I bought the Windows 10 USB drive version for my new PC, my old one has the technical preview which has expired and I can't upgrade to 10 since my base windows 7 was Ultimate N, is it possible to use my windows 10 USB drive (full version) to install Ubuntu on an old pc? If so, will there be any risk, void warranty, just break it entirely?
View 1 Replies
I have been having problems starting up windows. I have a SSD in my laptop and I'm not sure if it is failing, or if my windows files are corrupt.
1.Windows will sometimes start, allow me to log in, but then freeze as soon as I get to the desktop.
2.Windows will start up to the login window and then freeze.
3.Computer will start, have a blank screen, but still have mouse that i can move.
4.Computer will start with error "hard disk (3f0)
Laptop does all four of these in varying order, but most often it would do 2.
I have not been able to get it started into safe mode yet. (freezes up before getting there).I do have a bootable flash drive with Ubuntu on it, but when it boot, it doesn't recognize the hard drive.
I bought Windows 10 for my new build. I didn't put a DVD drive in the computer because I knew I could boot from USB. How do I create a bootable USB drive with the Windows 10 CD? (I have a new USB with 16 gbs of storage)
View 1 RepliesWhen I am trying to bootcamp my mac using a windows 10 iso file, it gets about the third of the way and says "your bootable usb drive could not be created. an error occurred while copying the windows installation files". I have tried to unmount it in disk utility but there is nothing to unmount ...
I am runnning the latest version of yosemite and my mac is mid 2012
Tried looking this up online, but couldn't find any specific information. I'm running on Windows 10 Home, and I have a Windows 10 ISO I want to put in a flash drive so it's bootable. How do I do this?
View 3 RepliesAfter the recent update I had some problems and decided to reset my system. For some reason I could not boot from my bootable backup drive or a bootable USB drive. I have software which came with the external drive and it previously backed up and created the bootable USB drive. So, I reset the pc and of course it wiped out all my programs like the backup drive software, Ccleaner, Malwarebytes, etc. etc.. I reloaded the software for my backup drive and then was able to restore from the image which I had previously created. Of course I had to get the update again but it went well yhis time. All the programs were there and my system is operating flawlessly once again. The image backup was a lifesaver.
I highly recommend the external usb backup drive for recovery purposes. It was extremely easy to create the bootable image backup (for recovery) and keeps a running backup as well. There are numerous ways to create a backup but this was just too easy and, as it turned out, worked well for me.
I cannot seem to install any other way. Media Creation Tool will not start. When I mount the ISO and click on setup I am given a small, rectangular blue window that says "Windows", and it disappears after a second. I have a tried through Windows Update and get fail code 8007005. I also have been notified two separate times through "GetWindows10" icon that I am ready to install and once received the 80070005 code and the other time the famous "Something Happened" screen.I was able to create a bootable flash but my understanding is that I can only perform a clean install if I boot with it and would need to purchase an activation code.
I am running Windows 8.1 64-bit on an HP Pavilion 15 series laptop and I am able to successfully update anything through Windows Update except Windows 10 upgrade. All of my other *.exe files start fine except Setup on Windows ISO.
I upgraded my PC from W8.1 to W10, all went very smooth. I then worked on upgrading a laptop SSD drive to from W8.1 to W10 which I planned to then install in my wife's laptop. It was easier for me to upgrade the drive on my PC then swap the drives than take her laptop for awhile. Well...that created my problem. I had 2 drive C's on my PC.
I was able to boot quite a few times between the drives (swapping the primary drive in BIOS). But then W10 "fixed" my drives, and now I have only one C drive (the SSD laptop drive) and my original C drive is now F. My PC now only boots to the SSD C drive and I'm not able to use Disk Mgmt to swap the letters. Disconnecting the SSD drive stops the PC from booting because the original C drive is F.
How to either swap the drive letters or remove the SSD drive and somehow be able to rename the F drive to C.
Here is the issue I am currently at:
I have a Surface Pro 4 that I want to set up a Dual Boot on. I normally wouldn't have too much of an issue resolving this on my own, but due to the Surface Pro 4 not supporting Legacy flash drives, my standard way (Booting into a MBR Flash Drive w/ an Offline OS on it and doing the defrag/moving the files to the beginning of the drive) of solving this issue has left me baffled. I've attempted downloading Rufus and utilizing a MBR ISO (Which failed, since it didn't have the EFI boot sector on it), going back and forth amongst various methods of removing secure boot (which was a doozy at first, after having to go through recovering my BitLocker key) in order to boot from legacy, all to no avail.
