Okay so here's what happened. I had made a new user on win10 and gave it admin rights. I then booted my pc in safemode to fix an unrelated problem and when I went to log into the account, the password I had given it did not work. I do not have a windows 10 disk to reset my password as I upgraded internally from 8 to 10. all I need to do is get out of safe mode.
View 3 Replies
Needed to boot in safe mode, used msconfig to set the boot mode. Of course I was not aware my pen number login is wothless so now I am stuck in perpetual safe login screen. My outlook password is in a program on the system which I cannot access.
Tried shift restart and tried startup settings and press enter, but this does not do a normal boot, just another safe mode. Where is the option for normal boot!?
I reset my boot using a command prompt, so that it would next boot into safe mode.
However at the flash screen which requests my PIN, it now says my PIN is incorrect and so I cannot complete the boot at all, either in safe mode or otherwise!
I was hoping to use safe mode to investigate why Devices and Printers hangs without reaching any display - but now I am completely locked out of the computer.
It is a 3.6GB desktop running Win 10. I have just previously run scannow to check that system files are OK, and found no discrepancies.
After an update to Windows 10 I started getting "invalid register key" errors with every open. I restored a previous registry value prior to the last update and still go the error. Instructed to boot up in safe mode but as I logon using my microsoft account, safe mode does not open wifi connection and the password cannot be verified. At least I think that is what is happening as I reset my microsoft account password using another computer and it is still refusing the password on the windows 10 machine.Is there anyway around the password request and get the computer to boot up in regular mode?
View 1 RepliesMost of the time we need to boot in safe mode with Networking to fix some of the issues. In some of the windows 10 computers wireless not working in safe mode with Networking
For an example my dell 5547. Has a wireless card, Intel Ac-3160 works fine in normal mode, But in safe mode it refuses to detect any Network, I am seeing similar behavior in some other models too in windows 10
Wired Networking (ethernet) is working.
My windows 2003 server stopped working in normal mode, but working in "safe mode with networking" and giving reply from all peers, and reaching all remote locations. in Normal mode not even ping to peer and giving error "destination host unreachable". tried with new NIC. IP conflict coming when assigning used IP address, if giving a new IP address not even request going to peer showing the same error as "destination host un reachble".
View 1 RepliesDue to there not being an F8 boot command screen any more I had to go into msconfig to change how the computer starts up.. which is now set to safe mode. So I'm in safe mode (on the other computer).. the problem is I cannot figure out how to reset it to start up in normal mode. The 'search windows' box at the bottom will not allow any text to be entered.. unless I can get to msconfig by looking for it in safe mode.. I'm stuck in safe mode. How to get to msconfig in safe mode without typing it in? again the msconfig was changed to have the computer start up in safe mode.. it's now doing it every time.. even after a system restore to 4 days ago.
View 2 RepliesI put my PC in safe mode but when I try to get out I can't I press the windows key and the R and then put msconfig. A window opens but it closes right after.
View 6 RepliesI have a MSI board and cant seem to find how to run windows 10 in safe mode
View 1 RepliesI knew better but with the constant nagging for me to update...I accepted the update. This is where the problems started. My HP dv7 took the update and now only shows a sun burst and blue like screen...mouse works but will not do anything else...tried to boot in safe mode but nothing doing there either...... how to just get back to my win 7 home pre.
View 2 RepliesI was having difficulty with flashing and went into safe mode to try to figure out which program was causing it but now whenever I reboot I am still in Safe Mode.
View 8 Replieshow it did not work on windows 10 using f8 key..I like knowing if I need to get into safe mode on my pc the f8 key will work... So I started checking the web and found how to make windows 10 go into safe mode with f8 key...The information I found is for windows 8 but I checked it out on my windows 10 pc and it works just fine... How to enable the F8 key to start Safe Mode in Windows 8.Admin...If this is information you all know about just delete this post...
View 6 RepliesI'm using Windows 8.1 and know how to get into safe mode on that operating system.
However, my friend has Windows 10 Home Edition and I've never had exposure to it in the past.
How does one get into Safe Mode?
Also, how can you get the toolbar back on the page as like Windows 7 and Windows 8.1?
In Windows 8.1 it was very simple and straight forward, but Windows 10, different ball game all together.
