II am having trouble moving data to external sources via USB. It always happens partwaY through a transfer. It gives me messages like the transfer could not be completed, that the device is no longer found, or the files aren't available. Most times when I restart it the transfer gets a bit further than it did the time before, but never by much and when moving large amounts of files it makes transferring my media and data impossible.
Sometimes, after the computer is unsuccessful with the transfer the device is no longer recognized by the computer at all. It will call it an unknown device with ? next to it in the device manager. I try to install the drivers automatically but it just tells me I am using the newest drivers but will not register what the device is or allow me to view or transfer files on the device. Usually there is no problem transferring data from a usb connected drive to a different place on the same drive. It happens on both of my systems: An acer aspire one running windows 7, and a compaq presario running windows 10. It happens with all the usb ports (3 on each system). It happens even when I use several other cables to try to connect the device.
I seem to be able to copy files from the drives to the computer, but when writing to the drives it gets stuck. It happens with 2 external hard drives, 2 phones, 4 usb drives, a tablet, and sd cards. What is going on here? I don't think I could have that many bad cables and usb ports. If there is something wrong with write protection, wouldn't it just not transfer anything at all? I have checked for viruses. I can still play songs and look at pictures from the drives so I know the files aren't completely corrupted.
The Conexant HD Audio Sound Driver was replace by High Definition Audio Device after i update to Windows 10 Home Version 1511 from 1011
Now if i want to plug my earphones to the left side of the computer where the audio jack socket is located the sound does not transfer to my earphones except i will change the default sound device from speakers to headphones.
How can i set it to automatically when i plugin my headphones/earphones/external speaker automatically transfer the sound to this device without changing the settings?
I just trashed my old computer and built a new one (moved from Windows 7 to Windows 10). I had quite a few files I wanted to keep, so I stored them all on an external hard drive. I can play the video files in question from the external hard drive, but when I try to copy the files to my internal drive (so that I can store my external safely) the transfer rate quickly drops to zero and then after a few seconds a pop up tells me that the file cannot be found. I know this to not be true since I can still play the files.
I have this issue where the files and folders on an external device (such as an external HDD and USB) are not showing up, yet the device is visible. I only started getting this issue after I connected my USB to another computer which makes me think a virus caused this. Here's where I am at:
The drive in question is the "STEAM GAMES (F:)" drive. It shows up in explorer as shown:
And when opened, this is what's inside the F drive:
By showing hidden files and not hiding protected operating system files, this is what shows:
What I've tried: The command "attrib -h -s -r -a /s /d F:*.*" returns this: Full system scan using Anti-MalwareBytes and Avast! reveals nothing.Running RKill, UsbFix, RogueKiller, and iExplore.exe does not fix the problem.
I'm talking about one of the below transfer boxes. I no longer see one when copying files so I have to guess when it is finished. It seems to have started after my last weekly update. I'm running Build 11082 with all the latest updates.
Just set up new computer with windows 10 and am trying to figure out correct procedure to transfer old email, pics, documents, etc from the old computer running vista? I have an old version of a software called intellimover and a high speed USB transfer cable. Will that work ok with windows 10?
i want to upgrade to windows 10 pc, so do i have to transfer my existing files on C:/ and D:/ Drives or is it going delete every files from my pc while upgrading process?
I just received a new Win 10 PC with a 500 Gb SSD for my primary drive (OS and programs) and an internal 1Tb conventional HDD for my data (library).
I would like to transfer my programs and files from my existing Win 10 PC to my new PC. My existing PC has two conventional HDDs -- both are 500Mb. The C drive has everything and the E drive is a clone.
Both the new and old PCs are running Win 10 Pro x64.
What programs do you recommend? I do have Macrium Reflect that may do the job. I'll be checking with their excellent support this week.
If I attach a HD that has Windows vista 32bit to my computer that have Windows 10 64bit (an SSD). Can I transfer music off that old drive and store it on to a storage HD?
*Windows 10 64bit is on the SSD *I have a 1TB HD for storage *The old drive has windows vista 32bit
I'm about to buy a new Win 10 gaming rig and wanted to transfer my entire Steam programs + files (most of the games I currently play are *unfortunately* on STEAM) from my old Win 7 rig using an external HDD.
i'm on Windows 10 on a 240gb ssd, I want to transfer to an WD caviar blue-[URL] I don't know if I should boot from the hdd, but when I plugged it in, it had all the old files from my previous pc and is split into 3 How do I delete everything on it? Do I set it as default from the setup utility? I don't really want to re-install windows 10 on the hdd the only files I have on the ssd is mostly drivers but documents and music I want to carry over
I am using a Sharkoon Quickport DUO Docking station, in which you can mount barebone hard drives.The problem is, that when I try to transfer files from an external hard drive to - for example - my internal hard drives, I get the following error after a few seconds, and the transfer stops:
Ever since I upgraded to Windows 10 it takes HOURS to transfer even small files from my camera's SD card to the computer's hard drive via the built-in card reader.
The "speed" meter barely goes above 300 KBS per second.
Laptop Samsung NP300V5A. Sound stops working about a month after Win 10 upgrade. No changes done at the time.Audio devices show up under Device Manager, but not under Playback/Recording Devices. Same for Realtek Sound Manager - it doesn't see the devices. I can install, delete and update drivers under Device manager but it doesn't make any difference. It is not a physical problem, tested on Linux live CD.