Basically, I want to take my SSD, and move all the files to the beginning, which I can't do in Windows due to system files being in use (Ironically, a large portion being near the end of the drive). All I am looking for is a method to create a bootable UEFI flash drive that I can use to defrag/do this from. I've dug a little bit around on Linux and didn't find anything that seemed to be able to do it, as most options seemed only relevant to Windows PCs. Is there any options available to do this? Or would formatting and reinstalling it be the only option?
I have been trying to create a USB installation drive. I have the Windows10 .iso image. I have created a recovery USB drive but it doesn't allow me to access the image just the advanced options. I want to be able to do a clean install of Windows 10. So:I want to boot to the USB stick
I want to be able to format my drives.I want to be able to install a clean copy of Window 10.I have searched and searched online but can't seem to find a solution.
I've always wondered this, since people have told me that you can't copy the files from an .iso and do a clean install of windows, since it is not "Bootable", but I've actually done it many times. Maybe I just don't understand what they mean by bootable?
My understanding is that it means the USB drive can be chosen in the Bios or in the boot menu to be booted from, which is what you have to do to do a clean install of windows, which I have done many times by just extracting the files from the ISO with daemon tools and copying them to a USB.
To clarify, I am not "Upgrading" by running the USB while logged into windows, I am going into the bios and selecting the USB drive to boot too, and it automatically starts the windows installation, where I can then format the drive and install windows to it. Am I not really making the USB bootable?
I have a dell inspiron 7000 and recently reinstalled windows 10 into my laptop after I received a system thread exception not handled error with a bootable usb. After painstakingly spending a whole day (10 hours) I succeeded in restoring my laptop with windows 10. Nevertheless, I accidentally restarted my laptop while the bootable usb is still in the usb drive and now my laptop does not even load/boot. The screen just freeze trying to load up the OS as in the spinning dots when the windows first loaded up, after 3 dots loaded, the whole screen freezes. in addition, when I try to load up windows repair, it'll load up an extra dot and freezes at 4 loading dots; I can't even load into the hard-drive through BIOS. The good thing is that I can still access the BIOS and do diagnostic test and all the stuff from BIOS. Other than that, I'm unable to access my computer.
View 1 RepliesI have a bootable windows installation Thumb Drive. Can Macrium make a backup of this thumb drive so in the event of this thumb drive going faulty, I could make another Thumb drive with the backup image.
View 8 RepliesI've just built my desktop and I'm trying to dual boot Windows 10 and Ubuntu 15.04.
I've already partitioned my hard drive, and installed Windows 10 and Ubuntu 15.04, but I'm trying to get to a place where I can choose what OS to start whenever I turn on my computer.
At the moment, I can run both Windows 10 and Ubuntu 15.04 if I go into the BIOS and rearrange my boot priorities, but that's just a huge hassle. Is there a convenient way to choose at startup, similar to how Windows 8 had this?
I recently installed ubuntu with windows 10 for dual boot but i don't get the option to choose from them when pc starts, it goes blank for few seconds and starts up straight to ubuntu.
I installed ubuntu through ''something else'' in setup since i wasn't getting the option to install it ''alongside with windows 10'' ...
So how do i go back to windows 10, if not possible dual boot.
I installed ubuntu then uninstalled it by formatting partition and it works i can boot up to windows cause i have windows boot manager. But now I cant format 16mb that were dedicated to BIOS settings (i didnt understand this part but i had to make another partition for bios). And now I have 6 Ubuntu devices I can boot from in BIOS menu . Here is the pic of 16mb unlocated memory that i cant add to any of the drives.... I want to remove this. I want to remove every single thing from Ubuntu.
View 1 RepliesI set up Ubuntu in dual boot with Win 10 and tried to replace it with Mint, which failed at installation. I then had a "grub rescue" prompt regardless of what I tried. I fixed the mbr by booting from Win 7 .iso and running Bootrec /fixmbr.
I can now boot into Win 10 OK. However, when I first installed Win 10 and dual boot Ubuntu, the Windows 10 selection screen used an icon for Win10 and for Ubuntu. Now the Win10 selection screen is all text, like the original Win 7 screen before Win 10 upgrade. Possibly because I used a Win 7 .iso. I can't find how to get to a dos prompt when booting from Win 10 .iso. It is only cosmetic, but how to restore the Win 10 icon type.
