Computer Sleeps / Wakes Fine Manually But Won't Wake From Auto-sleep
Oct 10, 2015
My motherboard is a P8Z77-V, with Gigabyte 7950 video card, if that matters.
I did the windows 10 upgrade, and all seems well, except waking from Standby.
If I go into start menu, and choose sleep, everything spins down, and the computer shuts itself off. I am assuming this 'sleep' is some sort of hibernate.
But when I leave the computer over night I come back and the monitors are off,but lights on tower on. I am assuming this is standby mode? Anyway, I can't wake the computer from it, using mouse or keyboard (both USB). Clicking power button on tower does nothing. I generally have to click the reset button on tower and do a full boot sequence. When I log in, I do not get a message about windows not shutting down properly (maybe that message is no more in 10?), but clearly it is a fresh desktop.
I reset all bios settings, and update to most recent bios. I have the latest graphics drivers.
Here is some investigating I did, hopefully it works:
Code:
D:UsersShea.Wilbur>powercfg /aThe following sleep states are available on this system: Standby (S3) Hibernate Hybrid Sleep Fast StartupThe following sleep states are not available on this system: Standby (S1) The system firmware does not support this standby state. Standby (S2) The system firmware does not support this standby state. Standby (S0 Low Power Idle) The system firmware does not support this standby state.
Code:
C:WINDOWSsystem32>powercfg /sleepstudyS0 Low Power Idle is not supported on this machine. Cannot run tool. BIOS settings to check?
View 1 Replies
Similar Messages:
Aug 3, 2015
Upgraded to Windows 10 and now the computer wakes itself from the sleep. I have already disabled network adapter, mouse and keyboard from waking the pc. I have also disabled scheduled tasks from being able to wake the computer.
View 1 Replies
Sep 3, 2015
I've searched the board and found many similar problems to mine, but nothing exactly like it, and as such I haven't been able to fix it.
When put in sleep mode, my computer automatically wakes up at a set time.
I have disabled wake timers in the power menu, I have clicked of "allow [this device] to wake up the computer" on every applicable device (mouse, keyboard, HID-compliant device, NIC...)
Here's what the CMD-prompt says about armed devices:
As for the wake timers themselves:
since this a Windows process I can't just shut it down.I can't seem to find it in the Task scheduler though...
View 2 Replies
Sep 25, 2015
Each morning when I wake up, my computer is on, rather than in sleep mode, as I left it. I have disabled the power of the mouse to wake it.
View 9 Replies
Nov 5, 2015
I am on 10565 Pro version though this occured in last build too. Whenever I come back to my pc in the morning after putting it in hibernate mode for the night my airplane mode is always on. I notice it first by my bluetooth mouse being disconnected and then wifi connectivity.
The one fix I tried is unchecking the allow to shut off option to save power under device manager properties for my wifi adapter.
Using a Dell XPS 9343
View 8 Replies
Oct 5, 2015
Title says it all. After waking from sleep mode the computer disconnects from the internet and I have to reboot to get a connection. Makes the whole point of having a "sleep" mode useless. This is annoying because often I go away from m y computer for a few hours during the day and don't want to have to reboot to get back onto my computer. Rebooting wears out the components and is uneccessary when it should simply wake from sleep mode with no hassles. I have a wired connection via ethernet cable. My router is always switched on.
View 4 Replies
Nov 2, 2015
We have been using at home wireless logitech keyboard and mouse K270 and M505 respectively. All have worked great and have been using the unifying software. Since upgrading to Windows 10, I have been losing the pointer when my computer wakes from sleep or is unused for a length of time. Whilst I agree this definately looks like a window glitch. I have done all the usual things like refreshing drivers, new batteries etc.
View 1 Replies
Oct 8, 2015
I've bought a completely new ASUS VivoPC that comes with these specifications: [URL]....
My problem with this computer is that it will not always wake up from sleep mode, especially during longer sleeps over the night. Normally I press a button and it turns on immediately, but sometimes my keyboard and mouse refuse to respond and my computer sleep indefinitely until I press the power button behind the PC. I know that the computer is still sleeping because the strip of light in front of the computer starts blinking every time I put it to sleep, and there is no change in its behavior when it won't startup normally. After booting it up it puts me right where I was before putting it to sleep like nothing happened.
