I get to the screen saver and the mouse and keyboard don't work so no way to get to enter pin screen this happened after multiple installs from win 7 ultimate (originally on my machine) to me purchasing pro version clean install. it works for between 5 and 10 boots then bang I am running a dell quad 4 2.7 MHz machine with 8 mb ram have loaded win 10 5 times and on different drives no difference just when I think problem is solved BANG it bites me in the butt again have a Microsoft wireless mouse and keyboard and did download the latest win 10 drivers.?is my machine to fast and the screen saver screen is loading before the drivers?
Last night I accidentally hit 'hibernate' and as i was in a rush i held the power button. Low and behold i woke up this morning went to put it on and got to the BSOD. I basically get to the login screen, login and then it repeats. Ive had the BSOD before but it just restarted and everything was fine. Now I'm trying to turn the pc on and its stuck in a reboot cycle, doesn't get to the login screen. I've literally tried everything, the PC won't even reset or anything. Genuinely stuck....
After converting from Windows 7 to 10 the screensaver delay time resets to 1 every time I boot the system. This prevents the screensaver from activating. I set the time and press apply and then works all day until I sign off at night and re-boot (power up) in the morning. I did not have this problem with Windows 7.
The other day, I tried to do a factory reset on my laptop, but it failed, and I could only click cancel. Now, when I booted up my computer, it goes to the ASUS logo, then a black screen, still backlit, with an underscore flashing in the upper left corner of the screen. I can access the BIOS, and have been trying to do boot overrides. I don't have the ASUS Recovery partition installed on the laptop, and I don't have any possible ways to install an ISO. T
Decided to install Windows 10 this weekend. From what I can tell, it installed properly. But cannot get past the "Welcome to Window 10" Screen. See image below. I am on a home-built PC with Window 7 Pro. All current updates to Windows 7 are installed, and the Win 10 compatability screen shows that my system is 100% compatible.I have been searching all over the internet to find a solution, and nothing seems to apply to me. here's what I've done:
I have rebooted. Disabled Microsoft's antivirus. Disabled ALL USB ports except for Mouse and Keyboard within the BIOS. I made sure my Bios is up to date (Asus Rampage IV Extreme). Unplugged everything from the PC, USB and Ethernet cable.
I have been able to get to a troubleshooting screen. See below. I can use Mouse and Keyboard here. But cannot boot into Win10 with mouse and Keyboard. I enabled Safe Mode, but when F8 is hit at startup, I am only able to get to a selection of Hard Drives (3rd Photo).The only thing I am able to do is revert back to Windows 7, which works fine after that.
I have tried installing from Windows Update, and the direct link download. I've uninstalled the Nvidia drivers, and still not able to proceed past the first image below. It's as if the mouse and keyboard do not work. So I cannot tell if the system is locking up when it gets to this point, or if something else is happening. The error code I get is: c1900101-40019, but don't see an exact answer to what that full code means.
I installed Windows10 and it opened . I looked at the start menu and then logged off. The next time I started my computer I could log on because I didn't have a password. When I used my phone to set a new password, I could not set one up. The msn.com site wanted to recover not take a new password.
I have a desktop computer that I just built with Windows 7 home premium installed on it. It was working great but yesterday I decided to upgrade to Windows 10. After the upgrade, it brought me to a screen that says welcome back with my username and a space for me to put my password. When I input the correct password, the computer freezes and eventually restarts and brings me to the same screen again. Pressing F2 or Del while it powers on does nothing and so does pressing F8. I cannot restart while holding shift because there is no restart option on the login screen it brings me to. I know that the password in right because if I put in something else it just says password incorrect. Clicking on "I'm not *myusername*"also causes a crash.
My computer easily meets the requirements for the OS and the SSD it installed on still had over 40 gigabytes left on it after downloading the 5 gigabyte file so I don't think it's a hardware or storage problem.I don't care if I have to restore it to windows 7 or reinstall windows 10, I just want it to work.
I am trying to upgrade GENUINE Windows 8.1 PRO x64 to Windows 10 Pro x64 from the ISO I made from the Microsoft RTM files. I am upgrading from within the 8.1 OS and choosing the option to keep "nothing" of my settings and personal files.
I have two problems.
The first is that the installation asks for a product key. On the other hand, when I upgraded my Windows 7 machine to 10 from within the OS it didn't ask for a product key. Why do I need to provide the product key to upgrade my 8.1 system, but not my 7 system?
Second problem is that I can not upgrade from 8.1 PRO to Win10 PRO. When I put in the general product key for the Win10 HOME edition the install proceeds, but it does not take the other (different) product key corresponding to the Win10 PRO version, even though it should. Why can't I go 8.1 PRO -> 10 PRO?
My laptop began moving incredibly slow last night, like the cursor would hardly move and it sounded like it was running extra hard. I turned it off and this morning it won't load past the start up screen. And still, the windows loading icon spins incredibly slow.
