Clean Install - Some Apps / Event Viewer And Task Manager Not Responding
Mar 31, 2016
I had fresh clean install of Windows 10 Pro in MBR scheme . I want to know what caused this.Task manager and event viewer was not responding and some of the applications was not responding too. I was clicking and nothing happening. It was related to hardware or software? Disk was formatted due to MBR partition.My disk is Samsung Evo 250 GB , and 2x8gb Kingston Hyperx 1600mhz.Smart on disk is fine, GOOD status in Samsung MAgician and no errors in HD TUNE. Memtest86 not showing errors.
After format to GPT and install again Windows 10 all is fine and working properly. Just want to know what caused issue before format. Thx. It was related to windows/software or hardware?I made topic because some peoples told me that corrupt data , can be caused by faulty memory(( What is yours opinions? But like i said i test memtest86, Windows Diagnostics Memory and hdtune showing no errors. Maybe try GoldMemory or that will be waste of time?
I have an Windows 10 Pro. I want to know what caused this. Task manager and event viewer was not responding and some of the applications stop responding. I was clicking and nothing happening. It was related to hardware or software? Disk was formatted due to MBR partition.
My disk is Samsung Evo 250 GB , and 2x8gb Kingston Hyperx 1600mhz.
Smart on disk is fine, GOOD status in Samsung MAgician and no errors in HD TUNE. Memtest86 not showing errors.
After format to GPT and install again Windows 10 all is fine and working properly. Just want to know what caused issue before format. It was related to windows/software or hardware?
Recently installed Office 2016 and it works fine, but i notice an Event Viewer error
SideBySide 35
Activation context generation failed for "C:Program Files (x86)Microsoft Office ootOffice16lync.exe.Manifest".Error in manifest or policy file "C:Program Files (x86)Microsoft Office ootOffice16UccApi.DLL" on line 1.
Component identity found in manifest does not match the identity of the component requested. Reference is UccApi,processorArchitecture="AMD64",type="win32",version="16.0.0.0". Definition is UccApi,processorArchitecture="x86",type="win32",version="16.0.0.0". Please use sxstrace.exe for detailed diagnosis.
This file does not have a program associated with it for performing this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel."
I haven't been able to locate the program and am not sure where to find the correct program. I've searched the net but there's no mention of Windows 10.
I just had to create a whole new user profile so I could install a program so I could use it. In my regular profile I could not find a way to get this program to run. It would be running in the task manager but not open on my desk top. Weird. A remote support person from the software company could not figure out why. He suggested I create a new user account and install it again. I did and it worked. However, I'm not logged into the user account where I have all my files.
For the past few weeks I've been seeing errors in the Event Viewer relating to the LockScreen. These only happen when waking the PC up from Sleep mode. The errors are:-
5973 Activation of application Microsoft.LockApp_cw5n1h2txyewy!WindowsDefaultLockScreen failed with error: The app didn't start in the required time. See the Microsoft-Windows-TWinUI/Operational log for additional information.
and
1002 The program LockApp.exe version 0.0.0.0 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Security and Maintenance control panel.
make the "Clear All Event Viewer Logs using a BAT file" self starting such as making it run automatically on a daily basis or show me what code I would need to add to it to do that for me. I would just love to clear out the 10016s and 7031s codes daily.
I recently re-installed W10, and used Kari's tutorial to move the Users folder to a partition on another disk, using the sysprep routine.
This is a list of W10s Environment variables that apply to my account (MS/user/admin):
Those that relate to my account all seem to be pointing to the right location (H:Users).
However, until I turned off 'Sync my settings', the event viewer was littered with errors regarding ESENT--Extensible Storage (database) Engine, recorded multiple times per minute in an infinitely repetitive sequence: Events 494, 454, 488 & 413. The 494 event is the trigger:
SettingSyncHost (2876) {068B89D8-0F81-40D5-A335-0959E66CAECB}: Database recovery failed with error -1216 because it encountered references to a database, 'C:UsersomnesAppDataLocalMicrosoftWindowsSettingSyncmetastoremeta.edb', which is no longer present. The database was not brought to a Clean Shutdown state before it was removed (or possibly moved or renamed). The database engine will not permit recovery to complete for this instance until the missing database is re-instated. If the database is truly no longer available and no longer required, procedures for recovering from this error are available in the Microsoft Knowledge Base or by following the "more information" link at the bottom of this message.