I have updated windows 10, BIOS and all my drivers except for the newest GeForce drivers because version 355 and 358 gives me a BSOD (Driver Power State Failure) that loops on startup indefinitely. The only way to fix it is to revert back to 353 through safe mode or use system restore point. I have already written an extensive post about it here for more details: [URL]....
I have also tried formatting my PC several times, but the problem still persists even on a brand new install. The PC is only two weeks old so I should still have my warranty in check. Despite the two problems I really like the PC. I have other VivoPC's that works perfectly, but they do not have both intel and NVIDIA graphic drivers. So I have been suspecting that these cards conflict somehow.
View 1 Replies
Aug 9, 2015
I hear the computer turn back on and the light is on, but the screen is still black. My mouse and keyboard are unresponsive (can't turn backlight on). I have to do a hard shut down. When it's back on, it's like it woke up from sleep mode, not a fresh restart.
This just started happening today I think so I did a system restore, but the problem persists. The only thing I remember doing today was updating my ATI drivers.
View 9 Replies
Sep 18, 2015
Every time my computer's monitor goes to sleep, on awaking the computer will BSOD with "kernel security check failure" or the screen will not turn on and reboot the PC.
FIVE-Fri_09_18_2015__83806_71.zip
View 6 Replies
Jan 4, 2016
Once the computer goes to sleep, I can't wake it up without rebootingÂ
View 19 Replies
Oct 17, 2015
Windows 10 keep re-sizing my firefox windows when i wake up my computer from sleep. And the windows 10 start menu is also opens up. I would like to fix both these issues.
View 1 Replies
Jul 29, 2015
I upgraded to Windows 10 and now I cannot wake up my computer from sleep mode. With Windows 7 and 8.1 all I had to do was tap any key and the computer would wake up. Now that doesn't work. I have to press and hold down the power button to force a shut down and then restart. This problem only appeared after I installed Windows 10. How can I fix it?
View 19 Replies
Oct 6, 2015
I have an HP pavilion g6 notebook laptop computer. I have recently upgraded from Windows 8.1 to Windows 10. I had occasion to put my computer to sleep! I had been working on my college courses for a few hours, when I needed to take a break. I put my system to sleep, but when I returned to complete my assignments my computer would not turn on! It went to an off black screen, and locked up! When at sleep the power indicater blinked, which indicates that it was in sleep mode.
When I tried to awaken my Pavillion it locked up, and the only way to regain control was to manually force it to shut down (i.e. hooded power button down.) thinking this may be due to system clutter I cleaned both user disc & system files using the Windows disk cleaning function, found through the control panel, looked for both HP updates, and Windows updates.
Later I again tried to awaken my machine after putting it to sleep, and had a repeat in the inability to awaken it! A third and the last time I tried to awaken my PC from sleep I noticed that for some reason, and somehow the indicator light was solid, the screen black, and I heard my computers fan running!
View 2 Replies
Aug 9, 2015
When I put my computer in sleep mode, it won't 'wake up'. I have to manually turn off the computer and then start it up again. This has happened twice. I'm not putting it into sleep mode until I find out what's wrong and that's exasperating as I normally leave my computer on all day so I can periodically play my games.
View 4 Replies
Sep 9, 2015
When finished my work, I choose "Sleep" in the power options. Then, when I want to work again, I hit the mouse or any key, even "escape" amd it doesn't "wake up". After 2-3 minutes, I turn the machine off and re-boot.
View 4 Replies
Jan 3, 2016
I did the conversion from Windows 7 to Windows 10 about 1.5 months ago. This is a Dell Vostro w/Intel Corei5 desktop
All was fine until I attempted to wake the computer from sleep mode recently and got the following error.
An operating system was not found. Try disconnecting any drives that don't contain an operating system
Press Ctrl+Atl+Del to restart
I disconnected the two external drives I had connected and tried again with the same result.
On startup, I've hit F12 to run through the Dell ePSA Pre-boot system assessment and it passes all the tests System, Cables, OS boot Path, Hard drive, cd rom drive, video card, cpu fan, system fan processor and memory.
I have the original 7, 64 bit installation disks, but nothing for Windows 10. What's the best way to get this thing going again?
View 9 Replies
Oct 4, 2015
When I wake up my computer from sleep mode I have to go to the bios to reset the boot drive?
