Having recently upgraded to Windows 10 from Windows 7 I have tried to create a recovery drive to go on a USB flash drive. All I get, however, is the message " We can't create the recovery drive. A problem occurred while creating the recovery drive". I have tried a few times without success.
I looked at the Event Log and saw the following which, I believe, is related to the problem: Microsoft-Windows-CAP12. I.D.513.
I need to create a windows 10 PRO ISO on a flash drive to do an upgrade. They already have Windows 8.1 PRO so they need to upgrade to the windows 10 PRO version.
On the windows media creation tool, I only get an option for windows 10, not any other version of it. Where can i find the official ISO file for it.
Bought and tried two 64 gig flash drives to create image backup. First told they were not NTFS format. Did that. Now both come up as an invalid backup location, although image should take only 48 gig. Have seen other queries with same problem but no answers. Do not want to use laptop more until I have a system recovery method.
View 2 RepliesI recently used a 16GB USB flash drive to create an installer for a new Linux distro. I noticed that the created partition is 8GB and the rest 8GB is unused. I want to create a second NTFS partition so I can use the USB as a recording medium for my PVR, but Disk Management doesn't give me this option. I then used MiniTool Partition Wizard Home Edition, which did create the partition but warned that it won't be recognized by Windows as it normally sees only the first partition on a USB Flash drive. I even went back to Disk Management and assigned a drive letter to the second partition, but in Explorer I see only the EFI partition (first, drive is formatted in GPT mode) with that drive letter. Is there any workaround? Of course I could just format the whole drive as NTFS, but I wouldn't like to do so until I don't need the installer anymore.
View 9 RepliesHere is the issue I am currently at:
I have a Surface Pro 4 that I want to set up a Dual Boot on. I normally wouldn't have too much of an issue resolving this on my own, but due to the Surface Pro 4 not supporting Legacy flash drives, my standard way (Booting into a MBR Flash Drive w/ an Offline OS on it and doing the defrag/moving the files to the beginning of the drive) of solving this issue has left me baffled. I've attempted downloading Rufus and utilizing a MBR ISO (Which failed, since it didn't have the EFI boot sector on it), going back and forth amongst various methods of removing secure boot (which was a doozy at first, after having to go through recovering my BitLocker key) in order to boot from legacy, all to no avail.
Basically, I want to take my SSD, and move all the files to the beginning, which I can't do in Windows due to system files being in use (Ironically, a large portion being near the end of the drive). All I am looking for is a method to create a bootable UEFI flash drive that I can use to defrag/do this from. I've dug a little bit around on Linux and didn't find anything that seemed to be able to do it, as most options seemed only relevant to Windows PCs. Is there any options available to do this? Or would formatting and reinstalling it be the only option?
I'm running Win 10 Version 1211 (build 10586.11) - i.e. the latest build with the latest update.
I want to create a new recovery drive but when I get to the window that says "Connect a USB Flash Drive" and the process comes to a dead stop.
-I'm using the same 16GB thumb drive that was previously used to create a Win 8.1 recovery drive so it should be good
-The thumb drive appears in File Explorer and I can read and write to the drive so the system sees it
I should also mention...
-I have attempted this with and without "include system files" checked.
-I find it interesting that after a thumb drive is inserted, I don't have the icon in my system tray that I would normally select to eject the thumb drive.
Nonetheless, I can read and write to the thumb drive. I've inserted the same thumb drives in another computer with Win 10 build 10240 and I get the USB eject icon on my system tray
I am trying to create a system recovery drive on a usb stick using Create a recovery drive in Settings section.
But apparently I am missing many files such as winre.wim and install.wim as I keep getting error messages that I am missing files and instead am told to insert my Windows Installation dvd to get them. Since I have a Win10 Upgrade install from Win 7 Home Basic, I have no dvd install disk to either copy those files from or use as a rescue dvd, and I looked back at Win 7 files on another drive, and the .wim files are not in 7 either, as that was a Dell reinstall dvd (still have that), but no such files there either.