Any way of directing the SettingSyncHost process to the right location? The drive/partition label (C:) should be H:, but otherwise the path is correct, and the db file (which is a hidden, system file) exists in that location.
It's not a problem for at present, as I don't have any devices that use that account, and have turned off 'Sync my settings' via Account settings; but it may be in the future, and may also be an issue for those who have moved the Users folder and have devices that give them that syncing feeling.
Incidentally, virtually all references in the MKB describe permissions rather than location problems, and the "more information" link in Event Viewer (Event Log Online Support) provides no information (Page Not Found).
I'm getting the following event viewer error every 15-30 minutes whenever a non-admin account is logged in.The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{D63B10C5-BB46-4990-A94F-E40B9D520160} and APPID {9CA88EE3-ACB7-47C8-AFC4-AB702511C276} to the user XXYY SID (S-1-5-21-1462133472-353174448-3584519177-1002) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
I've tracked the AppID down to RuntimeBroker. I've found a few posts mentioning a similar error for this application under windows 8, and suggesting changing the security settings as described. When I try to do this though, all the settings for RuntimeBroker are disabled, and cannot be customised. I've tried launch the admin tool as administrator, but it's still locked down.
Just upgraded my Win 8.1 Pro 64-bit to Win 10, and Event Viewer shows literally hundreds of Errors and Warnings. My 8.1 was almost error-free. What gives? Can I re-do the upgrade and try again?
I recently started getting this error in event viewer. There are a number of threads across the web about it, but none of them has presented the solution. The error is related to Runtimebroker.exe.
The application-specific permission settings do not grant Local Activation permission for the COM Server application with CLSID
{D63B10C5-BB46-4990-A94F-E40B9D520160} and APPID {9CA88EE3-ACB7-47C8-AFC4-AB702511C276} to the user NT AUTHORITYSYSTEM SID (S-1-5-18) from address LocalHost (Using LRPC) running in the application container Unavailable SID (Unavailable). This security permission can be modified using the Component Services administrative tool.
diagnose the kernel power event id 41 error I've been receiving. Upgraded to Win 10 on day 1 of launch 7/29 which the Event Viewer tells me was the date of my very first kernel power related crash.
I've updated most of my drivers by now and while the crashes are now less frequent, still occurring about once a day
My PC is often waking from Hibernate or sleep mode and I'm struggling to work out why. Is there a way of finding out what the cause is in event viewer?
I have an SP3 running Windows 10. Finding this continuous error in the event viewer?
DistributedCOM Event ID 10010 The server {7006698D-2974-4091-A424-85DD0B909E23} did not register with DCOM within the required timeout.
I looked up the ID in the registry and came up with a REG_SZ, REG_DWORD, and REG_BINARY. One of the descriptions said "Out of proc server to enable Insider Hub and Feedback App scenarios to be reached from inside of its appcontainer".
Task Scheduler service found a misconfiguration in the NT TASKMicrosoftWindowsMedia CenterRegisterSearch definition. Additional Data: Error Value: %SystemRoot%ehomeehPrivJob.exe.
Upgraded from 8.1, finished installing all W10 updates and I was looking in the App History tab in Task Manager and I saw this :
I need to say that I checked for updates in the Store App and it downloaded 2 updates for 2 unknown apps, as there wasnt a name and picture so I could identify those specific apps.
the task manager always states that my CPU is at 100% and various applications are using a huge amount of power. Sometimes it'll say skype is using 54%, other times chrome same thing, sometimes even jumping to 70%. But coretemp reads perfectly normal 15% on cpu or roughly that. Some things to note, I only noticed it after installing drivers for my elgato HD60 pro, and while using skype, starting a screen share would stop the glitch for a while. So needless to say, I'm not sure what it is. It could not be the drivers because that's only when I noticed it.
Oh, I should also note that I have re installed windows 10 about 4 times to come to the same problem. Checked malware and everything. Official ISO from media tool as well.
In task manager on the app history tab I have a listing called Uninstalled Processes. In has used about 58 minutes of Cpu time since I cleared the history about a week ago. how I can find out what the uninstalled processes are or any info on this at all
This problem has persisted since upgrading to windows 10.
I play games with steam. If a game gets frozen or hung up I would normally use task master to end the program. Now when I bring up task master I cannot see it. It appears to be running in the background but the game screen itself is still on top. I've tried ALT TAB but the screen will not toggle.