View 1 Replies
Mar 13, 2016
Rig only a few weeks old and I noticed for the second time now when my computer is left alone for awhile it acts like it's in sleep mode but mouse and keyboard don't seem to be waking it. I fixed it last time by just restarting computer...
View 1 Replies
Aug 11, 2015
I had installed Windows 10 for over a week now. The issue of windows not sleeping after sleeping once after startup from a shutdown has been going on for a couple of days.
I've been through many of the power options that deal with what devices wake up the computer, and I have turned them all off at one point which did not work, Windows 10 still refused to sleep properly after sleeping once.
I've went to power options and made sure that the sleep button makes the computer sleep, but it still refuses to sleep after it slept once. I'm really unsure where to solve this, and I don't think this issue has been addressed with Windows 10 yet. Perhaps this is a bug?
View 1 Replies
Nov 23, 2015
My computer goes to sleep when I unplug my headphones-not always, but often. This does not happen for other devices such as my mouse or earphones.
View 1 Replies
Aug 3, 2015
today my desktop went to sleep mode, and i had problems waking it up, i didnt know how to do it.Whats the default way to do this in a desktop pc? And even better if its possible, i would like to be able to wake pc by mouse clicking, is there any posible way to do this?
View 1 Replies
Oct 20, 2015
After installing Windows 10 a while back I began seeing a "Your computer is low on memory" error... this error only appears after the computer goes to sleep and is woken up, and never happened on Windows 7 or 8.1. Nothing has changed except for the os
The os is on 250gb ssd with 164gb of free space. I have a second ssd that I install software to (Autodesk, Adobe, etc) and it has over 150 gb of free space. There is a 1tb hd for general storage which has over 500gb of free space
When the "Your computer is low on memory" error occurs windows says it needs to shut down programs to save memory, this causes any program that's open to stop responding and crash. Also, when this happens one of my monitors typically freezes up (usually monitor 2) and the default playback device for my sounds (monitor 3) gets changed and I can't hear any audio until I restart the computer.
After a restart everything seems fine. None of this happened until I installed windows 10...
View 2 Replies
Jan 28, 2016
So as the title says, every now and then Windows 10 randomly decides to wake itself up from sleep. It doesn't happen at any consistent time, some days it stays asleep until I actually turn the PC back on. Using powercfg /lastwake just gives me a wake history count and doesn't provide any information.
I can't figure out why this is happening. I've tried googling it and have found similar complaints but no real solution. It's not hardware that is waking it up and I have already disabled the "allow wake" setting for my network adapters in device manager.
View 2 Replies
Sep 9, 2015
i don't want my mouse or touch-pad to wake my laptop from sleep when it gets triggered, I have been to 'mouse settings' & unchecked the part about waking up PC' & i hit apply & OK but no good. Now the touch-pad wont wake it up but my bluetooth mouse still does it. I'm at a lost as to what other settings i missed or if its a bug somewhere.
View 3 Replies
Aug 20, 2015
Post W10 Installation - my computer constantly wakes up from sleep. It just will not stay asleep no matter what, I thought it was my mouse so I went into my device manager and changed it so it didn't have the ability to wake up my computer. It stopped for a little while at least that's what it seemed, must have been coincidence because now its happening again. Which is weird because I went into power settings and turned "Wake Timers" off completely, it's now switched to disabled. Yet whenever I runcmd and type "powercfg -waketimers" as it reccomended here [URL] .... to find out which timers are on.
It says something about volume 2 on one of my hdd's, some stuff that doesn't make much sense to me. If you need me to paste the cmd info you're going to have to tell me how. Also when i type "powercfg -devicequery wake_armed" it lists "HID Keyboard Device" and "HID Keyboard Device (001)." Maybe the latter is what's waking my computer? I figured that was just another name for my keyboard or something, all I want is my computer to stay asleep and only my corsair keyboard to be able to wake it up.
Also everytime it wakes up I type "powercfg -lastwake" into the cmd and it doesn't give me any info. It says "wake history count -1" and the other 2 stats are 0, followed by no text or information. Also I forgot to mention but when it wakes up as of now, the display will actually stay off but the computers lights and everything are on. Whereas before when I thought it was the mouse waking it up, the whole computer would turn back on, display and all.
View 9 Replies