So can I get Mr. Gates home # in case I need to rescue my OS? My past behavior tells me I WILL need to rescue my pc sooner or later, & maybe this time I can be prepared.
So my sister's Windows 8.1 laptop's hard drive is broken... with her OS on it. I'm getting her a new hard drive (internal) which I will fit, but it seems pointless to buy windows all over again when she still owns it. I was thinking I could create a recovery drive from my pc (Win10) and install it on her new hard drive when it's fitted.
View 8 RepliesWhen I attempt to create a recovery drive, I get this message.
Recovery Drive
We can't create recovery drive
A problem occurred while creating a recovery drive.
What is the answer, as I have tried this several times.
It has been suggested that I should create a Recovery Drive from USB to enable me to reboot if I get problems.
However when I use "Recovery Drive" I get the following message "We cant create a Recovery Drive on this PC. Some files are missing.
To Troubleshoot when your PC cant start use your Windows installation disc or media" . As I upgraded from Windows 8.1 I don't have a disc & what is media?
So I've completed the upgrade from 8.1 pro to Windows 10 pro. I want to do a clean install so I went to control panel to create a recovery drive. After clicking next through the first screen it appears to search for eligible drives to backup to (I'm just assuming here, and I do have a 32GB USB drive plugged in), then just gives up and says it can't do it. No explanation of what went wrong. So I guess no clean install for me..
View 6 RepliesWhile trying to create a recovery dish I get message that an error occurred and unable to create a recovery disk. If I uncheck backup system files to recovery drive it,creates the drive. Not having the system files will I still be able to use it to boot my pc if I need to. Originally Windows 7.
HP Pavilion p2 PC
Intel Pentium Processor G62OT
I have a handful of questions and issues with "Create Recovery Drive"
1. How dose Windows 10 Recovery disk work? When I first tried to create a recovery drive, it specifies the drive size I would need. One said I would need a USB that would take up to 8GB, the other specifies 16Gb. Since USB drives come in it's denominations of 4,8,16,32,64,...., I got 16GB and 32GB respectively.
2. Does Recovery USB Drives need to be recreated once in a while as an update since system files are added to the USB?
I have three Windows 10 PCs I need to create Recovery Drives on each of them with system files inclusive.
3. New Del Desktop, arrived with Windows 10 (64Bit). It asks for a USB that would take 16GB, I inserted 32GB but it created a recovery drive that is 8+GB only. Why? I wish it would have asked for 16Gb so I don't have to spend to get the 32Gb USB. By the way, when I inserted a 16GB USB, it would not continue.
4. Dell notebook XPS, upgraded from Windows 7 (32Bit) to Windows 10 (32Bit). When I tried to create a Recovery USB drive, it asks for 16Gb USB. When I continued, it stalled at a windows that would not highlight the "NEXT" button. This button is grayed, so I cannot create a Recovery USB.
5. Third PC is a HP desktop I upgraded from Window 7 (64Bit) to Windows 10 (64Bit). The Create Recovery USB with system files did not work. When I started the recovery, it just kept chunning and chunning for a very long time and will not stop.
I originally purchased Windows 8 and upgraded to 8.1. I installed the Windows 10 upgrade via the downloadable Windows 10 Installation Tool and burning the ISO to a DVD. I understand that this will work to upgrade my system should I need to recover but will this still work after the 1 year free upgrade period? Also, how to confirm if the ISO downloaded via the Installation Tool will work as a repair disk to recover using a system image? If that's the case I would be content with that, as it's how I've always done backups since Windows 7.
View 6 RepliesI recently purchased a new Windows 10 laptop (HP), which I presumed is a 'clean install' and I'm mooching around looking into how to create a recovery disk. Anyway, when I go into control panel, underneath System and Security I see a link that says; Back up and Restore (Windows 7).I'm wondering why there's a reference to Windows 7 on my Windows 10 device?
