Can 64 Bit Boot Disc Be Created On 32 Bit System

Aug 19, 2015

I have a windows 10 64 bit computer which was upgraded from windows 7. I tried to do a restore but it came up saying unable to complete. Since then I have been unable to boot to windows. HP screen comes on and I am able to access Bios and Boot menu but that's where it stops. HP diagnostic tool at start says everything passes. I wanted to try booting from disc. I have another machine but its running windows 10 32 bit. Any way of creating a 64 bit boot disc from my 32 bit machine.

View 9 Replies


Similar Messages:


Just Created A System Image To Disc

Sep 15, 2015

I have just created a system image to disc, and I would like to know how I go about verifying that the disc is working. When I say disk it took 5 hrs and 19 disc's to finish. 

View 3 Replies

Created A Boot Disc Using MCT For Installing On New SSD

Aug 5, 2015

I have an Acer PC which was running an OEM version of Windows 7 SP1. I upgraded to Win10 using the regular upgrade process, and then created a boot disc using the MCT for installing on my new SSD. All went well, I was activated so I wrote down the Product ID (which I thought was my Product Key) and installed my new SSD. Installed Windows again, but in the process accidentally formatted the original HDD, which I wasn't concerned about because I had backed up my personal files and was looking for a clean install regardless.

Now I have 10 installed and running fine on my SSD, but it won't activate. I don't have the original successful install on an HDD anymore, and my OEM Windows 7 copy isn't available to recover to anymore either. I guess if the only option is rolling back to 7 and starting this all from scratch, how do I go about that, assuming I only have a Windows 7 .iso from the internet?

View 1 Replies

Upgrade Created Protected System Drive

Aug 20, 2015

Got caught by this sneaky Windows 10 downloading to my laptop. This download created a new partition on my harddrive as a protected system drive. I have tried to take ownership of this new partition with no success, I have tried to restore to a previous date with no success - it fails. How I can remove this partition from my hdd?

View 1 Replies

No System Restore Point Created During Microsoft Update

Aug 6, 2015

I upgraded from Win 7 to Win 10 this past week. All is well except for one thing. I received an update from Microsoft yesterday (Cumulative Update for Win 10 - KB3081424) and noted during the installation that no restore point was created. System Protection is ON and I am able to create restore points manually. Thus, this is only a minor annoyance since I can successfully create these points on my own. However, I would prefer for the system to do so when important updates from Microsoft come down. I guess it is possible that the update referenced above did not generate such a point but found that unusual since it is listed as a Cumulative Update.

View 4 Replies

How To Create Recovery Disc With Win System

Aug 7, 2015

I upgraded to Win 10 Pro.  I created a boot disc, repair disc. Now, I'd like to be able to recover from a system crash. How do do I create a recovery disc with the win system on it?

View 4 Replies

Installation :: Boot Disc Won't Load

Sep 19, 2015

Trying to install Windows 10 Pro 64 bit on an older desktop computer (AMD 4000+ CPU, Asus A8N-SLI Premium motherboard) and the boot disc won't get past the Windows logo splash screen; normally it would load the language and keyboard options after this, but in my case the process just hangs at the Windows logo and does not go past that.

I also notice that eventually the boot disc stops spinning in the drive, but the Windows logo remains. I've tried switching DVD drives but the same happens on another drive that I know is working

View 9 Replies

Can't Find CD / DVD Drives To Create System Repair Disc

Aug 17, 2015

One read-only DVD that will write CD's. Other drive is read/write CD's & DVD's. When trying to create a system repair disc, message says no cd/dvd drives found. ???

View 8 Replies

Cannot Use Disc Drive For DVDs Or Video Disc

Jan 26, 2016

System that doesn't use the disc drive for dvd's or video disc format is wrong - taking away something that now, you have to pay for. Do the wright thing Microsoft and reinstate the disc media player.

View 2 Replies

Installation :: Wrong Drive Letter In Msconfig / Boot In Dual Boot System

Jan 27, 2016

In my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect
Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition
Disk 1 : clone of disk 0

problem description : I see in msconfig / boot a wrong listing

windows 10 ( C:WINDOWS) : Current OS ; Default OS

windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )

Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.

The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?

I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....

