This may possibly sound like a stupid question but can I mute the system notification sounds when I have headphones plugged in?
Last night I was happily watching a video with headphones when an e-mail came in; Windows blared a load BING at me.
ive noticed the notification sounds are way too loud. if i go into system sounds and hit the little green 'test' button it plays nicely at a normal level. but when the actual notification comes in i get this boosted version of the same sound that is extremely annoying. I have the sounds disabled for the time being
it happens even if i change the notification sound to something else. maybe ill have to make a custom version with it -12db or something then it might sound normal
I have a laptop with one jack for headphones and microphone. The computer will not register headphones being plugged in. The speakers work fine and continue going when headphones are plugged in.
I have the newest audio driver and I can find no way to get the headphones to work. I don't know if it's the hardware, Windows 1-, the drivers, or something else.
I have a desktop PC (see specs) that is persistently giving two different notification sounds but not showing a banner in the notification area to tell me what is warning/notifying me of. I think I have determined what events are being triggered by changing each notification sound in turn to a distinctive chime that is not used elsewhere. The two events concerned are "Device Connect" and "Device Disconnect". Strangely I seem to receive many more disconnect notifications than connects.
The sounds spoil my enjoyment when listening to music or watching movies etc. Obviously I can switch the sounds off by selecting "none" as the sound to play with these events but, just as obviously, I would like to know what is constantly connecting and/or disconnecting.
I am connected to a home network but I'm connected via ethernet cable and am not attaching or detaching any other equipment when the sounds occur. I'm a bit worried that I'm being scanned over the internet but I'm connected via a cable modem/router. Is there any way to show the reason for these notifications?
BTW, I'm using Windows Defender and Firewall together with the paid version of Malwarebytes.
Since upgrading to Win10 I've noticed as in the title, my action centre won't play any sounds or toast banner notify me at all. When I get an email in gmail, I'll see the icon in the taskbar go white, but absolutely no sounds or anything.
I've checked the settings and they're turned on, so I'm at a loss at what could cause it. Quiet hours are off as well.
Im New Member and New User for Windows 10. This is My 1st Thread..I Want This Icon as ICO to Use for Shortcut Icon and Pin to Taskbar (I Think Size is 128x128 ?) (Use for NirCmd)
View 3 RepliesHow I can setup one? Wish MS had a quick short-cut for muting / unmuting volume.
View 6 RepliesI've had Windows 10 since August, and for the most part, things have been going relatively okay. My only real glaring problem with the OS is that I can no longer here a sound during a system event. By that I mean the usual sounds like when you're clicking through the Explorer, emptying the recycle bin, a dialog pop-up and such.
My system is a Dell Inspiron N4100 that was previously running Win7 Home Premium, and now I'm running Win10 Home Edition. The sound in general works fine; like media players, games, and through the Internet browsers. It's only the system sounds that refuse to play.
I'd like my system sounds slider to stay at 10% of the overall volume. All other volume settings seem to stick. Windows rememebers my overall / winamp / browser etc. volume just fine. Only the system sounds revert to EAR-SPLITTINGLY LOUD at seemingly random times. Sometimes after a restart (but not every time), sometimes in the middle of a Windows session. Is this a known Win10 bug?
View 2 RepliesI have updated to Windows 10. After scouring the internet for options, I need to turn to ask the experts. Movies play, songs play... even the system sound previews play when I pick a sound scheme. But under normal computer operation, no system sounds play. The recycling bin, system errors, windows boot and shutdown, and email notification sounds are all silent in regular computer operation. I have performed the two prescribed sound card driver tweaks described online for issues of no sounds working at all.
View 3 RepliesI am having a problem booting up for my windows 10. Every time that i boot it up for the first time, it boots up with sounds but there is no display after windows 10 logo showed up. The only solution is i need to hard restart then it boots up properly.
