I installed window 10 today and cannot play any CDas there is no sound. DVD picture is fine but no sound. My computer is a Dell PC 260 and has AMD 6450 card. I tried very hard to make it work. I don't where the problem is. I had window7 before and had no problem with any thing.
View 3 RepliesWhen I play movies on my tablet it's all OK. But, when I do the same thing on my lap top I only get sound.
View 2 RepliesAfter installing windows 10, I can't hear any sound from my computer, and low volume when play audio files.
View 2 RepliesMy videos all play upside down when using VLC. They are OK on Movie player. I am using the latest VLC download.
View 1 RepliesWindows 10 Pro play sound at startup is checked but the select a sound option is grayed out...
View 6 RepliesI just upgraded to windows 10 and now my dvd player, and videos from my hard drive, play with sound and no picture.
View 1 Repliesonly media player and groove music don't play audio, other apps play mp3 and wav.( MP and MG plays noises).i have IDT High Definition Audio CODEC
View 2 RepliesSo I've used Windows 10 for about 6 months now without any issues beyond a game or two not working, which usually have obvious solutions or unofficial patches. This one stumped me though.
Basically, all play buttons stop working randomly, as well as audio dropping out and sounding robotic, as if slowed down significantly, upon returning.
Some background, this issue began a few days ago, after my third monitor broke. I won't go into that, as it shouldn't matter, but after it broke and I unplugged it, the issues began to arise. I was attempting to edit something in Premiere Pro when I noticed it first. The preview window would not play, although the play icon would turn into a stop icon. I didn't think much of this, but decided to test something else by making a new project and putting some other footage in. This worked. I assumed that the issue was with my SD card, as the other footage was gameplay recorded directly from the PC, whereas the other footage was taken from my camera. I rebooted, and the issue was gone... for a bit. A little bit later, the same issue occurred. This time, however, no footage whatsoever would work. Even YouTube wouldn't work. The only software that could play video was VLC. I did have this issue before, I believe sometime in November. That time a reboot fixed the issue for months.
Later I began to notice other issues. Audio would drop out for a few seconds, no matter what was playing. Spotify, YouTube, Premiere, everything. Sometimes it would come back normally. I've checked my interface, and it appears to be fine (it's a Focusrite Scarlett 2i2). Sometimes audio comes back robotic, like it was slowed down by editing or by using the speed option in YouTube. I've never had this issue with Windows 7.
I've reset to a slightly earlier build of Windows, but it hasn't worked. Since I've had 10 for more than a month I cannot revert to 7 without a clean install, which I'm hoping not to do, mainly because a clean install would obviously be terrible since I'll have to reinstall everything, but also because I do like Windows 10, and have had no issues so far.
I imported a video to my windows 10 pc with my camera, it will play the audio but not the video.
View 1 RepliesI have a Dell Latitude E6520 running Windows 10 Pro x64. When I try to watch YouTube I get no audio. Spotify plays and gives no errors but doesn't have sound. When I plug in headphone sound plays but as communications headphones.
When I try to play a test sound through Speakers/Headphones I get an error that says "Failed to play test tone." When I try to troubleshoot it can't identify the problem. I have attached the report from troubleshooting.
Sometimes when I play videos there is no sound even though the volume is at 100% on both my laptop and the video. Is there any way to correct this?
View 5 RepliesAfter a successful upgrade from Windows 7 to Windows 10 I discovered that YouTube would not play. Fixed the video problem by running in compatibility mode .. BUT then noticed there was no sound from either speakers or headphones on my laptop. No Windows sounds, iTunes, nothing worked. Could this be a setting inadvertently turned "off' somewhere ? Up until I got YouTube working the sound was fine with Windows 10. I just don't know where to look to rectify this. Rebooting etc doesn't make any difference. I don't suspect a hardware fault, it must be an OS corruption or something.
View 3 RepliesI'm running Wn10 and I would like to change some sounds. I'm running a background theme. I have downloaded a Wav file (thefreesite.com), added this file in a sound scheme (mail notification), tested it, saved it as modified scheme, but the sound doesn't play at all (when mail arrives). Is it perhaps not possible to play downloaded Wav files in a sound scheme ?
View 9 RepliesI updated my computer to windows 10. when I upgraded and played audio, video on local computer or on any website. I could not hear music/ sound. when I play audio file through Windows Media Player, I get following error.
"Windows Media Player cannot play the file because there is a problem with your sound device. There might not be a sound device installed on your computer, it might be in use by another program, or it might not be functioning properly."
And when I play audio file using Groove Music. Can't play. We can' find an audio device for your PC Make sure headphones aor speakers are connected. For more infor search your PC for "Manage audio device".
0xc00d36fa ( 0xc00d36fa) |Close| (button).
When I go to manage audio device. I play test tone. and get message box saying that "failed to play test tone".
I installed Windows 10 today, but since installing it, i have had no sound/audio. The only sound driver I have is NVIDIA High Definition Audio, but it cannot be selected as "default device".
View 6 RepliesI'm having an incredibly frustrating issue with my sound where it randomly, for no reason that I can find,- stops working completely. I've reinstalled my audio drivers, ensured they're up to date, I've run chkdsk's and done just about everything short of a reinstall, but no dice.
When the audio breaks, spam-disabling and re-enabling the speaker in Playback devices will occasionally solve it for a few more minutes before it eventually breaks completely again, forcing me to reboot. This happens every once every 20-40 minutes, with no pattern or any trigger that I've been able to find.
The bars in the volume mixer are still moving as if sound is playing, the in-built Windows 10 audio troubleshooter can't find any problems, and my music player keeps playing music etc. as usual. The only indicator that the sound has stopped working (beyond the obvious lack of sound) is that youtube videos get choppy and start stuttering.
Here is what my Device Manager shows in sound and audio; [URL] .... Note that disabling/enabling High Definition Audio and Realtek Audio in various combinations does nothing to fix the issue.
Here's my dxdiag log [URL] .... I'm using Windows 10, and my motherboard is an Acer FMP55
I just upgraded my ASUS Laptop from Win 8.1 to Win 10 X64. (It has Via HD Audio)
Initially, sound worked but the microphone didn't. I fussed with many settings but nothing seemed to work.
I uninstalled and reinstalled the drivers, then the mic seems to work but sound doesn't.
Some of the events that I have encountered are: One message said "Windows has detected that Audio enhancements for the following device are causing problems". I disabled all enhancements but nothing changedBased on other posts, I tried to change the default format to 16 bit and other Hz. Nothing worked.I tried to play a test tone in the speaker setup and got the message "Failed to play test tone".I tried to update the drivers but was informed that I had the latest drivers
I went to the VIA web site to look for new drivers but there are none listed for Win 10.
Is there something else that I can do or is it just a matter of waiting for new VIA drivers? (VIA HD Audio is such a common audio chip that I find it hard to imagine that VIA and Microsoft haven't solved the driver problem - particularly given the Insiders Hub process!)
I installed Windows 10 and I have no sound. When I looked in devise manager it said High Def Audio devise was updated.
View 1 RepliesIt seems that there are constant issues with windows 10 and sound blaster sound cards like mine. I have a sound blaster x-fi titanium pci express sound card and every time i turn off my speaker controller(unit with volume and adjustments for sub, center and rear speakers); then turn it back on after awhile; it gives me a high pitched hum noise and the audio comes out all garbled and crackling.
View 3 RepliesSo I just updated my Toshiba laptop from Windows 8.1 to Windows 10 and now I'm having audio problems. At first after I upgraded I had no sound. I fixed it by uninstalling and reinstalling my Realtek audio driver. Now I got my sound back, but now whenever I play audio the sound isn't clear anymore Especially when I use YouTube. I updated my Realtek audio driver from version 6.0.1.7541 to 6.0.1.7586 and I still hear the buzzing! I tried audio troubleshooting and it said the problem couldn't be identified. What do I do?
View 3 RepliesModel: Lenovo z50-70
OS: Windows 10 64bit
Drivers: Conexant smart audio HD
The picture below pretty much sums up my problem, in all previous versions of windows i have had this tab enabled with various options to further enchanement any sound i hear with my headphones.However, it seems dolby has it's own horrible version (unless im using it wrong) as a headphone user i find the sound to be a lot worse in quality with dolby's enchancments, in fact when i switch it off the sound is way better.
I have sound from the speakers, but not from the headphones.
I've tried the headphones on my phone and they work, so it is the PC.
It's like the headphone jack doesn't work, but I have suspicions that it's about the drivers.
In the sound settings/playback devices, the speakers appear, but not the headphones.
I got mine with everything installed. So if I uninstall and reinstall Realtek, I might mess this up more. I don't even know what version I have and I can't understand the terms used in the instructions.
Should I just wait for a system update form Microsoft. Or do I really have to uninstall my audio software?
My audio seems to not be working. I have never had this issue with this computer before until 2 days ago. I was able to roll back my system to an older date which fixed it for about a day. This time, however, it did not get the same results.My audio is just...well... gone. The sound (lower right corner in the task bar) says it is muted. When I click the icon it brings me straight to a troubleshoot, which we all know never actually fixes the problem.
The driver is installed and before I get asked if I have done the un-install and re-install, yes I have.I have un-installed and re-installed close to 6 times now. I have gone into the services and restarted (stop and start) the windows audio service close to 12 times.
Due to my audio working when I rolled back the system before, I assume my sound card is fine, but the software is not working properly (despite what the device manager says). I have also updated my system to windows 10 from windows 8.1, yet the issue remains.
I have a Fangbook III made by Cyperpower PC. I am unable to play sound via the on-board speakers for the laptop. I am however able to play sound through the 3.5mm auxiliary jack input. I have speakers set as default device under the playback settings.
This is where is gets strange. Whenever I attempt to delete the Realtek audio driver, whether it is through windows or a 3rd-party driver uninstallation software, Realtek always comes back within a few seconds. Right before it does come back, under playback, it separates speakers and headphones with both having the driver High Definition Audio Device. If I hurry before the Realtek driver comes back the speakers seems to work! But once the Realtek audio speakers comes back, the default speakers and headphones goes away and I continue to have the same problem with the Realtek driver.
I attempted to reformat the computer with windows 10 and erase all drivers but Realtek was already installed. I assume it is required for this specific laptop? How to direct the Reaktek High Definition Audio driver to use the speakers instead of the auxiliary jack?
[URL] ....
I recently reset my windows 10 then I got problem my laptop can't produce sound so I can't hear sound from it the speaker logo in the task bar have x mark and when clicked it opens troubleshooter then windows can't find the trouble. I also uninstall and reinstall my audio driver, Realtek High Definition Audio and NVIDIA High Definition Audio, but nothing change this is frustrated me I need sound to play games, watching films, and watching youtube, so anyway I need sound to make my life harmony. One thing the screenshot (Windows+Prt Sc) also won't save the picture only dimming few second then I couldn't find the pictures.
View 3 Replies