If I decide to make a clean install of Windows 10, after my upgrade, and decide to change my current HD to a SSD or larger HD I'm wondering would it still Activate? So many questions I'm still not sure about. I did a "complete" investigation prior to upgrade or so I thought.
View 1 Replies
Will the iso file on the usb reformat my current SSD with licensed Win 7 Pro 64bit system installed ? Or do I need to reformat the SSD prior to using the USB to clean install Win 10 Pro 64bit ?I have multiple images of my Win 7 Pro and will probably set up a dual boot down the road...but want to be sure I don't goof here in step 1.
Will the Win 10 Pro 64bit iso file from Brinks tutorial auto format the existing SSD with Win 7 on it now when I launch it from the usb drive...or should I manually reformat the SSD first ?
I did the upgrade from Windows 7 Ultimate to Windows 10 Pro. Privacy concerns aside, I like Windows 10. I haven't had any problems with software and hardware compatibility. I use 27 different email accounts within WLM 2012, for a variety of reasons. Many of these email accounts have additional folders that I have added. The accounts consist of sbcglobal.net, live.com, msn.com, outlook.com and windowslive.com.
I'm using a Dell XPS-17 L702X laptop with two 500GB internal drives. I will place the WLM 2012 backup on my second internal drive, Drive D. I need to know exactly how to backup WLM to this second drive so that I don't lose any saved emails in the various accounts. I will then import everything from this backup to the clean installation of Windows 10. Is this possible, or will I have to install WLM 2012 on Windows 10 and then add and configure each email account?
I want to do a full backup of my drive "C" in the event I have to recover. I'm running Windows 7 Home now. I have a number of apps on it from both Microsoft and Adobe, and I can't afford to loose them if the upgrade to Windows 10 goes bad. Are these the correct steps:
Create a system imageCreate a system repair diskCopy all data file I can find from other hard disks (drives D, E, etc.) Is this all I need to do to have a high level of confidence in the update?
I have my serial key and an install ISO saved on a USB, my question is when I install my new motherboard and processor, will I have an option to completely wipe the computer for the fresh install of windows with none of my previous saved memory. Essentially factory resetting but just with windows and drivers.
I've never done an upgrade like this before and I know you can boot and download the graphics drivers and such, but how do I get about wiping all the memory?
I currently have an ASUS motherboard (p9x79 Pro) and am running my operating system on a spinning drive and using the ASUS cache which uses a 128GB SSD drive to cache the operating system disk.I would like to dump that arrangement and run the operating system on a larger SSD drive (they are cheaper now). Ideally I would do this at the same time as moving to Windows 10 so that I only have to install once.
My question is - if I go for a clean install to Windows 10 can I put this directly onto a new clean SSD drive - using my old windows 7 key to activate it (it was an OEM key I bought when I built the system) or will I need to clone the Windows 7 system onto the new drive before installing?The motherboard will not be changed.
I have a new rig and made a clean install with Win 8.1 Pro.
After that I directly upgraded to Win 10 Pro within running system.
Are there any advantages to do now a clean Windows 10 installation?
My motherboard manufacturer only has a file for the Windows 10 chipset driver but I remember in the past I was supposed to download the chipset software installation utility first if it was the first time doing a chipset driver on a new comp.
View 1 RepliesHow can I clean install windows 10 on a new SSD, saving the fact that I had original windows (that was purchased built in with the laptop)? Do I need to find the CD key?I have a generic one as I upgraded to windows 10 for free (or are all windows 10 have generic CD keys?).How can I use my Windows licence on a new SSD?
View 1 RepliesMine was with Win 7. This was done few years back throughWin7 upgrade disk. I have this Win 7 upgrade disk and COA for it. (Bought from Amazon).... Can I revert back to Win 7.....
View 3 RepliesMy laptop got stucked in boot loop so i decided to do clean install from dvd. I wonder if i can leave D: partition and delete C: and those two of 350MB and 450MB size? Will i still get that unallocated space and be able to do install on it?
View 2 RepliesI'm about to do a clean install of Windows 10 pro 64bit on to a new SSD I just received in the mail and wondering how I will be able to activate it? I originally did an upgrade from Win7 Pro to Win10 pro and then a clean install from there back when Win10 pro first became available. I read that I can use the Windows Key on the back of my laptop but I'm not sure that will work because it's a whole new SSD.
View 6 RepliesAll the info I have found on a clean install has been about the Insider Preview, when the official upgrade is available at the end of July, will I be able to do a clean install?
View 6 RepliesMy PC was running 8.1 French version converted to English version (Reseller screwed up).In practice a lot of the stuff was displayed sometimes in Eng sometimes in French. I have the 8.1 French CD.So instead of doing the upgrade which I thought would result in another mishmash of languages, I did a clean install of 10 Home Eng via USB key downloaded install media.Apart from a few video probs (BSOD) blinking cursor, all went well.I cannot use 8.1 product key to activate. Looks like I may have to buy new product key for W10.