View 1 RepliesI have a new HP Envy M7 laptop running Windows 10. I have an odd problem where all the stock windows sounds are distorted as if they are being unnecessarily amplified. All other sounds, such as videos, music, movies, etc, are all completely fine. I've tried looking through the windows sounds area, looking at the device properties, and also at the 2 different volume control areas with no luck.
When i say 2 different olume control areas, i mean the volume control icon in the taskbar tray, and also the "Bang & Olufsen" sound control icon in the taskbar tray. Bang & Olufsen apparently provides the audio products for this machine? Anyway, i can see anyplace where the windows sounds are being amplified.
My devices are:
Realtek High Definition audio
nVidia Virtual Audio Device
Intel(R) Display Audio
i have all drivers up-to-date.
For me, the notifications on my desktop only show mails, system notifications and nothing else. No other app uses the notification system, while they could (for example skype, viber, games and so on).The notification system is another failing feature or we hope to be improved?
And secondly is the expand button, where you can press the little arrow and it will show you 50 more characters of the message/mail you got. it is obvious that this doesn't work, if you have used it you know: if it is an email, you want to read it all, or you want to mark it as read, or you want to reply, but you cannot do it through the expand button, so it is useless. On w10m you can answer an SMS from the notification bar after pressing the expand button, which is great! But why not any other app uses that feature? Is the expand button another failing feature or we hope to be improved and used by other apps??
This has been happening for the last week. I need to know which update it rode in on so I can remove it. It is very irritating just like the Windows 8 to 8.1 forced update notification.
I have my system set to only notify me about updates, at which time I use the Update Hider diagcab to hide unwanted updates. But this is a new twist, now I am still forced to do updates from this obnoxious notification.
How would I shut this off, I disabled the Forced Windows 8 to 8.1 update notification through Group Policy Editor, would I remove this one the same way?
When it pops up, and it will pop up in the middle of my work, I can't DO anything except to click on it. This is mostly why I stick to Windows 7 because of cack like this.
This error started happening only on computers with 1511 installed. The original RTM of Windows 10 doesn't do this, nor do Windows 7, 8 and 8.1. I tried some Google searches but all I see are relevant to 7 or 8, not Windows 10. It must have been something changed between RTM and 1511 that did it, too.
When I refurbish computers for our employees, I wipe the hard drive completely (either diskpart "clean" via the recovery shell, or using DBAN to wipe the partition table if I can't get into WinRE.
I then boot it up using network boot. We have a Windows Deployment Services server set up so we can install Windows using PXE. I put the Windows 10 Enterprise Version 1511 .wim in there and it installs fine.
After install I make a local account, make sure the drivers get installed automatically (so far, it's been auto-magic for all our hardware, even NVIDIA and AMD graphics cards), install antivirus + MS Office and whatever special software that employee would need, and then I name the machine and put it on the domain.
To prevent extra crap from being created in C:/Users (and in the registry) I don't log in with a domain account. I let the employees do that themselves.
The first time any domain account* tries to log in, it errors after about 20 seconds with
Code:
Windows couldn't connect to the System Event Notification Service service.Please consult your system administrator.
If they put their password in again, it goes through and all the initial settings are applied from our Group Policy Objects.
*I noticed that if I log in as an account which is a Domain Administrator (and via our GPOs, is also added to the Administrators group on the machine), I don't get that error. It only shows up for "normal" users which are not part of admins.
Nothing critical by any means as it will always work on the second try, but I'm really curious why it happens at all. What service is it even trying to connect to? The fact it happens on literally every computer (it even happens in VMWare images which I've done to test GPO settings) would imply it's not a problem with a particular machine, rather something in our domain. Or it's possible there's a GPO that was set years ago for Windows 7 that didn't cause any detrimental effects until now.
I got me a new microphone and like most all microphones for PC there is no on and off switch, so on that note how can i mute and unmute it quick without having to click several things to get to the mute stuff. It saves also having to unplug and plug it in every time which would eventually we're usb ports out.
