Cannot Boot From CD
Jul 30, 2015I cannot get windows 10 to boot from my cd I have changed the priority in the bios but still no luck...
View 1 Replies
Similar Messages:
Installation :: Wrong Drive Letter In Msconfig / Boot In Dual Boot System
Jan 27, 2016In my desktop I have two hard disks ( disk 0 and disk 1 ) . Disk 1 is a clone of disk 0 created by Macrium Reflect
Disk 0 : ( C: ) windows 10 pro , upgrade from windows 7 , ( E: ) windows 8.1 pro , ( G: ) Storage partition
Disk 1 : clone of disk 0
problem description : I see in msconfig / boot a wrong listing
windows 10 ( C:WINDOWS) : Current OS ; Default OS
windows 8.1 pro ( H:WINDOWS ) instead of ( E:WINDOWS )
Nevertheless the dual booting works fine as well as the shift between the disks via BIOS.
The question is , could I fix the situation using the EasyBCD of Neosmart Technologies to edit the bootloader ?
I see can change drive letter H: to E: and save the change , am I right or wrong ? or any other way ....
Reboot And Select Proper Boot Device Or Insert Boot Media After Installing From USB?
Nov 10, 2015After installing a 32 bit windows 10 from a USB by mistake I decided to upgrade to the 64 bit version. I have 3 hard drives, one of which is an ssd that I am trying to install the OS to. After downloading and setting up the media creation tool and creating a USB I restarted and boot form USB.
I followed the steps and deleted the existing windows 10 partitions on my dad and tried installing straight to the unallocated space. After the installation completed it restarted the installer, which is not what happened when I previously successfully install windows 10. I then changed the boit order to have my ssd first and rebooted, which gave me the Reboot and select proper boot device or insert boot media error.
Confused I loaded up the installed and there were correctly partitioned installs already on the ssd ( although one partition looked a little small). I tried reinstalling windows 10 with the same result over and over.
Installation :: Upgrade Path From Dual Boot Back To Single Boot
Sep 24, 2015My laptop has dual boot - Windows 7 and Windows 10. My Win7 environment is my main working environment with lots of programs installed and important files. I installed the Win10 environment just to play around with 10 during the technical preview. Now, I would like to disable the 10 environment and upgrade the 7 to 10. Am I able to do this, or have I already "used up" my one upgrade on this computer's Windows license?
I notice that in Windows 7 I have not received the icon in the notification area that invites me to upgrade to 10. This makes me think I might have used up my chance to upgrade.
My end goal is to have a single Windows 10 environment. Note that the reason I want to upgrade my 7 environment to 10 is because I don't want to have to re-install all of my programs and files into the current 10 environment.
Recovery Drive Boot Fails With Missing Boot Configuration Data
Feb 2, 2016When I try to boot from a recovery flash drive, it fails with: EFIMicrosoftBootBCD error status: 0xc000000f and message: The Boot Configuration Data for your PC is missing or contains errors.
The recovery flash drive was created on a Lenovo ideapad originally with Windows 8, now upgraded to Windows 10, latest upgrades applied. Checked the box for copying system files. Target drive was a 16GB DataTraveler flash drive formatted as FAT32. Creation ran to completion with no errors. When booting normally, Windows 10 runs fine with no issues. I tried re-creating the recovery drive with the same results.
I created a repair disk and tried to use bootrec to fix the issue, but I suspect it did nothing or fixed the c: drive. I ran boot rec while in the root directory on the flash drive.
Installation :: Turning Off Secure Boot / Fast Boot Required?
Apr 29, 2015As I get ready to do a clean install of 10074 I am curious about the need to disable secure boot and fast boot options. If I do disable secure boot do I need to enable legacy boot?I have had limited success with previous installs to a 2nd hard drive and the problems that arose always seem related to dual booting.
In one instance I did a clean install of 10061 and had left secure boot enabled. In order to get dual boot working I had to disable secure boot, and upon rebooting I needed to change it back to secure. I then made Win 8.1 the default boot and then Win 10 would never boot from the menu, it would just take me back to the boot menu and I could boot into Win 8.1.
Installation :: How To Temporary Boot Into Hard Disk If First Boot Option Is USB
Dec 15, 2015I'm making a image for installation of windows 10. I make a USB flash drive with WINPE. and once the device starts into WINPE, it will automatically start to install windows 10 by calling "dism /apply-image". Normally i just shutdown the computer after installation, but now i want to reboot the device and boot into the windows i just installed. But i can't, because if i reboot the device, it will boot into WINPE again and start another turn of installation of windows. How could i temporary boot into my windows 10?
