I am using a new W10 laptop, with newly-installed software for controlling a telescope. This requires a USB-Serial adapter, which I have used successfully with W7 on an earlier machine. Now I cannot configure the COM ports. I get the message "Device (or COM Port) does not exist". I have tried setting the COM port in Device Manager to all numbers from 1 to 15, but with the same results.
View 6 RepliesI have an ssd and I want to get another to configure it in raid zero for faster pc but I have already installed windows 10 on one, is there a way I can configure it in raid zero without having to reinstall windows?
View 5 RepliesIn Windows 8.1 currently or 10 soon, is there any native functionality allowing me to use a USB key as a password to unlock the machine?
Essentially a native version of this: [URL] ......
I haven't been impressed with configuring the Start Menu so far. I would like to be able to create new groups in the Start Menu, including the fancy tiles and be able to create my own shortcuts in each group.
I looked at the tutorial All apps in Start menu - Add or Remove Items in Windows 10 but this doesn't work as described. I tried creating a group for all users and copying shortcuts to that group but some items are not shown.
I've installed Classic Shell which I've been using in Windows 8. This gives all the features I need and also still lets you use the standard Windows menu giving you the best of both worlds.
I have just recently installed Windows 10 and having great success and satisfaction with it. I was eager to get Windows Hello working but when I go to configure Sign-In options, Windows Hello is not present and I am unable to set it up.
View 1 RepliesNew desktop computer - Windows 10 Home. In System Restore, Configure, the Max Usage slider is all the way to the left.What does that mean?The hard drive is 1 TB, so I'm not concerned about how much it uses.(On my old Windows 7 desktop, I moved the slider to the right and it now saves fewer restore points.)
View 9 Replieshow can we configure Microsoft Outlook 2013 or 2016 on Windows 10 operating system?
View 4 RepliesI have made 3 attempts at upgrading my Toshiba Satellite notebook from Windows 7 home premium to windows 10. Have tried both the upgrade sent via the Microsoft message and using the media creation tool. All 3 times it stopped in configuring devices at 38%, 47% overall progress. The setuperrlog.txt is:
2015-08-01 11:36:02, Error MOUPG CInstallUI::GetDefaultLanguage(1527): Result = 0x80070002[gle=0x00000002]
2015-08-01 11:36:02, Error MOUPG CSystemHelper::CheckConnectedStandby(642): Result = 0x80070057
2015-08-01 12:34:18, Error MOUPG CSetupManager::GetDUSetupResults(4955): Result = 0x80070490
2015-08-01 12:34:19, Error MOUPG MoSetupPlatform: SetupPlatform::SetSqmDatapoint(DWORD) returned: [0x80004005]
[Code] .....
How I should try to proceed?
Update stuck on spinning wheel following download of drivers etc and after copying files. Black screen with blue logo and continuos spinning wheel.
View 9 RepliesI have noticed since upgrading to Windows 10 I am unable to Log into my work network which uses Server 2008. It keeps giving me the following error. I have added it to the compatibility mode settings but still get the same error. This is the following error I am getting " The wizard cannot configure Remote Desktop Connection settings. Make sure that the client version of Remote Desktop Protocol (RDP) 6.0 or later is installed on this computer"...
I have attatched a screen shot also.
Yesterday updated to 10586 my L930 and, as before, the Windows Camera App doesnt record audio on video shooting. I know my phone is affected by the L930 speakerphone mic problem, but until previous version of Windows Camera, audio was recorded at least in the other channels. No surround settings to manage in 10581/6. But after the last two updates, WinCamera is not recording audio. Cortana Works ok. And I cant install Lumia Camera, because it is just showing a "move to Windows Camera" message. The thing is, I already reported this through Insider Comments, but, I need to film video with audio urgently.
View 1 RepliesI don't see in the Mail App how to change the ports.
I'd need to change the SMTP port to 26 (not standard but my mail server is configured this way).
I know an e-mail client like Outlook or Thunderbird would allow it but this is not what I need at the moment.