View 3 Replies

No Boot Manager On Dual Boot System

Oct 9, 2015

Today I installed Windows 10 on my machine (ASUS N55SF laptop) for the first time on a separate hard drive. Now I have Windows 7 on my main hard drive and Windows 10 on my new drive (the latter being an SSD one). After installing Windows 10, I got a new boot option in my BIOS called "Windows Boot Manager" which is set as default, but it runs Windows 10 directly, I can't see any boot manager (I can assure "Windows Boot Manager" behaves this way because my BIOS lets me override the boot option, so that I can directly run any boot option, and this is probably the only way I can run Windows 7 currently).

If I go to Start → Advanced system settings → Startup and Recovery → Settings, I only see Windows 10 in the "Default operating system" drop-down menu, while I only see Windows 7 if I do this while on Windows 7. It's like the two OSs are not completely aware of each other.

View 9 Replies

System Won't Boot Only BIOS

Mar 26, 2016

I have an i7 build, asus z97a mobo i upgraded my graphics card from an nvidia 970 to a 980. When i powered up system went to bios, i cant get windows to boot. I reinstalled the 970, still no windows, then tried onboard graphics, took out mobo battery and jumper on board to reset, still cant get windows

View 1 Replies

System Service Exception On Boot

Aug 7, 2015

This evening I did a clean install after experiencing other problems. I got 10 installed and up and running fine; let me be clear, as far as I know, everything was working just fine. The first thing I installed was Chrome. No sooner had I got Chrome synced with my Google account, I got a BSOD citing "System_Service_Exception (ks.sys)" and it rebooted.

After that, every time it booted back up, within seconds of getting to the login page the same BSOD occurred. I've done some googling and I can't find a report quite like this nor any solution. I'm a big fan of Windows and I do really like 10 when it works, but I'm getting very close to reverting back to 8.1.

I had also plugged in a USB drive around the same time as installing Chrome but did not access it, if that is relevant.

View 3 Replies

BSOD :: System Crashing - Can't Boot To OS

Nov 16, 2015

My Windows 10 (64bit) has always had issues with "page fault in nonpaged area" errors, usually when rebooting from sleep. Yesterday, my system crashed again again. Instead of booting up as normal, it crashed again with the same error, rebooted, and crashed again. My computer can no long boot to Windows.

I've searched online and have seen that it could be my RAM, so I tried running one stick at a time and it didn't work. I also tried to use a bootable flash drive (made with Media Creation Tool) to reformat my hard drive / reinstall Windows 10, but I get the same error/crash when I boot from the flash drive.

Here's my system specs:

CPU: Intel I-4790k
RAM: G.Skill RIPJAW 2x8GB
MOTHERBOARD: Asus Z97-A ATX LGA1150
STORAGE: Samsung 840 EVO 250GB SSD

View 9 Replies

Reset Operating System And Now It Won't Boot

Feb 10, 2016

I used the Windows 10 rest pc feature and selected the options to delete everything off of my drives. There was a problem during the installation and I clicked the option to boot back into windows 10. The laptop just boots into the MSI splash screen over and over again.

View 1 Replies

Won't Boot ( System Thread Exception Not Handled )

Aug 1, 2015

Upgraded to Win 10 from 8.1 recently and it was working fine. This morning when I tried to boot it won't. Stays stuck in a 'your PC ran into a problem' loop and shows a 'system thread exception not handled' error.

I hadn't got a chance to create a recovery disk (the Internet tells me I need this to be able restore without losing my files and data).

I have a Win 7 laptop which I'm typing this on but which hasn't received its Win 10 update so that I can create a recovery disk on it.

View 5 Replies

Installation :: How To Merge Boot And System Partitions

Aug 19, 2015

I recently updated from Win7 to Win10. Initially when updating I was encountering an error, which I resolved by splitting my SSD into 2 partitions using CMD (I found this information through other posts).

Now the SSD is in 2 partitions, one being the boot partition (C) and the other system partition (Y). Is it possible that these 2 partitions can be merged together?

View 2 Replies

Installation :: How To Install On A Dual Boot System

Aug 13, 2015

I have two systems.System 1 is a desktop running W7 Premium SP1. I did clean install of W10 from iso on separate partition. W10 will not activate using W7 numbers. I suspect that is because I moved W7 to an SSD 6 mos. ago and W10 expects the old HDD. BTW, installed W10 to partition on the SSD

System 2 is dual boot laptop (Dell Inspiron) with W7 SP1 and W8.1. I want to keep W7, and I could try W10 install either by upgrading 8.1 or clean install to the 8.1 partition. Reccomendations? I don't want to risk losing the W7. I do have disk image backups of both W7 and W8.1.