View 6 RepliesI upgraded to Win 10 Pro. I created a boot disc, repair disc. Now, I'd like to be able to recover from a system crash. How do do I create a recovery disc with the win system on it?
View 4 RepliesI created ISO disks for both my 32 bit and 64 bit systems at the MS download site. If I use the ISO disk instead of the Windows Update method, does the install still create the W7 image in case I want to go back to W7 after installing W10?
Also, do I boot from the disk or do I go into the ISO disk and click on Setup?
have a new dell inspiron 15-55580 with win 10 installed at factory. unable to create a recovery media drive using usb drive (16 or 32 GB). receive error message: a problem occurred while creating recovery drive."
View 1 RepliesIf so, I don't have one... I look in Drive management and SSD is all one partition, I assume 232gb is what a 250gb ssd looks like formatted. Is that going to be a problem if I ever run reset or does windows hide all those files somewhere else?
I know I had one before on my old install but it was an update from win 7.
Is it possible to create a recovery partition or image on a PC, which could recover the PC using a Fn key during boot up ?
I have a PC with a recovery partition which is for vista, which is now obsolete now Imhave moved up to Windows 10 via Windows 7.... never want to recover to vista...
would love over to create my own recovery partition, where pressing e.g. Fn11 during startup invokes the recovery process.....maybe this is too difficult...there is a program called AOMEI OneKey Recovery which promises to do such, or so it looks...
I have a custom built dual boot Win 7 64 bit OS. I got notified about upgrade availability and upgraded successfully with a minor glitch. (The monitor display went off with frequency mismatch. While I was searching the machine restarted automatically and voilla win 10 was up). It did few more restarts and I configured Kaspersky also to work. Overall it was working fine and restarts after enabling Kaspersky was successful.
However for the first time, I did shut down and system never came up. Its stuck in a grey screen of spinning wheel (GSOD? Grey Screen of Death).
Unfortunately I didnt create a recovery disk and now I can't do any action.
What I have tried
a. CTRL+ALT+DEL button works only once.. It shows 3 icons, wifi connectivity (connected to my network), accessibility option and restart option.
I have tried Shift + Restart - but no luck in bringing Safe mode..
So the only option for me is to either shut/ sleep or restart. I have tried all 3 - but always comes back to GSOD
b. Starting in Go Safe mode - I have read "tutorial" on Win 10 Go Safe mode.. None of the different options work for me as I can't see any display. I have tried using Shift + Restart but no difference.
c. I found other option is to have recovery disk. Unfortunately I didn't create one. I have seen the tutorial on "recovery drive".
What can I do?
a. Should i download win 10 ISO and try to boot?
b. Can I create a recovery disk from Win 10 preview PC ( 64 bit - from a friends pc)
What size usb drive do I need to create windows 10 recovery disk....
View 1 RepliesUsing Windows ADK 10 v1511, how do I create a CD of the Windows PE latest version for the imaging, recovery and system maintenance?
View 6 RepliesHow do you get videos to a flash drive?
View 6 RepliesI'm interested in the W10 free upgrade from a usb ISO image. I now have W7.
A couple of questions concerning the W10 installation from a bootable usb ISO image - will the hard drive require prior repartitioning, and what do I do when the install process asks for the license key ? AS I recall, installing W7 without a key only allowed 30 days of use.
In Windows 10, I insert the flash drive and the File Explorer window opens. I then double click on a file to open it's supporting app. I close both the File Explorer window and the app and eject the drive. The first eject results in a "device is currently in use" message. The second click displays the "Safe to remove" message.
If I don't open the app and just close the File Explorer window, the first eject attempt is successful.
In Win 7, I could eject the drive without closing the Windows Explorer window or the app. Ejecting the drive would close the Windows Explorer window and leave the app open, displaying the "Safe to remove" message. The file would remain in memory to be read. But an attempt to save it would fail.