Cannot Detect Ethernet Cable
Aug 18, 2015i just built my pc and installed a fresh windows 10, i tried to connect ethernet cable to my pc but win 10 still cant detect the cable.
View 1 Replies
Similar Messages:
Ethernet Keeps Disconnecting And Always Can't Detect Cable
Jul 31, 2015My acer notebook after upgrade from win8.1 to win10, my ethernet port keep disconnected and sometimes cant detect cable till i restart ny notebook. reinstall driver still same..
View 1 RepliesComputer Won't Connect Through Ethernet Cable
Mar 16, 2016A couple days ago I noticed that instead of having the ethernet in my taskbar that it is connected to wifi. I dont understand that because I have been using hardwire forever. To top it off my xbox connects via ethernet, but my pc wont. have tried the same cable that connects my xbox. I am pretty sure this is causing serious game lag, and i dont know what to do at this point. i cant access my router settings either. i type 192.168.1.1 and it doesnt load. that is the same ip address that i have always used before.
So this solution did work in a sense. Once reinstalled my drivers, my computer did detect that there was a ethernet plugged in, but it said the there was no connection. I disabled wifi on the computer, so it can only connect to ethernet. even tho it says that there is not internet connection through ethernet, everything is working great. It permanently has the Caution symbol over my internet.
No Ethernet Cable Installed Or Connected
Oct 4, 2015My problem is i use a hardline into my computer and upon starting it up yesterday was greeted with the problem “no ethernet cable installed or connected”. I have replaced the cable already/restarted both the computer and router multiple times/did a system restore and none of those worked. Also disabled and re enabled the adapter multiple times.
The only thing that seemed to work or hint at the problem was a windows 8 forum that said to use an elevated command prompt to do “sfc/scannow” and that came back with errors. There was a “DSIM” command that was unable to find a correct download location.
Ethernet Not Working / Network Cable Unplugged
Oct 24, 2015The other day I was connected to the internet via Ethernet cable I bought around 3 weeks ago and it was working well with no problems, but for the past two days when I plug in my ethernet cable, my laptop doesn't detect it and it says "Network cable unplugged".
View 1 RepliesNetworking :: Ethernet Cable Doesn't Have Valid IP Configuration?
Feb 10, 2016Where to start so to begin with my issues started when we got a new router. We had issues with the old one so we installed a new router and got it working fine WiFi worked alright but Ethernet would not connect it my computer when I ran the troubleshooter said one or more network Protocols were missing from my computer I'm running windows 10 version 1511. I went on google on my laptop to start finding a fix and I must have tried every option in the book just about I am losing my mind over how to fix this. Finally I tried reinstalling the Network drive Uninstalling my current one going on google finding my most updated one ect. and now the issue is no longer about the protocols but its saying my Ethernet doesn't have a valid IP configuration
View 2 RepliesNetworking :: Ethernet Cable Suddenly Said Unplugged While Surfing
Sep 18, 20152 days ago, I was happily enjoying my internet when suddenly my internet stopped working, I checked it and it showed that the ethernet cable is unplugged. I have by now, tried reinstalling win 10 (lost all my files and drivers ) and few more things like automatically searching for updates online. I have a realtek family controller
View 1 RepliesBSOD :: Boot Loops When Ethernet Cable Is Unplugged
Sep 21, 2015Win 10 32 bit will only load properly with Ethernet cable. Discovered this looping issue when I moved the PC and went to use Wi-Fi. Plug cable back in and everything goes back to normal. Troubleshooter doesn't find anything wrong.
View 8 RepliesNetworking :: Unable To Do Ethernet Direct Cable Connect - Homeuser
Nov 12, 2015I have been unable to do a direct cable connect. Settings are not available. In settings, to do a cable connect it asks for a name and ISP. There isn't any. I never had a problem doing this before and I can do it with my apple computer. It has now been 2 days trying to figure out how to do what should be the easiest connection. No problem with any wireless----not everyone has wireless! Your microsoft stores have a long way to go to match the apple stores. If you can't get a connection to the internet it is very difficult to communicate or download any patches.
View 6 RepliesComputer Won't Connect To Internet Via Ethernet Cable Through Wall Output
Aug 16, 2015My computer wont connect to the internet via ethernet cable. It works when the cable is directly connected to the modem, but when I run the cable into the wall output it wont connect. Ive tested that there actually is internet through the cable in the wall by connecting it to my Macbook, and it works perfectly. what can I do to fix this?
View 1 RepliesNo Network - Cable Is Unplugged
Jul 30, 2015I upgraded to windows 10 yesterday from windows 7. I noticed that my network isn't working. It says that cable is unplugged but my cable is fine. I tried different cables but s still the same problem . My internet worked fine yesterday( in my windows 7) . My drivers are up to date. My wifi works fine only internet isn't working. When I press troubleshot it says that cable is unplugged or your broadcom netxtreme gigbait adapter have problem with hardware or driver.