View 4 RepliesInstallation :: Convert Dual Boot Install To Normal Boot
Jun 15, 2015After several weeks of testing I'm ready to go full on Windows 10 and want to get rid of Windows 7 but I have some partitioning issues I want to clean up. I currently have Windows 7 on drive 0 (360 GB) and Windows 10 on drive 1 (500 GB). Both are SATA drives and RAID is enabled in the bios but not active.
What I think I'd like to do is simply swap the drives physically so that Drive 0 has my current Windows 10 install on it and make it primary boot active etc. The drive with Windows 7 on it would become drive 1 and I would delete the Windows 7 partition and re-partition it with a clean empty partition just for extra space.
Second question, any advantage to using this drive configuration in a RAID setup?
Installation :: Can't Re-establish Master Boot Record On Boot Drive
Dec 19, 2015I have a legacy 64 bit dual core desktop (ASUS mobo). I have several Sata hard drives in it with the 4th partition of my 1 Terabyte drive containing my Windows 10 Professional boot OS. After converting another similar legacy machine to a NAS device I took the old Windows 10 32 bit OS drive from it and tried booting the ASUS machine with it. Needless to say, the OS didn't like it and reverted to Windows 10 Pro Insider Preview edition (build 11082).
When I tried to restore the boot drive to the original one for this machine the master boot was missing.
I had just formatted another partition on the same drive that had contained a Windows7 installation that had failed. This partition may have contained the master boot record. So I booted to a command prompt from a USB drive and successfully ran the following commands:
bootrec /RebuildBcdbootrec /fixMbr bootrec /fixboot bootsect /nt60 SYSbootsect /nt60 all
After that the BIOS just says "An operating system wasn't found. Try disconnecting any drives that don't contain an operating system" This disk and OS are on the original machine it used to run on. As I understand it, Windows 10 tries to record it's key to somewhere in the BIOS. But the BIOS on these old machines don't provide such a facility. I don't understand what Windows 10 OS does with the key in this instance. If it was recorded in the BIOS then I'd presume that the other Windows 10 drive I attempted to use would have found it and used it. Or perhaps not, since it didn't like the new environment.
what I'm looking for is a way to get my original Windows 10 to boot again on the same machine it had always work on before, from the 4th partition of the 1 terabyte drive I'm using.
Deleted Recovery And Boot Partitions Can No Longer Boot
Feb 2, 2016I used MicroTool partition manager to delete the extra partitions on an OS drive with win10 (leaving just the main C partition on the drive), and now the laptop will not recognize the SSD with the OS on it, and obviously cannot boot. I also tried using the bootable partition recovery tool from MicroTool, but restoring the partitions also does not work, it will only allow one of the two partitions to be restored.
View 9 RepliesChanging Boot Order With Secure Boot Enabled
Oct 27, 2015Basically, I have a really bleepty BIOS that will only let me change the boot order with secure boot disabled and legacy boot enabled. I need secure boot because I just installed windows 10 onto a new drive and it won't activate. I have heard that this has something to do with secure boot being disabled. I still have the activated drive, which is the primary drive. Is there anything I can do to change the boot order?
View 7 RepliesDisabling Fast Startup For Next Boot Can Boot From A DVD
Aug 10, 2015Control PanelAll Control Panel ItemsPower OptionsSystem Settings
Unchecking the "Turn on Fast Startup" command in the above setting path does not do it. There is supposed to be a motherboard software for enabling a normal startup the next time the computer is restarted.
No Boot Manager On Dual Boot System
Oct 9, 2015Today I installed Windows 10 on my machine (ASUS N55SF laptop) for the first time on a separate hard drive. Now I have Windows 7 on my main hard drive and Windows 10 on my new drive (the latter being an SSD one). After installing Windows 10, I got a new boot option in my BIOS called "Windows Boot Manager" which is set as default, but it runs Windows 10 directly, I can't see any boot manager (I can assure "Windows Boot Manager" behaves this way because my BIOS lets me override the boot option, so that I can directly run any boot option, and this is probably the only way I can run Windows 7 currently).
If I go to Start → Advanced system settings → Startup and Recovery → Settings, I only see Windows 10 in the "Default operating system" drop-down menu, while I only see Windows 7 if I do this while on Windows 7. It's like the two OSs are not completely aware of each other.
Installation :: USB Recovery Boot Drive Won't Boot
Feb 10, 2016I wasn't sure which forum to put this into. I created a backup image on a usb hard drive. I wanted to be able to restore it using a usb recovery thumb drive. I used the create usb recovery tool and created the recovery flash drive. When I try to boot from the flash drive I get an error saying that the boot configuration data is missing or contains errors. I can boot up the laptop using the current windows install so it isn't referring to the hard drive. I have tried several usb drives and get the same message on each. Here is a screenshot of the message.
View 9 RepliesMSConfig Boot - Can Only Boot In Safe Mode
Sep 29, 2015Over the weekend I upgraded from 8.1 (which was working perfectly) to Windows 10. Unfortunately, it had a few problems - namely that it would 'hang' at random intervals (5 minutes to 5+ hours). In an attempt to isolate what was causing this, I was advised to use Msconfig to do a clean boot.
Unfortunately, in the process, I have rendered my PC near-useless, as I accidentally ticked the box "Use original boot configuration" under Selective startup. (I know, I know. I'm so cross with myself.) As a result, I am now presented with what looks like my old boot screen - offering Windows 7, Windows 8, Windows 8.1, Windows 8.1 with Media Center, but no Windows 10.
(I originally had Windows 7 on what is now my D: drive. I ended up dual booting with this and Windows 8, but I'm pretty sure the version of 8.1 - which I've just upgraded to Windows 10 - was a clean install. It's certainly on my SSD (C: drive).)
Anyway, by using Change defaults... - Choose other options - Troubleshoot - Start-up Settings, I was at least able to bring up the screen that gives you Safe Mode as an option. This allowed me to boot into Windows 10 Safe Mode.
I went back to MSConfig and eventually found a way to deselect 'Use original boot configuration' (it was greyed out for a while). However, on restart, it still showed me the old options, i.e. no sign of Windows 10 Pro. It seems the only way I can currently boot into Windows 10 is via Safe Mode.
I've tried various things today - I tried to use Bcdedit to force it to look at the C: not D: drive, and I've tried booting with a Windows 10 DVD and using the Repair option (but partway into the repair process it starts thinking it's a Windows 8 machine again...).
I've just 'spoken' to a chap at Microsoft and he is adamant that there's no alternative (because there's no Refresh option under Settings - Update & Security - Recovery) but to reinstall Windows 8.0, and then upgrade to 8.1 and then Windows 10. As you can imagine, I really, really don't want to go down that route. But, at the moment, I can't even roll back to 8.1.
Given that I can still - sort of - boot into Windows 10, the correct MBR/BCD/whatever must still be on my C: drive somewhere, surely?
Right Out Of The Box Won't Boot
Aug 7, 2015I have to go into boot mode and then choose UEFI option in order for Windows 10 to start.
I've tried changing the setting but I'm obviously missing something.
The Boot Mode is set to Legacy: Secure Boot
Cannot Boot From SSD
Feb 9, 2016I just install a m.2 128gb sandisk ssd on my dell 7559, and I just clone my C drive into the ssd, now I have C, D and E drive. The E drive is the ssd which I want to boot from. And I cant find my ssd in the Bios setting.
View 1 RepliesISO Won't Boot From DVD
Jun 16, 2015I'm trying to install windows 10 but it gets stuck on booting screen. What I should do?
View 13 RepliesCan't Boot From CD Or DVD
Jan 19, 2016I was having bad BSOD problems yesterday, and tried to boot with an emergency boot disk so I could restore to my last good image copy. But I couldn't boot from my CD/DVD drive. Further investigation shows some confusing data that I don't know how to resolve.
When I run the Windows Disk Management utility, it shows a Disk 0 (my C: drive), Disk 1 (an external hard drive assigned to F:), and CD-ROM 0 (my DVD-ROM drive, assigned to D:.
But in Windows File Manager, under This PC, I see my C: drive, followed by CD Drive F:, followed by my External Drive G:. If I put a CD or DVD in the drive, then I see a new entry in File Manager. It adds the line DVD/RW Drive D:, but it still shows CD Drive F: as the next item. If I remove the disk then the line DVD/RW Drive D: disappears, but the line CD Drive F: remains.
With a disk in the DVD drive, if I click on F: in File Manager then it tells me to insert a disk into CD Drive F: There is no second drive to insert a disk to. If I click on D: in File Manager I see the contents of the disk.
When I go into the Device Manager, it sees the DVD/CD drive OK, but there is no other installed device that would equate to what I see as F: in File Manager.
So I think I need to have file manager eliminate the F: drive, and recognize my DVD drive as D: and my External Drive as E:
Why does File Manager list C:, F:, G: with no disk in the drive, and C:, D:, F:, G: with a disk in the drive, and how do I fix it? And what happened to E: ?