The only option I found was SSL or no SSL, but I did not find how to pick the actual port.
Last night I have updated my laptop (Alienware mx17r3) to Win 10 Tech build 10041, updated all my drivers now my display port is not working, When booting I can see it showing BIOS and post screen but once I am in windows just goes dead with a msg no display port detected. Running my laptop screen, dell ultrasharp-u2913wm (Display port) and dell S2340L (VGA) port. On VGA both screen works fine no problem but as soon as I try running on display port dead as a doornail. I checked device manager its not even detecting the 3rd screen. Have updated latest drives from intel and ran windows update but to no avail.
View 1 RepliesSince installing windows 10 I can't use USB....
View 1 RepliesSo I bought a new monitor, the MG279Q and tried plugging it in to my PC via displayport, the monitor comes with a DP->miniDP cable, (from GTX780 DP to monitors miniDP) and the monitor gives no signal. However the computer does recognize the monitor and for example gives the sound alarm for new device attached. I can also see the device describes as "Generic pnp monitor" and I can see it in the Windows's own control panel for monitor + the nvidia control panel (pics in the end). But it won't allow me to set the monitor to use..
I suspected that the cable might be broken so I tested it with my UX32LN (GeForce 840M) laptop which has a miniDP. I plugged it to the monitor (from laptops miniDP to monitors normal DP, the monitor has both DP and mDP) and wow, image straight away. So the cable should be fine I guess.. But this is somewhat of an different situation as I use different port in the monitor compared to my desktops GTX780. And I don't have other computers or gadgets that I could use to test the monitors miniDP port.
Next I plugged in the monitor via HDMI to my desktop and that worked just fine. It recognizes the monitor without problems. Using my old XL2411Z monitor with DVI + MG279Q with DP or the MG279Q with HDMI+DP at the same time I can see the MG279Q being connected twice but it only chooses the HDMI connection and doesn't let me change it to DP even though it shows the connection.
Here are some pics to explain it better:
Multiple panel settings window. It shows the MG279Q on the top (under GTX780 the one not clicked) but it won't let me click it to use. Sometimes it lets me tick it for a second but instantly ticks the box off. The monitor nro 2 is the MG279Q via HDMI.
Surround+PhysX window shows that I've connected the monitor via DP but it is greyed out. It also won't let me make a surround set with the Xl2411z + mg279q DP.
Changing resolution settings only displays the HDMI connected monitor.
So I tried uninstalling the Nvidia drivers + freshly installing them, did not work at all. Neither did uninstalling the generic pnp monitor so the computer would reinstall the displays drivers. I also freshly installed from Win7 Pro -> Win 10 Pro and no difference (was intended to do that later on anyway so I thought that I might check, my laptop is running Win10 and it's DP worked after all). I also went to BIOS and checked that iGPU is disabled + monitor setting is set to PCIE instead of auto, no use. I would also test the GTX780's DP on other desktop computer but I can't. Anyway I'm somewhat suspecting a software/hardware compatibility issue as the monitor is being recognized. Doubt the fact that the monitors miniDP or my graphics cards DP port is broken..
What should I do or try? I really want to run the monitor via DP so I can utilize the 144Hz refresh rate.
Tech specs:
PC: P8Z68-V PRO/GEN3 (bios v3202) + i7 2700K, GTX 780 DC2 (vbios 80.80.21.00.AS04), 4x4GB 1600Mhz DDR3, AX 760 PSU, Win10 Pro
Monitor(s): MG279Q + XL2411Z
Bought a new PC with Windows 10 already installed, but have not been able to install a printer in the couple of weeks that I've had it. The print spooler will not start will not start manually or automatically when I try to get it going from the Admin account. Every attempt to install the (HP) printer software ends with Error Code 1722 (Failed to add port monitor to HP discovery port monitor). When I try to start the print spooler, I'm getting error 0x800706b9 (Not enough resources are available to complete this operation). When attempting to check Windows 10 updates, I get error 0x80080005. I'm not sure if I have an issue with my registry or what is going on with this brand new PC and Printer.