View 6 Replies

Create Dual / Multi Boot System?

Sep 18, 2015

I had Win7 and did the free upgrade to Win10.

Before the upgrade I was smart enough to do a complete system image of Win7.

1. If I disconnect the Drive that Win10 is installed on and reinstall Win7 on a different drive, can I use the system image to recover Win7 back to the state it was before the upgrade?

2. Reconnect the Win10 drive and and boot up the system, will system ask which OS I want to boot up with at that point or will there be a conflict?

It's not that I don't like Win10 given I just upgraded on Thursday, September 17th and I need time to fully go thur all the operations and functions. I want to get a reasonable working knowledge and understanding of the Win7 OS, till I do I want the ability to keep and use Win7.

It took me quite some time to migrate from XP Pro to Win7 because I created a dual boot system for that purpose and I do not want to be FORCED cold turkey to switch to a new OS till I am ready to do so.

View 12 Replies

Installation :: Dual Boot System - RTM Partition No Longer Available

Feb 10, 2016

I created a dual boot system quite some time ago and all was well until.RTM partition was completely up-to-date. I had recently updated to Windows 10 Build 10251 on the Insider partition.I turned the machine off on Sunday January 31, left town, and returned Saturday February 6. All was well with the dual boot when I turned the system off before leaving. When I turned the system on last night, it booted directly into the Insider Partition. There seems to be no option to boot into the RTM partition.

View 9 Replies

Multiboot System - Does Another BIOS Boot When Selecting Non-default OS

Sep 14, 2015

Multiboot system with Windows 7 on 1st partition and Windows 10 on 2nd partition-same drive. Using the fancy blue Bootmanager Selection screen that comes with win10. Win 10 is the default OS. If I select windows 7 from the bootmanager selection screen the system does a complete bios reboot then goes directly into windows 7. Selecting windows 10 does not do this reboot, just starts win 10 as would be expected. Is this normal?? I have had Multiboot with Win 7 and XP and do not remember this happening.

Win7 partition is marked "Active" (first partition on drive) bootmgr file is on this drive I think
Win10 partition is marked "Inactive" (second partition on drive)

Tried turning off Fast Boot in Win 10 ....

Its annoying and time consuming to go through another complete bios boot up every time I select my Win 7 OS.

View 1 Replies

Installation :: Boot And System Ended Up On Different Hard Drives?

Feb 23, 2016

I have two hard drives (C: and E. Normally I have windows 10 installed on C: and just my documents on E: drive.

I had to reinstall windows. The reinstall put the Boot on C: and the System on E: drive. (See image.)

Is there any way of putting the system back on C: drive? (I didn't want to reformat both drives and reinstall windows again if I can avoid it.)

View 5 Replies

Option To Dual Boot When 2nd Operating System Is Not Present?

Aug 13, 2015

I recently upgraded my windows 7 to windows 10. I have had everything activate properly. I then decided to do a fresh install of windows 10. I loaded boot media on my pc and everything went fine. Now with the fresh install of windows 10, at boot up, I get the option to choose windows 10 or windows 7. How to I change this so it ALWAYS defaults and boots windows 10? Considering I wiped my hard drive clean windows 7 shouldn't even be an option.

View 4 Replies

Msconfig / System Configuration Is Showing Windows 8.1 Under Boot

Aug 13, 2015

I can't make it Windows 10....

View 6 Replies

System Thread Exception Not Handled After Upgrade From 8.1 On Every Boot

Oct 6, 2015

Today i've upgraded win 8.1 on my laptop Acer 5738DG to win10.Whole installation passed w/o issues and upon finalization laptop shutdown itself and each boot after ends with BSOD "system thread exception not handled".Even when i'm trying to start safe mode or clean install from boot-usb,it wont load but always end up with BSOD.

View 1 Replies

NTFS File System Error Boot Loop

Jan 7, 2016

Upgraded to Windows 10. Was working fine now NTFS_FILE_SYSTEM error boot loop. How do I get a repair disc to repair windows?

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved