Cannot Log Into Computer - Stuck On Keyboard Layout Page
Oct 1, 2015
I have a HP computer and I installed windows 10 about a month and a half ago. Now I cannot log into my computer because it continues to get stuck on a keyboard layout page. Windows came installed originally on my computer so I have no start up disc or anything. And windows 10 I got from the recent download so no disc for that one either. Is there anything I can do to get the screen to disappear? When i try to click on my keyboard or mouse while it is up neither works.
View 1 Replies
Similar Messages:
Aug 30, 2015
Went to bed last night and Windows was fine, after a few initial glitches it's been working without problems for more than a month. This morning, I wake up and it is showing a screen that asks me to choose my keyboard layout which does not respond to any input devices. When I manually power the computer off and back on, Windows says it's starting an automatic repair, then brings up the choose my keyboard layout page again. I can't get past it.
Note that I loaded Win10 from the download and this computer didn't come with OS disks for Win7, so I have no DVD to boot from. I am also going to be very very annoyed if I have to go buy an OS disk, reformat and lose the 20,000 pictures I have stored, It's an HP Pavilion (I can't read the model number right now, it is about four years old), has a quad-core processor.
I cannot get Win10 to go into safe mode from this configuration. As soon as Win10 starts running, it just stops seeing that my keyboard is there at all, so F8 and/or Shift-F8 have no effect -- Windows never sees any input device is there from the time it starts its automatic "repair".
If I do have to reformat and lose everything, or if I have to pay a repair shop to restore it, I guarantee the next computer I buy (and all those I get down the road) will have a fruit with a bite out of it featured prominently on it...
View 11 Replies
Jul 31, 2015
I was installing win10 on my pc with media create and got to the screen where it asks you for the keyboard layout. The computer does not respond and the hdd light stops blinking.When I kill the power and reboot, the computer loads properly into windows 7 desktop then says that windows 10 could not be installed and says this:
Error 0xC1900101-0x20017. The installation failed in the SAFE_OS phase with an error during BOOT operation.
View 22 Replies
Oct 16, 2015
i was repairing my lenovo pc windows 8.1 with windows 10. when i was on the middle of repairing, i get stuck on 'çhoose your keyboard layout' command because it is not responding to either keyboard or mouse, even if i force it to shut down, it's going directly to choose your keyboard layout.
View 2 Replies
Jul 27, 2015
I recently update Windows 10 to the current newest update, and I noticed that I had a glitch where my other display (I have 2 displays) just turned off. I went to the settings to check it and it wouldn't identify it as being there so I decided to restart. Once it finishes showing the first Windows 10 splash screen both screens (it recognized the other screen after restart) went black. Nothing would appear. Not even a cursor of my mouse.
So here is where the problem lies now: I decided to restart again and this time something did happen. On my screen it asked me what keyboard I am using.nothing was being detected. My USB Mouse (which works fine otherwise) and my hardwired USB Keyboard (works too) just wouldn't be detected. I do not have any of the "gaming" mouses. They are both just very basic Logitech mouse and keyboard designed for such events.
View 1 Replies
Jul 29, 2015
Windows 10 upgraded my computer today. The problem I am having right now that I am stuck on choose keyboard layout auto repair screen. My keyboard works but when light goes out on keyboard and mouse I am not able to actively select any layout.
View 9 Replies
Sep 19, 2015
How to fix that problem....
View 9 Replies
Oct 22, 2015
Yesterday I set my Bulgarian keyboard layout to be the default one and my German to be the secondary. Then I shut down and today when I tried to log in, only the Bulgarian layout was enabled (Cyrillic letters) and I can't switch to the German layout (Latin letters). You guessed it - my password uses Latin chars . The key combinations Alt+Shift or Win+Space are not working.
Password reset works only with pre-made passdisk or something like that (I haven't set one). I tried going to Troubleshoot mode, but couldn't find anything useful there yet. Running the command prompt troubleshooting option gave me the opportunity to change the keyboard layout, enter my password and use the cmd prompt. There I tried to use the "control" command to set the keyboard layouts but it doesn't recognise the "control" command. Maybe I have to navigate somewhere else (default was system32).
View 7 Replies
Sep 25, 2015
I'm trying to reset my PC to get out a temporary user profile I'm stuck on. Every time I start the reset process, I am sent to a frozen Choose Keyboard Layout screen. I can't use my mouse or touchscreen to choose a layout.
View 7 Replies
Dec 21, 2015
Okay, so I take blame for accidentally messing up my Windows 10. My NVIDIA graphics card wasn't working and wasn't letting me install my drivers. Well that aside, now that I installed older Drivers Windows 10 registers something horribly wrong. It wants to do a system repair. Okay, good, fine with me. But then when it gets to the page for me to select a keyboard layout, I have no mouse and my keyboard doesn't work either.
Anytime I press a button on them their backlights turn on, but then turn back off when I don't do anything with them.
I can't afford to get a new OS, I have no DVD Drive so I definitely can't do anything that requires a disk. What do I do?
View 6 Replies
Oct 16, 2015
I have just installed win10 64bit and am at a loss on how to install a second keyboard layout. I am learning Russian and had the Cyrillic keyboard with my old win7 os. I looked at the language packs but do not want to change all of my os to Russian (it would take me a long time to do anything..), just the Alt+Shift I used to do. I checked both these forums and google and could not find a thing. Makes me think it's not available
View 3 Replies
Feb 26, 2016
I know how to change the keyboard layout by clicking on the (in my case) "ENG US" next to the Notification area. So i change it to "ENG" (wish I could make that say "ENG HANS"). But, after a reboot, I am back to "ENG US".
how to make the change stick?