Cannot Boot From USB
Jan 5, 2016Today I installed Fatdog64 onto a usb . After I had installed it onto the device I tried to boot from the usb but it would not show up in boot manager.
View 14 RepliesCannot Get PC To Boot
Mar 12, 2016I have a PC that has Windows 10 installed on it, but when I go to switch the computer on it completes the POST and beeps one short tone.Then all I get is a flashing cursor _ and that is it, it goes no further.I have changed the motherboard battery. Could I repair the installation from a bootable USB version of W10?
View 1 RepliesNew Desktop Will Not Boot Into OS
Feb 10, 2016I just received my PC and Windows 10 will not open. After bios starts the screen says, Hi there Let's get a few basic things out of the way. Asks for home country, language, keyboard layout, and time zone, then click on NEXT. Then I have a screen that says, Get going fast, click on USE EXPRESS SETTINGS. The screen then says Just A Moment with small white balls going in a circle above. At this point the screen goes black except for the white mouse pointer. I have tried two different monitors using the VGA port, one TV using the HDMI port, all with the same results.
View 9 RepliesLaptop Will Not Boot At All Not Even From DVD
Oct 16, 2015The other day I was trying to install Ubuntu on my laptop. I searched the Internet for a guide, and it told me to use a software to create a bootable USB and let BIOS boot from it. I did that, and attempted to change it to boot USB as the first priority. After saving changes, exiting and restarting the laptop, it will not boot at all.
The exact process is as follows, when the power button is pressed:
Power button itself, 2 out of 3 LEDs beside the power button (WiFi, Caps Lock, Num Lock; only the last 2 light up), power light indicator (not sure what the exact name is, but it has a light bulb symbol above it), and the disk activity indicator all light up at once after one second. Screen also lights up (super dim) but only for around 200 miliseconds?All lights and indicators then disappear, except for power button and light bulb indicator which are still lit. Battery indicator flashes only when it is very low on power (< 7%).
Cooling fan doesn't seem to be running, and laptop gets warm after a minute until powered off.Keyboard is apparently not turned on, so spamming all kinds of keys like Del, Esc, and F hotkeys doesn't bring me to BIOS.Inserted a system repair disc (that is created in Windows 10 from a spare laptop, which is currently the one I'm using). Disc reader only spins the disc for a few seconds and stops, and laptop doesn't boot from disc. Force shutting it down and power it up again with the disc still inside still won't boot from the disc.
I've tried several other options, like draining all the power from the laptop and taking out the CMOS battery then putting it back again, but all to no avail . Operating systems installed in both laptops are Windows 10.
I changed the boot order to boot USB first, and laptop won't boot AT ALL. BIOS isn't accessible; it doesn't do anything.
Installation :: Can't Boot From USB DVD
Nov 19, 2015I just upgrade to Win 10 PRO 1511 on my Lenovo laptop and burned a win 10 pro DVD. I would like to do a clean install but I'm not able to find my DVD drive on Bios or boot manager.
View 9 RepliesInstallation :: Won't Boot After First Run
Aug 30, 2015After installing windows 10 x64 (Update and Clean) it runs for the first time. I download and install whatever updates are available, and do a restart, but windows wont boot, i get the windows logo, and the rings spining (Loading) and then black screen. Ive tried startup repair (From OS and USB), can't repair it, reset of pc, when done and the first run is about load, black screen. I was running win 8.1 before, with no problems.
Ive tried multiple times to do a clean install, and same thing, run first time, but after first reboot, black screen.
I taught it was something with my display driver, so at first run i tried download and install latest Nvidia driver for my card, and then reboot, but same thing, black screen. What can i do?
My specs:
Fujitsu Lifebook NH532 (Notebook)
Core i7 3630QM / 2.4 GHz, 8 GB RAM, 500 GB HDD, 17.3", 1920 x 1080 / Full HD, NVIDIA GeForce GT 640M LE / Intel HD Graphics 4000
Installation :: Cannot Boot From USB
Nov 20, 2015Currently, I am using Wiindows 7 Home Premium x86 with the drive in MBR partition style.
I tried to make a bootable USB of latest Windows 10 x86 ISO with Rufus in this configuration:
GPT partition Scheme for UEFI
FAT32
4096 bytes
Quick Format
Create extended label and icon files
When I try to boot from the flash drive, it just goes into a black screen, then returns to the boot menu.
I enabled both capabilities for UEFI and Legacy boot, UEFI is prioritized.
Do I have to reformat the drive first to GPT, or it's not supported?