Eventually it goes to a black screen for some time, then the automatic repair icon appears, then "diagnosing your pc". It made it past that once and got to the advanced option screen but was moving so slowly that I couldn't click on anything.
Upgraded windows 8.1 pro to windows 10 this morning. Loaded OK but when it reached the "restart" point computer would not boot up. Just hanging & cannot go past the manufacturers logo. Before installing checked that their were no updates need or pending. After a good while booted off old windows 8 disc with intentions of re installing it but just got a list of drives none of which would accept an install.
i am running a Samsung NP940XG3-K03US. I just upgraded to Windows 10 and my keyboard and touch pad are not working. I have tried windows update, intel update, samsung update tools and nothing has worked.
I (think) successfully updated to Win10. But, when I went to start up I can't get past the hi there screen. The password box will not populate when I key in my password. I do not see an arrow or any indication that my mouse is working. Tried rebooting with keyboard disconnected then reconnected and no go.
I had no problems with either upgrade on my laptop to Win10 Home or desktop PC to Win10 Pro, It's only after a recent update on my PC with Pro that I can't get past the password screen when logging into Yahoo mail. Filling in my user name/email account works fine but the next screen for my password won't work. I click the "continue" button but nothing happens. This is the only site so far where this happened.
I installed Windows 10 on a MS Vista OS, Viao laptop about a month ago. Everything has been fine. I've been learning how to use Windows 10, and have been more or less happy with it.
On October 16, 1015, I booted the laptop just like I do every morning around 8:30 am. I got past the loading screen, got the Loading screen photo image, and then the login screen. I logged in, and got an alert that Windows 10 updates were available. Since I had 30 some minutes before I needed to actually USE the machine I told it to update. I clicked the update button, and Windows 10 partially logged me out to do the update. When windows restarted, I got past the loading screen, and got to the Login screen.
But after putting in my Windows credentials, I got a blue screen with a white circle progress indicator, and it sat like that for about 20 minutes.
I restarted by pressing the power button, but am now unable to even to the loading screen. As soon as I hear the "booting windows" sound, the blue screen with the white circle progress indicator comes up. I've tried this about 5 times, letting it sit for about 30 minutes each time.
I am trying to find a way to get into safe mode without the use of the "restart" function, but either that data doesn't exist or I am not using the correct search terms to find it.
I had to reset my computer. I selected to keep my file have because I didn't have any backups at the time. The reset completed successfully but now windows has been stuck at a please wait screen for the past 24 hours. Here's the link to show you what is happening [URL] ....
My specs are: Motherboard: GIGABYTE 970A-UD3P rev. 2.0 CPU: AMD FX 6300 Black Edition GPU: EVGA GTX 750 Ti FTW RAM: Ballistix Sport XT 8GB DDR3-1866(PC3-14900) DL10 Dual Channel Desktop Memory Kit
I updated from Windows 7 to 10 last night and now I cannot get my Screensaver to work or get my screen to turn off in the power settings. Something must be causing the screen to stay awake.
my screensaver is currently not working in windows 10 and since its not working it wont let the display turn off or go into sleep mode. When I was using windows 7 the screensaver would work fine and ever since i upgraded it it will not work now.
As the title says, I'm unsure as to how to get my 2nd monitor to replicate my main computers screen saver. Whenever my screen saver is on it only displays on the main computer while the 2nd monitor is black. I have it on extend displays, in case that's a question.
Any fix to get the screensaver to work or the very least to get the screen to turn off. I have the screen saver set to 4 minutes of inactivity and The screen to turn off after 10 minutes of inactivity.
I have a Lenovo flex 2 laptop that is brand new and used to run windows 8.1 until earlier today.
I opted for the recommended win 10 upgrade, and things went smoothly until it was time to reboot.
The laptop begins to boot, I get to see the Lenovo start screen for a few seconds, and then it turns off before starting over again.
This loop has been going on for 8 hours, as of right now.
All attempts to access the boot menu via the F2, F8, F11, and F12 keys have failed, and the novo key has had no effect.
I am desperate at this point- the laptop is brand new. And now it is next to useless. No actual customer support is available in the country I live in. I just want a way to go back to win8.1.
did soft reset worked but later again the same issue "loading..." did hard reset worked but later again the same issue "loading..." did hard reset twice using volume and power button worked but later the same issue"loading..."
I updated today from Windows 7 to 10, and everything seems to be working great except for a screensaver I purchased a few years ago. I know it's a relatively minor problem, but it worked fine on 7.
The screensaver worked by taking a screenshot when initialized, and displayed various effects over that image.
Now when I attempt to run the screensaver I get the following error:
I'm not running any other programs whatsoever, so I wonder if a core Windows process is now interfering with this?
I'll try to use a folder with pictures as screensaver - which I had in WINXP and WIN7. But I receive a message, that the folder can't be used because it's not in the right place. Where should I store this folder to work as screensaver in WIN10?