View 3 Replies
Jan 12, 2016
Windows creates another keyboard layout automatically, based on the regional settings. My regional settings are set to UK, however my keyboard layout is a custom made based on US layout.
After restart I have no UK keyboard layout, then at some point it just appears by itself (I don't notice when does it happen). How can I prevent this from happening? Windows10 ...
View 1 Replies
Oct 30, 2015
I have a desktop computer, it was working fine almost a year and now from a few days I am having a serious issue and that is when using my computer (generally or during gaming) it displays an error i.e PAGE_FAULT_FOUND_IN_NON_PAGED_AREA. The screen turns pink and the edges are green (that's probably because of the resolution as I use 3840x2160 so the error kinds of destorts) but that's not the real issue, the main problem is the error itself.
My Computer specifications :
Intel i7 4790
Asus Maximus VII Formula ROG
Kingston 8GBx2 DD3 Ram (Simple ones, not the gaming ones)
1TBx2 Seagate HDD
Asus GeForce Titan X
Corsair CX850M.
View 1 Replies
Aug 9, 2015
Just upgraded to windows 10 on my surface 3, the only thing, MAJOR thing that is bugging me and making me want to revert back to 8.1....
On 8.1, the window I was using resized itself so the entire window was visible. Windows 10 has decided I don't need to see the bottom half of a page whilst I am using the keyboard.
So if I want to type Facebook messages I have to keep opening and closing the keyboard to check what I have typed.
I know they've had a lot of bugs to sort, but I CANNOT believe this has been overlooked.
Tablet mode doesn't solve the problem and I don't intend to use tablet mode, it's utter garbage.
View 4 Replies
Jan 8, 2016
Out of the blue I have suddenly started getting serious low memory problems with warnings and the screen going black soon after startup. My Page file is stuck at zero (which I guess is the cause?) and I cannot change it in the configuration menu. I have tried automatic set, and custom set which appears to have worked except total Page memory stays at zero and is still zero after restarts.
It has been difficult to launch or stay online to search for advice as everything goes blank before I achieve anything. I have the minimum number of programs running.
View 4 Replies
Jan 8, 2016
I have suddenly started getting serious memory loss problems, with the Tablet PC showing warnings and closing down before I can achieve anything. The Page file is shown stuck at zero. I have not been able to change it in the configuration menu. I enter automatic or customised min / max but after a restart the Page file is still '0'.
How do I get the configuration tool working again?
View 1 Replies
Aug 21, 2015
I am periodically experiencing an issue where the o button starts typing itself continuously until I either restart or lock the PC. It's not a keyboard issue, since it happens whether the keyboard is plugged in or not, even with a different keyboard.
I haven't yet found a way of triggering it, but once it starts, it happens quite often after each time I stop it.
View 2 Replies
Oct 21, 2015
i just formatted my pc. I got the following screen; URL... My mouse and keyboard are not working eventhough there is a light burning in my mouse
View 1 Replies
Sep 6, 2015
Upgrade from Window 8 to Window 10. My HP laptop notebook seems like it has been process by evil spirits. The touch pad got stuck so often and the keyboard began typing by itself with endless number 9. Sometime, it refused to do the work. How to get rid of these demons from my computer. I am unable to buy a new one after the warranty ran out after 1 year.
View 1 Replies
Aug 2, 2015
When I start my computer it goes to a page that has date and time of day...I click and it goes to a sign in page for my microsoft account with password or pin...Can I start my computer and by pass this and go directly to my desktop page?
View 3 Replies
Oct 7, 2015
Although my printer will print a test page which says that it is working correctly since installing windows 10 I am unable to print anything else because when I try to print the page ie pictures or anything from my computer it is copied to my document only. I have reinstalled the printer and also re installed win 10
View 5 Replies
Mar 29, 2016
Since upgrading to Windows 10, why is my computer so slow to open a file, internet page even after doing a reboot, it is so slow and sometimes doesn't even open.
View 1 Replies
Aug 3, 2015
I have followed several similar threads and their fixes for this problem with no result. After downloading the Win 10 upgrade, my system then said "loading updates". Then it restarted with a blue login screen saying "Welcome Back!" And a box to enter my password. The cursor is blinking in the box, but neither my mouse or keyboard works.
I have hard booted several times since the ctrl+alt+delete does not work. I am also not able to access safe mode as none of the "F" keys work during boot up.
I have tried the following:
1. Unplugged all USB devices except keyboard.
2. Turning off internet at the router.
I have a Dell desktop, and upgraded from Windows 7, with a Netgear router/modem. The only way I can get the system to move is if I power off at the main switch after booting up which goes into bios and disc diagnostics, but I don't know enough about computers to know what to do there!
View 9 Replies
Oct 15, 2015
Tried using DDU and it asked to enter safe mode, went to safe mode, it then said "insert bootable media" and I tried to select it from BIOS but I could never get to BIOS because my mouse and keyboard controls were dead. Nothing I've done (plugging, unplugging) has fixed this issue. How to fix this.
View 1 Replies
Aug 12, 2015
This is happening sice i installed windows 10.On windows 8.1 this was not happening.
Every time when i try to update a game,and install something my laptop restarts and it saying "Page fault in nonpaged area"
I know how to fix it.Only instaling and updating games from Steam works.
View 1 Replies