View 1 RepliesComputer Won't Connect To Internet Via Cable
Oct 14, 2015So I've built my first ever PC and I chose the ASUS Z170-A as motherboard. When I was finished I installed Ubuntu. The ASUS motherboard do not have wifi compatibility integrated so I used the ethernet cable to connect to internet. That worked just fine, everything worked very smoothly. Then I decided to install Windows 10 instead. I bought the Windows 10 Pro, wiped out all the Ubuntu reserved partitions on the SSD disk, and install Windows.
But now, while having the ethernet cable inserted to the motherboard, it wont recognize it. The green and orange lights next to the ethernet cable input are even turned on (indicating that the PC does have a connection). But still the OS wont recognize that it is there. So even when Ubuntu succeeded to recognize the cable, Windows 10 din not. I speculated that I need some kind of software to detect the cable, but I am probably wrong.
Installation :: No Audio After Upgrade Using HDMI Cable
Jul 29, 2015Per the title, I run my computer through my TV using an HDMI cable. Sound works brilliantly on Windows 8.1 but after upgrading to Windows 10, I'm left without audio, and in the sound settings it doesn't show HDMI as an available device.
View 2 RepliesWhy Does (Cable Modem) Access Just Stop Randomly
Aug 31, 2015I'm sure there's enough variables that this could be some combo of software and stuff I have (I never use OneDrive - close it? I use Dashlane - it had Win10 issues, later resolved.) -- but does anyone walk away from their PC, come back and find online (cable modem/Ethernet in my case) - just stops working, in everything? Evernote, Firefox, Outlook, etc.?) Programs are fine (well, Outlook freezes in mid send/receive but...) but the online access is gone? And the only fix usually is a reboot?
Never happened in Win 8.1. Happens about once a day in Win10. Reboot fixes. Network troubleshooter finds nothing. If it didn't come back after reboot I'd be desperate, as it is ... I can live with it if I have to but... was hoping one of these "cumulative updates" would work but... doesn't seem to happen when I'm working, only if I stop a bit. Got a clue that doesn't involve powershell "fun" or registry/deep file mucking?
Drivers/Hardware :: Won't Play MP3 If There Is HDMI Cable Connected
Dec 10, 2015Windows 10 plays Mp3 Files just fine. Connect an HDMI cable to the video output port, and then windows 10 suddenly wont play those files. An error message pops us inside windows media player and Grove that this file type is not supported. Also no sound is played through the HDMI Cable to my TV, and no sound is played when i click the volume bar on the bottom right side.
I work for an integration company. We just installed a couple of conference rooms for a company in which we have an HDMI cable running from the table through the floor in the walls and to the TV. From there it breaks out into the Amplifier and plays audio in the room. Normally i bring my Mac book pro for testing but i purchased this Windows 10 computer as a test device. I did not have a second laptop with me to test this out.
However, With the computer and the HDMI cable i am getting video to the TV. When i enter my TV menu and arrow around the menu option my sound works on the built in speakers in the room. So i can confirm that the cabling is all correct. This is the identical setup that we always use. I have also plugged my Iphone into the cabling behind the TV and played music which worked perfectly fine.
The computer, as i mentioned, would play MP3 files perfectly fine, untill i plugged in the HDMI cable. Infact i can be playing and MP3 file and then plug in the hdmi cable and suddenly the computer stops playing the MP3 file and gives me the error that windows can not support this file type. Those same MP3's play on an SDCard in the TV when i access them directly from the tv. So those files are not bad. Also anything with audio fails to play anywhere (tv or locally on the laptop) when the HDMI is plugged in.
Also i have gone to the control panel and selected the Audio section and looked at the video card / audio output selections. When i have no HDMI cable selected the option for audio output changes to the internal sound card. (which is correct) and then i plug in the HDMI Cable and the audio switches to the HDMI output (which is correct)
the only two conclusions i can come up with are this particular computer has a bad video card. or windows 10 is not supporting audio output. I have never tested our setups with windows 10 before.
Last bit i'll include this is a brand new computer. Core i5 8Gb ram 1tb hard drive. its a toshiba.
After Using HDMI Cable Screen Is Blurry And Icons Are Huge
Oct 28, 2015I have a laptop. Acer e5-571g to be precise. So, i had a problem with an hdmi cable to tv - had no sound. Did a bit of research, tried some things out, nothing. Unplugged the cable and my screen icons went large, screen is blurry now. Drivers, i think, are up to date. Screen resolution is not the problem, icons are set to small. Restarted the computer too. Oh, and i have windows 10.
View 1 RepliesHDMI Cable Is Not Working On Asus Notebook After Update
Aug 30, 2015My HDMI Cable is not working on my Asus Notebook after I did the Windows 10 update. I have tried fixing the sound and resolution on control panel, i also made sure all updates and installation of apps are up to date, however, the TV doesn't seem to recognize the cable anymore, or the computer.
Tried changing the settings on the TV as suggested on one of these forums. I must be missing something.