View 19 RepliesI had a licensed windows 7 PC and did the in-place upgrade to windows 10. However my main hard drive (an SSD) is too small and I want to upgrade it. I understand that if I do a clean install (from an ISO/USB) then windows 10 should still recognise my PC as it was activated.
However, if I change the hard drive (or add memory, add a graphics card etc) does windows still recognise my PC or do I have to go through the stupidty of installing windows 7, installing the service pack, waiting for the inplace upgrade to windows 10, activating, and then wiping everything in order to do a clean install!?!?!
I was wondering if I do a clean install when I get the free upgrade from windows 8.1 to windows 10 if my device drivers (for my cpu, usb ports, wifi, etc) will stay.
View 1 RepliesI have been an Insider since the very first Insider build was released. I had installed each and every build first being on the Slow ring and the on the Fast. I had upgraded from a genuine Windows 8.1 Pro.
When the final RTM build TH1 Professional 10240 was released to Insiders ahead of schedule, I readily installed it and my machine was permanently activated at that time. The product key used was a generic one ending in 3V66T. Many of you may be knowing this.
Today, in fact just now, I formatted my system partition and installed a clean copy of Windows 10 Pro from USB which I had created using the Microsoft Creation Tool. When the setup asked me for a product key, I entered the same generic key as stated above. But now when I go to the Settings, it says the key doesn't work and hence, my machine cannot be activated. I signed-in using my Microsoft account before using the PC.
What the heck! I am an Insider. And didn't expect this to happen. What should I do next? Would the machine get activated itself after some time?
How can I do a clean install in my laptop with the windows 10 build 10130?
View 1 RepliesI have win7 and am going to install win10 from usb. I currently have my OS on my SDD and all my docs,prog files,ect on HDD. Ive read a clean install is best for win10.
My question is, can I delete all the SDD OS partitions during install, select install on the SDD while leaving my HDD completely intact? If so, what option would I select to get to the formatting partition screen without it automatically erasing my HDD files?
Currently I dual-boot Windows 8.1 and Windows 10 Insider Preview on my Lenovo Yoga 2 Pro. I want to eventually delete both partitions and create one big partition to clean-install Windows 10 RTM. My question is, will I be able to successfully activate that Windows 10 with my 8.1-to-10 free upgrade rights if I delete and combine both partitions during setup? I mean, because we're not going to be given product keys for our free upgrade, right?
View 4 RepliesI upgraded my computer from Windows 7 to Windows 10. It has already been activated. This Windows 10 installation is on the hard disk. I installed a new SSD drive in the system and did a clean install of Windows 10 on it. Unfortunately the Windows on the SSD drive fails to activate.
I talked Microsoft support and they told me to install Windows 7 on the SSD drive and then upgrade it to Windows 10. That seems like lot of work, especially since I have already installed Windows 10 on the SSD drive.I could clone the hard disk to SSD but I would rather start with a clean Windows 10.
I got my license to be an Insider. My Windows 8.1 was updated to 10 normally by the same software. Now I want to do a clean installation of Windows 10. But I want to know: If I do a clean install of Windows 10 that is reformatted my hard drive, insider lose my license? Which version should I install windows to keep my license Insider? .To be insider I mean I used pirated windows and got into the program and achieve microsoft Insider get my free upgrade to Windows 10.
View 1 RepliesI currently have an upgraded Windows 10 on my HDD. I'd like to do a clean install on a new SSD.
Migrating everything to the new SSD isn't a viable option for me as I don't have the budget for a big enough SSD with all of the programs and files i want to keep.
Drives:
C:/ (HDD)
S:/ (SSD)
O:/ (SSD)
Right, I have my OS (Windows 10) installed on the C:/ drive, but I'd like to reinstall it on the O:/ drive. I've only come across one way of doing it:
Clean installation, then copy/move the C:/ drive's content to the O:/ drive.This is what I'm aiming for:
-Having my OS moved from the C:/ to the O:/ drive.
-Cleaning the C:/ drive from all data.
-Keeping the S:/ drive untouched, no problem I'd say.
-Possible: Having the C:/ and O:/ drives switch names after the installation (So the SSD with the newly installed OS would be named C:/.).
Is this possible to do this in one move and use the same Windows 10 key?
I wanted to do a clean install of windows on my SSD again because it had corrupt files. So during the install I deleted my SSD partition to free space and install windows on it but it won't let me. All I have is Drive 0 Unallocated Space which is my SSD and the other is my OEM Reserve. What did I do wrong? Why can't I install windows on freed up space of my SSD?
View 1 RepliesWill i need a windows product key when i clean install windows 10 ?
View 1 Replies