Background: I was dual-booting Widnows 8.1 (came pre-installed on ACER laptop I recently purchased) and Ubuntu. This worked fine until I decided to take the free upgrade to windows 10 being offered. During the upgrade process, it deleted a partition for Ubuntu and ended up killing both OS. I was stuck with BIOS and how to restore my computer, particularly with both OS being able to co-exist peacefully.
I only needed to access Ubuntu for work purposes and my boss gave me a copy of both windows 8.1 and windows 10 (stand alone clean install). I did successfully install windows 10 but was not able to dual-boot to Ubuntu. Because I needed to prioritize work, I scrapped windows 10 and currently only run Ubuntu.
Good news, I quit my job and no longer need or want Ubuntu! I simply want to go back to the way things were meant to be and have my functioning windows 10- no dual booting. My questions are these: How do I restore my system to its original condition (with windows 8.1, if it still exists somewhere in my motherboard that is)? Considering that I am currently running Ubuntu, what do I have to do to make this successful (with the intention of getting rid of Uubuntu all together)? If I am unable to restore my system, then I will fall back to installing windows 10 (or 8.1 if that fails) clean; how do I extract my product license key from my system? It is not written down anywhere and windows will prompt me for it if I install from a CD.
I have a folder structure (see below) that is created after upgrade from W7 to W10. In my previous question a day ago it was confirmed that it could be used for creating W10 installation media. So I don't want to repeat how it was created. It was created automatically and it is 3GB in size.
My question: I burned files and folders to DVD using native W10 burn files to disk method. The disk is not bootable. The structure on the root of the disk is exact as in Windows folder on the pic. Did I miss the option for making it bootable? Or it should be bootable just by burning the content to DVD?
Since windows 10 has been launched and it has already been downloaded on my PC and installed. I wanted to know how to create a boot-able DVD so that I can also install it later, you know like doing a completely fresh installation and having the windows staying activated. Cuz windows was upgraded to 10 from 8.1 and Microsoft didn't gave me any key, so if I install it again on the same device will it remain activated?
View 1 Repliesis there any bootable file manager out there because I want to do the following things before installing Windows.
1. Format my C: drive with Windows 7.1
2. Move contents from my F: drive to C:
3. Install Windows 10 of F:
This is basically because F: is my old hard disk and I want to install Windows on it.
Had tried to update the BIOS on my son's Alienware Aurora R4 so that we could install an upgraded graphics card (980 Ti).
Used the Dell Support site - and was upgrading from Bios 7 to Bios 9 - would eventually go up to current version 11 before swapping GPU.
Followed all the steps on the Dell site - but afterwards - it acts like my hard drive has died (doubting this - have fairly new Samsung 512GB SSD as the only hard drive).
Computer boots into Bios now - but says "inaccessible boot device". My son had done the update from Windows 8 that came on the machine to Windows 10 - but apparently did not create a boot disk or USB drive.
Can I create a "generic" bootable USB on another computer - WITHOUT REINSTALLING WINDOWS? I do not want to lose info/settings on his machine if at all possible.
Waiting on Alienware Tech support to respond - machine is about 2.5 years old and out of warranty
I have downloaded all ISO images of Windows 10 through Media Creation Tool. Each ISO image is consisted on both versions (x86 and x64) of respective windows.
Now, I want to convert all Windows 10 ISO images in a single bootable USB in a way which will give me the list of selection of installation windows 10 at the time of installation.
I've added a Linux live disk (ISO) to a USB drive using Rufus & changed the UEFI so all the USB boot options are the preferred ones. My laptop still does not see the USB during boot (also the light on the USB drive stays off as if it's receiving no power).
View 5 RepliesMy gamer Laptop (ASUS G55VW ROG) is now upgrated from Windows 7 SP1. It went smooth and without errors.Before fiddle around too much I want to make a bootable USB-key with Windows 10 installaion to make a clean install possible if I mess windows up so it can't boot.But how do I make this bootable USB-key? I know I can "reset" the PC from "settings", but that only works if it can boot .I had the understanding, that it would be possible to make a DVD or an USB-pen to make a clean install? And what about cd-key when cleaninstalling from that bootdevice?
View 4 RepliesI have been using windows 7 ultimate for more than 2 years and now I want to upgrade to windows 10. My friend recommended a clean install, gave me an iso for windows 10 enterprise, tell me to use a program called rufus and referred me to this tutorial
My question is: Is it better do a clean install or simply upgrade from the built-in windows update tool? Then, if I should do a clean install, is rufus the suitable tool for making bootable usb?