View 9 RepliesAfter the cumulative update on 30 Aug 2015 WiFi isn't working... Even if I connect to Ethernet port it is not recognising. What to do
View 5 RepliesLenovo USB port replicator to work with a DVI monitor attached? I can't get win 10 to recognize that another monitor is attached.
View 1 RepliesOk so I have a wireless Bluetooth device. It has worked fine connected to a windows 7 and 8 computer. Now I am trying it on 10. For the software I wrote for it to work properly I need to be able to specify which COM port it uses when connecting.
In windows 7 and 8 I would then go to "Bluetooth settings", click "New Connection", and then follow the setup wizard. Here I would be able to set the device to be in Dev mode and specify the COM port to always use. In the new windows 10 "Bluetooth settings" program I can not find a way to do this.
Also I have two different "Bluetooth settings" programs show up in the start menu. One I can open up and it will show my device, but I am unable to do what I mentioned above. The other program with this name has the same icon as what is on my Windows 7 and 8 machines, but gives me the error "unable to start correctly (0xc000007b)"
I'm using a current Intel NUC (NUC5i3RYH) running Windows 10 Home x64.
I have this infuriating problem which may be related to the hardware but may also possibly be fixed in the OS. I've had no success so far changing power and sleep settings in the BIOS and Device Manager. I've had no luck with Intel directly.
The symptom is that any (of two different) USB TV tuners I use seems to lose the quality of signal anything from 20 minutes to an hour after I access that channel. If I change channel and then return straight back it instantly fixes it.
any registry or other settings I could try? Alternatively some utility or task I could use to poll or wakeup the port periodically? I'm just lost on this and have spent over a month off and on trying to work out ways of making it work.
when i connect a dvi or hdmi from my gtx 780 to my acer H274HL Monitor all works fine but when i want to connect display port cable on my gtx 780 and the other side is hdmi that goes to my monitor than there is no signal at all.
i am running windows 10 64 bit enterprise and all drivers are up to date also windows updates are up to date.
I have some home automation software (HomeSeer) running on a W10 machine on my network that has a web interface running on port 8080. I want to access this from other machines on the network. I couldn't access it by default so I created an inbound rule on Windows Firewall for TCP port 8080. But it still won't connect from other machines on the network. I know the problem is on the host W10 machine because when I temporarily turn off the firewall on that machine I can access the web interface from the other machines. For the rule I tried private only, and private+public+domain, and same result.
View 5 RepliesI just wanted to ask if it was bad that i had my HDD connected to a eSATA (Asmedia) port when installing my OS? I just tried switching the port from the eSATA ports to the regular SATA ports but it gives me BSOD saying "Inaccesible_Boot_Device". So i just plugged them back in eSATA ports.
View 1 RepliesHow to use power from USB port while it goes to standby/suspend mode. When I go to device manager- USB root hub- right click - properties -power management tab, the option "allow this device to wake computer" is inactive. But "allow this computer to turn off this device to save power" is active and unticked.
View 2 RepliesJust unboxed my computer from CyberpowerPC, GTX 720 graphics card, installed/updated all drivers with drivereasy (paid for just now) and I am still having the issue with HDMI port not working. I have tried to plug into a monitor and a TV, neither are working, I have also tried to use multiple HDMI cables, still does not work. My monitor has an auto-switch source availability and turned on, when I plug my computer into the monitor with HDMI it continually cycles, finds no signal and goes into sleep mode. Then rinse/repeats until I either turn off the computer, monitor or just unplug the monitor from the computer. Currently I am using a DVI(computer) to HDMI (tv) and its working fine. So I know its the port on the computer. Do I need to contact CyberpowerPC to send the computer back to get this issue resolved?
View 7 Repliesafter upgrading to the windows 10 OS, I could not get my HDMI port to work. It does not get recognized at all and is very frustrating. I run the OS on my laptop which is a HP Pavilion. I really need it to be working. I love windows 10 but this is a big problem.
View 1 Replies