Pro Won't Detect Hard Drive
Oct 30, 2015I have an HP G42-154CA that I'm trying to get Windows 10 Pro installed on.
[URL]
I ran into an issue with the installation disc not detecting the hard drive (ie, no hard drive is listed when the screen appears to select the hard drive to install Windows on).
I've tried various drivers (latest from HP and Intel website, OEM OS installation discs etc) with no luck.. at the very least, the Windows 7 driver from HP's website for that laptop should work for installing Windows 7- same results, does not detect hard drive.
At this point I'm wondering if maybe it's a BIOS setting that's causing this? I don't recall changing anything in the BIOS when I last installed Windows (which was v8), but it was awhile ago, so can't be certain.
Windows Does Not Detect HDD During Install
Apr 25, 2015Instead of doing an upgrade of Windows in place, I am trying to do a install from the ISO using EasyBCD.The ISO launches fine as the setup starts but Windows refuses to see my HDD.I have an Elitebook 9470 laptop.
It uses the Intel storage drivers for AHCI and the HDD itself (Intel SSD)Bios is set to use UEFI Hybrid (With CSM).
BIOS can not use UEFI (without CSM) mode as the system does not boot.Tested using Legacy mode and still unable to see HDD. BIOS version is F60 (Jan 2015) and is the latest.
Networking :: LAN Gigabit Always Detect 100 Mbps?
Oct 18, 2015i have pc with GE port n using cat5e cable but when im conected to modem huawei HG8245 its only detect 100mbps when im try manual set to 1.0gbps lan network say unplug.
View 9 RepliesDrivers/Hardware :: PC Won't Detect Headphones
Jan 14, 2016I have tried both front and rear inputs and still no success. My PC won't recognize my headphones being plugged in. They're headphones with a USB and 2 jacks (speakers and mic), and when plugged in the green light is active on the headphones showing their working/have power. Changing the connector to a solo jack, I can plug it into my PS4 / iPhone and it works fine. However on my PC it doesn't work, despite it working completely fine for 2 weeks until 2 days ago.
I've tried going to device manager and updating drivers, and I've also tried managing audio settings and making it my default device but the PC is not picking up the headphones exist, even after ticking Show Disabled Devices. In device managers, the headphones aren't under "Sound, video and game controllers", "Audio inputs and outputs", or "Unknown Devices" (as I have no Unknown Devices menu). I do not have RealTek Audio Manager. These are the solutions that worked for most people but not myself.
The events that led to this error was last night I was trying to watch a film but my TV (which is my monitor) speakers weren't working. After updating sound drivers and realising they were for some reason disabled, I re-enabled them and they worked fine. However, disabling them again does not fix the problem. The PC does not pick up the headphones at all, mic or sound. I do believe that it is an issue with the newest drivers I installed after upgrading to Windows 10 three days ago. The headphones worked fine on Windows 10, but I believe the issue is with the new drivers I installed to make my TV speakers work.
Slow To Detect USB Connected Devices
Aug 5, 2015Windows 10 is very slow to detect all USB devices I connect to it, whereas Windows 8.1 was nearly instant.
Since upgrading, it takes about a minute for Windows to realize that I have connected a device to it.
Can't Find Any Way To Make Virtualbox Detect USB
Aug 1, 2015I've just downloaded Windows 10 from their official website to my USB, and I didn't choose an .ISO file, I did choose a setup (USB option).
The problem is that I want to prove it via VirtualBox but I can't find any way to make virtualbox detect my usb (also tried with plop boot manager).
AiO Will Not Detect Laptop Screen Via HDMI
Nov 30, 2015I have a new all in one desktop. I want to use the monitor as an extenal screen for my laptop. I connect the hmdi lead from the laptop to the AiO hdmi input socket. The laptop 'sees' the external monitor (Fn and F5 tells me this) but the monitor will not detect the laptop.
View 1 RepliesAutomatically Detect And Install Driver
Sep 2, 2015I have a Toshiba Sattelite C75D-B Laptop that I did a clean Windows 10 install on, after upgrade. Should I need to install a graphics driver? Or would the Windows 10 Media Creation tool disk I burned have installed the proper one?
If not, I have always used nvidia on my homebuilt systems, but this laptop has a AMD A6 sticker on the top. So does it use AMD Radeon Graphics?
If so, can I use the "Automatically Detect and Install Your Driver" function on the AMD site?
Drivers/Hardware :: Connected USB Cable - No Action - Not Visible In Device Manager
Nov 23, 2015I got a problem with USB cable. When I plug it in there is no action from system side. It should at least give me a message like"Unknown Device" but there is NO such message. I don't see it also in device manager...
I've checked same cable on different laptop (Windows 7) and it shows as "Unknown Device".
Scan for hardware changes also dont work for it...
- how to debug it? I've tried Microsoft and Intel drivers but with no luck
I am using Windows 10 - Intel 6 Series / C200 Series Chipset Family USB Enhanced Host Controller - 1C2D & 1C26 USB Drivers