I work in an education environment and these kids are very savvy. They have figured out how to put the computer in Safe Mode and make it impossible for me to track them. how to Disable Safe Mode?
View 5 RepliesI want to boot into safe mode but every time I try it crashes and shows BSOD Bad_Pool_Header. I've tried to boot it manually through system config. It still won't work.
View 1 RepliesMy laptop was windows 7 and I have upgraded to windows 10. Over the past few weeks i've seen that some updates have failed, and I was going to try the product on this site , windows all in one, to try and find out the problem. so i followed the instructions for powering off, unplugging and removing battery to drain electricity, and then rebooted to "safe" level...and then.....i can't login from safe mode, it says password is incorrect, and i am unable to get OUT of safe level to sign in the regular way.
View 4 RepliesSo, to log into your computer you have now to enter a PIN instead of a password, right? Well, that PIN is changed (or something similar) because I can't log in with the normal one.
View 7 RepliesLong story short, W10 doesn't support my built in Intel video chip and there is no driver and W10 wont let me load Windows Basic Video driver so I need to go back to W7. I can only get into Safe Mode so I don't see how to do the reversal. Windows.old exists. How do I get the computer to revert from Safe Mode?
View 8 RepliesI have just upgraded my PC from Windows 8 to Windows 10.
My antivirus software needed to restart and boot in to Safe Mode.
But, for years I have used the 4 digit pin login from Win 8,but I cannot remember the normal password.
Safe Mode ony allows login via the normal password and not the pin, so I nol longer have accessto my PC.
How can I get the PC to start in normal mode.
I do not have any install or recovery media.
Through msconfig I added safe boot with networking, however when I restart with F8 networking does not boot up. Took a while to even find how to get that far and then it didn't work right.
View 3 RepliesI can boot up my PC but then anything I do results in non responding screens so cant get into safe mode from there.
Anything involving restart caudse hanging on 'restarting'
Is there another way?
My computer will not go to sleep at all unless it is in safe mode without networking (the monitor does sleep then). When I boot it into safe mode with networking, it will not go to sleep (the monitor will not sleep). When I boot normally into Windows 10 (clean install; up-to-date as of today with Windows Update), the computer does not sleep.
Also, sometimes before when I login after a normal startup, the computer does go to sleep; however, nothing displays on the monitor after I press the power button to bring it out of sleep. I tried disabling the "wake" feature for the network adapter (as suggested in another thread), but that did not work at all. My computer's specifications are:
Operating System Windows 10 Home 64-bit
CPU Intel Core i7 2600K @ 3.40GHz Sandy Bridge 32nm Technology
RAM 8.00GB Dual-Channel DDR3 @ 665MHz (9-9-9-24)
Motherboard Gigabyte Technology Co., Ltd. H67M-D2-B3 (Socket 1155)
Graphics ASUS VS239 (1920x1080@60Hz) / 2047MB NVIDIA GeForce GTX 660 (PNY)
Storage 465GB Seagate ST3500418AS ATA Device (SATA) / 298GB Western Digital WD My Passport 0748 USB Device (USB (SATA))
Optical Drives ATAPI iHAS424 Y ATA Device / HL-DT-ST BD-RE UH12LS28 ATA Device
Audio NVIDIA High Definition Audio
I have just upgraded my PC from Windows 8 to Windows 10.
My antivirus software needed to restart and boot in to Safe Mode.
But, for years I have used the 4 digit pin login from Win 8,but I cannot remember the normal password.
Safe Mode only allows login via the normal password and not the pin, so I nol longer have accessto my PC.
How can I get the PC to start in normal mode.
I do not have any install or recovery media.
I am having a hard time trying to get back to normal mode. My external monitor vga driver was automatically turned off when computer restarted in safe mode. Now, I am working blind, I know there is a sequels of keys to press when computer starts up in order to return to normal mode.
View 3 RepliesI tried to boot into safe mode via msconfig then after restarts it showed BAD_POOL_HEADER and PAGE_FAULT_IN_NONPAGED_AREA. I've tried chkdsk and system recover. I don't want to Reset my laptop. S
View 1 RepliesIs there a way to boot into Win 10 in a safe mode? The reason I ask is I am having trouble in normal mode trying to get rid of my win.old file. It will let me delete some of it but not all. So maybe in safe mode I can delete it all or am I missing something here?
View 6 Replies