View 4 RepliesI am running the latest version of Windows 10 on an HP all-in-one desktop computer (27-1015t);
When listening to music, from the computer's CD drive or from iTunes, I like to turn off the computer's built-in low-fi speakers and instead listen to a pair of external powered speakers, which are connected to the computer's audio out connector;
Before going from Windows 7 to Windows 10, I could mute the built-in speakers without muting the output from the audio out connector;
Now under Windows 10 I can't find any way to mute the built-in speakers without also muting the output to the external speakers. One might think that the connector where I plug in the external speakers jack would automatically disconnect the internal speakers, ( as is true on iPhones, iPads, and the like) but that doesn't seem to be the case.
Is there any way under Windows 10 to play the external speakers only? Or is that HP's problem rather than Microsoft's? Since I *was* able to do it under Windows 7 but I can't now, it seems like a problem relating to the OS change from 7 to 10.
This is not okay at all. How can I make them not mute when I minimize them? Someone asked me to go to Settings>Privacy>BackGround Apps.iHeart radio is set to on and that has no difference. Groove music is not listed.
View 4 RepliesI am running Windows 10 Professional with current up-to-date updates on my Dell Inspiron Laptop.
Several days ago I noticed that plugging in current headset no longer muted the internal speaker. I know that it is not the headset as it works perfectly on another computer.
Doing a web search has not resulted in finding the problem, let alone a solution. Further my anti-virus is up-to-date, as are the microphone and speaker drivers.
Fresh installed windows 10 and when I plug my sennheiser game zero headset in the 3.5mm jacks I sound like a robot when I try and talk. I have tried talking right after a complete wipe install with usb and no drivers and have also tried after installing the mobo drivers (Gigabyte X79-UP4).
View 1 RepliesIs there anyway that I can "remaster" sounds on my pc.By "remaster" I mean...like setting the volume of a song e.g. to 90-95% (so I won't lose any frequency- sound) and then set the volume again to sth like 30% (cause my headphones are too loud).I've seen some digital music amps with this feature and i was wondering if this is also possible on the pc. I want this for several sounds ,not just songs..
View 1 RepliesI set my screen to turn off after ten minutes but it doesn't shut off. Today I read somewhere that it could be because I have a USB hub plugged in. Sure enough I unplugged the Hub and my screen shuts down as I have set it up to do. I need what is plugged into my hub and it is a real hassle to reboot my machine when I plug the Hub back in. I have also noticed one more thing and that is that programs that run in the back ground for instance Seti @ Home slows way down since the screen stays on.
View 4 RepliesIf you look in C:WindowsMedia, there seems to be some sounds that were created for Windows 10.
Like Windows Logon.wav. Did Microsoft scrap these sounds? For some reason, the option to choose a Log on or Log Off sound doesn't exist in the "Sounds" settings in the Control Panel.
I use a lot of custom sounds on my computer, they are all saved in .wav format. Up to this build of Windows 10TP they have worked.
But since updating to version 10049 they don't work anymore. I can play them from the folder they are in, but if I try and add them to Windows Sounds through the Sounds control panel the icons turn yellow and they won't play.
This may go along with Cortana not talking in this version, and I've found that the Text to Speech function in this version of Windows 10 doesn't function either.
I recently did the Windows 10 upgrade. Previously, my speakers worked fine. Now, they won't work at all. My monitor has speakers, and they do work when I select the monitor. However, Windows is telling me that my desktop speakers are not plugged in. That's not true of course - they are plugged in the same way they always were before, using the 3-colored jacks.
The speakers are basic Logitech speakers - two desktop speakers and a subwoofer. I found the devices on the Logitech support website, and checked for drivers. Logitech says these speakers have no drivers.
so I'm having problems with my audio. Whenever I play a sound it goes straight to my mic, even if my mic isn't plugged in, and my computer thinks my mic is. If I say play a Youtube video, whoever is in Skype can also hear it, and the only way that they can't hear it is if my mic is disabled. I didn't have this problem before upgrading to Windows 10.
View 1 Replies