Solutions tried: -Installing various versions of HD Realtek Drivers (including windows update version) -Installing/Removing Realtek software. -Enabling/Disabling devices under Device Manager -Called spirits of ancestors. Seemed like it worked for a while, but ended up being a joke. -Did system restore to various dates. -Restarted in safe mode -Restarted various services such as Windows Audio, Windows Audio Endpoint Builder, Plug'n'Pray, Power, etc. -Checked system, application and driver even logs. -Tried a couple of registry fixes. Angered spirits of ancestors. Turning gray.. -Reinstalled chipset drivers -Rebooted about 30 times -Sound Device Troubleshooting finds no issues -Display Disabled Devices is enabled
Windows 10 did an update on my wife's desktop that was incompatible with the Nvidia graphic drivers on it. As a result, the dual monitors no longer display. We took the computer to the local Microsoft store and they were fully aware of the problem and are working on it. But, after two weeks, the problem has not been solved. Meanwhile we bought a new desktop and had Microsoft empty the entire contents of the C: drive onto an external hard drive. They did and showed me that the external drive contained the root directory and program data that contains years of work using Lightroom.
I brought the external hard drive home and connected it. Luckily I can see the User Libraries but not the Program Data. Is there some way that I can make everything visible in the external hard drive so that I can copy the contents to the new desktop?
I finally got me a BSOD on my windows 10, on laptop. I was tranferring some music files from my ssd on laptop to an external hard drive in a wifi hdd enclosure. The error is "EXFAT_FILE_SYSTEM (EXFAT.SYS)".The HD (WD10EADS) in the enclosure is formatted in Fat32, and I was thinking that might have something to do it the error. But the HD has to be in Fat32 in order for the WIFI enclosure to be able to see the HD, per the instructions of enclosure.
With Win7 I used to open one external drive, then through My computer locate the other drive. I would have each drive on its own window. I could then select relevant files on one drive copy and paste into the other drive. With Win10 if I click on File explorer I can open one external drive, where can I locate the other drive to put in a separate window. If I click on the other drive, it just opens it in the same window. Win7 and previous versions used to be so simple.
I was moving video files (AVI) from an external backup drive (WD Element) to another external backup drive (Seagate expansion) after having moved another video file from my laptop (Acer) to that Seagate external drive. The night before I had moved some video files from the WD to the Seagate with no problem but using a different laptop (Sony). These video files are all rather large and I can tell that the space is still being allocated on the Seagate because while the folder cannot be seen the space that was there is still being used by the Seagate because I am missing over 100GB which would be about the size of that now missing folder.
What happened was there was a message that the Seagate drive could not be recognized while the files were in the process of being moved to that drive from the WD. This is after I had already moved a video file of about 26GB with no problem into that now missing folder. When I saw the message I attempted several times to move files to that Seagate drive but I could not so I unplugged the Seagate drive from that laptop (Acer) then reinserted it into the usb port. I got a repair message that said it needed to be repaired because some files were corrupted and that no data would be lost but the drive would be unavailable during the repairs so I checked ok. It took only about 30 seconds and it said the repairs were completed and the drive was available but I noticed that the folder that I was moving the video files to was not gone.
As I stated there are more than 100GB of files in that folder some are video and others are audio recordings that were created by using the myrecording (audio and video) features of the Acer laptop and they are very important so I need to figure out if they can be retrieved from that Seagate drive. I have not copied anything else onto that Seagate drive but I have plugged it into the Acer computer to ensure it is being recognized. Both the external drives WD and Seagate are plug and play that are powered from the usb -- they have no power adapters.
I have a prebuilt PC with Windows 10 installed on it. I want to upgrade the boot HDD to an SSD. Is it possible to do such a thing? If so, how do I transfer the OEM windows 10 from the HDD to SSD?
I just got a new laptop with windows 10 installed (upgrade of 8) on the hard drive which isn't an ssd, and I'd like to use an ssd I have Is there a way for me to put the factory install OS on my ssd?
The laptop doesn't have a dvd drive, but of course usb ports And the laptop didn't come packaged with any cds or what-not like the old days And it's a Lenovo if that makes any difference.
I just finished installing windows 10 on my HDD that had windows 7 on it. I bought a SSD specifically for an operating system but when I put windows 10 on it is kept asking me for a key that I couldn't find? How can I get windows 10 on my SSD and I am willing to have to re download all of my programs.
My old computer was a windows 8 that was upgraded to windows 10. I just ordered a new i5 6600 which comes with windows 10, a 250G SSD and 1 TB hard drive.. My old hard drive appears to be a Seagate Barracuda 1TB SATA which seems to be the same as the one in my new Vanquish. My old hard drive is 2/3 full and is backed up often. My question is can I move this old hard drive to my new computer as a separate drive without formatting it and use the data on it (or transfer my data) or does it need to be formatted (thus giving me roughly 2 TB of space with the 1 TB provided with the computer). It was my C: drive in the old computer.
My laptop has a fan problem, so I need to transfer my photos to a memory stick. In my old windows I could easily "send to" any photo and transfer it to a disc or memory stick, but I am so lost and frustrated on the new windows 10. I have only gotten as far as clicking the box, but can't figure out what next.