appear in Windows 10?

View 1 Replies

How To Make The Num Lock Stay On

Aug 1, 2015

Whenever I boot up the num lock is off. I would like for it to stay on. Is there a way to fix this?

View 9 Replies

Make Windows Key Run A Shortcut?

Jan 10, 2016

I hate the windows key. How can I remap it to run a program instead? I want it to run a "show desktop" shortcut I got.

View 1 Replies

Any Way To Make / Add Custom Tiles?

Jul 30, 2015

Is there anyway to make tiles for Win10? Pinning apps to the start menu looks horrible..

View 1 Replies

Can't Make Taskbar To Hide

Aug 19, 2015

I cannot get the Taskbar to "hide" in Win 10...Have followed all the directions and checked the correct box but it just won't disappear!

View 3 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved