Computer Booting Into Black Screen With No Cursor

Sep 21, 2015

Today, Windows 10 decided to act up.When I turn on my computer, it boots my UEFI interface, the Windows 10 loading screen with the spinning dots and then a black screen with no cursor.

It's not my 7870 or monitor as I tried it using the motherboard graphics and my other monitor.

In Windows 10's troubleshooting menu, System Restore won't work because of some file being deleted.Startup Repair requires a successful boot to enable Safe Mode, which I can't.Resetting with all files intact gives me the same result.Rolling back to Windows 7 is impossible due to Windows 10 deleting all my Windows 7 files.

What do I do aside from formatting?I need the files inside that HDD.

View 1 Replies


Similar Messages:


Booting To A Black Screen And White Cursor

Jan 8, 2016

My PC has been acting up for about a week now. I have 2 Samsung 24inch Monitors and a decent gaming PC. I have tried all the options this forums has brought to me such as control alt delete and recovery mode, nothing has worked so far. I have just upgraded from 7-10 and it just wont start up without booting to that black screen.

View 2 Replies

BSOD :: Black Screen With Blinking Cursor Bar Before Booting Into Window Just After BIOS Page

Nov 8, 2015

I recently upgraded to window 10 from window 7 with iso file. I didn't had internet access then, but my window run successfully. Later, when i tried to attach another display with Laptop it did not detect it. So, i installed the windows updates. But after installing i was unable to boot into windows. A black screen with blinking cursor appears right after the Dell Logo. I am only able to go into bios setup by pressing F2, no safe mode option. I tried making a bootable Pen drive for repair but even it wasn't detected. I already change the boot priority in bios menu. Therefore i am unable to fresh install the window as laptop cd drive is not functioning from quite some time.

View 3 Replies

Computer Booting To Black Screen - Other Times It Will Boot Normal

Feb 10, 2016

My laptop is running windows 10 32bit pro and ever since upgrading, the computer boots to a black screen but there are other times it will boot up correctly....

View 1 Replies

After Upgrade Computer Goes To Black Screen With Only Cursor Showing

Aug 17, 2015

After the Windows 10 upgrade my computer goes to a black screen with only the cursor showing and nothing else shows....

View 1 Replies

Freezing / Black Screen / No Cursor And Monitor Goes To Sleep But Computer Still Running After Upgrade

Sep 18, 2015

Freezing, black screen, no cursor, monitor goes to sleep, computer still running after upgrading to Windows 10 from Windows 7. Must manually force computer shutdown. HP desktop.

View 1 Replies

Booting Into Blank Screen With Mouse Cursor Only

Jan 4, 2016

I currently have a Windows 10 laptop that was working without issues for a while, however after a restart the laptop appears to load windows but never get to the login screen, only show a blank screen with only a mouse icon visible.

I have tried various Windows supplied options with the following outputs:

1. Boot into safe mode (with and without network) - this again only loads to a blank screen with only mouse icon visible
2. Window reset - appears to get stuck on 8% - only to show an error saying reset could not happen, reverting changes (option to reset with files saved was chosen - as current files are required)
3. Start Up Repair - issue not resolved
4. System Restore and System Image Recovery - N/A as Windows cannot find previous image or restore point
5. Booted in Low-Resolution video - again same

View 4 Replies

Booting To A Black Screen

Jul 30, 2015

If you have an on board Intel graphics controller as well as an add on graphics card, windows thinks you have one more monitor connected than you actually have. so when windows loads its outputting the video signal to a bogus monitor.firstly wait long enough so the mouse cursor to appear when you move the mouse.(blank screen with a white mouse cursor).Then press the space-bar and enter your login password or pin (yes your doing this blind)

You should now be logged into windows.if the desktop dose not appear after 30 seconds then press WindowsKey-P down arrow twice and enter.

View 9 Replies

Installation :: Black Screen Of Doom But Booted To Login Screen (no Cursor Just Blank)

Jan 18, 2016

I did a bit of research and this seems to have been an issue for a while, or has been in the past. Was upgrading to windows 10, I first had to restart my pc cause it was initially stuck on that preparing to install problem with the green bar being stuck around 25%.

It then got through that and began the installation process with the big circle and rebooting process. However around 91% when I last looked at it it was just black screen, this stayed this way for about 3-4 hours. I then decided to reboot the pc and it has now booted to the login screen. Is this a known bug or could there be a possible issue?

The problem seems a bit different as some people I saw have had to fall back on PC restore points etc. So not sure if it installed or what could be the problem.

Also side note, I upgraded my pc when windows 10 first publically released, but rolled back because I had about 5min shutdown times.

View 2 Replies

Booting To Black Screen After BIOS

Nov 17, 2015

I was using Windows 7 for about 2 years until I stumbled upon Windows 10 last month.I upgraded to it and used it happily for 2 weeks,give or take.Then the problems occur.

One day,after loading to BIOS,it booted to a black screen.No login screen,no cursor,nothing.I tried using the Windows troubleshooting utility and I've exhausted every option besides the wipe all your data option.

I tried booting with cmd, but it didn't do anything.Resetting PC with files intact also did nothing.Startup repair was the same case.System restore did not let me roll back due to some technicality.

In the meantime,I've tried installing Windows 10 on my other HDD,only to face the same issue after I rebooted.The Windows Media USB also did not work.

I'm really out of options here as I need to get some of my files out from my Caviar Black before I reformat it if I have to.

EDIT:For context,I sold my SSD and got a Caviar Blue 1tb.

View 1 Replies

Black Screen No Cursor

Dec 26, 2015

I cant find a fix to my computer with my Nvidia graphics card here's what happened.

- Windows 8.1 update to windows 10 happens.
- Successful upgrade so i start up games to see changes into fps.
- Graphics card is not working so i uninstall them and try to reinstalled them again but to no avail ( should have restarted my PC i know).
- Get message to start restart on safe mode and so i do so.
- Suddenly I receive a black screen to which after many attempts to fix it via online including the installation media flash drive and the start+P key bind whatever thing.

I am not able to play my games, talk to my family and study for my ISU for my school which i need now because the work is inside! I need to fix this but am running out of options.

Also i wouldn't say am bad with computers I do know how to get to control panel, run commands on cmd, etc. But some detailed course of action explaining what do would useful.

Any link on how to downgrade to windows 8.1 or even 7 would be useful but not necessary, don't want my computer updating something I don't know.

View 2 Replies

Black Screen With Cursor After Welcome

Jul 30, 2015

I tried to upgrade to windows 10 from 8.1 and i tried 3 times and all I get is BLACK SCREEN after logging in task manager won't work, so i cant check is the explorer.exe isn't working or what. Also the same thing on safe mode black screen with cursor and nothing else.

View 1 Replies

Drivers/Hardware :: Black Screen At Booting

Sep 8, 2015

I have a Samsung laptop. I had Windows 10 for about 2 weeks and everything was fine until last week. When I press the power button, the Windows 10 icon appears with the loading icon. After that, I'm getting a black screen for about 3 minutes then my login screen appears and everything is fine after that.I thought it may be something corrupted with my OS so I decided to reinstall Windows 10 from scratch and not to keep my files and programs. I found out yesterday that this wasn't the solution to my problem because I reinstalled it and it keeps making it again.

View 2 Replies

Black Screen When Booting Laptop After Upgrading

Jul 30, 2015

I have a dell insperation and after having upgraded to windows 10, I came across a few issues. The update when well and windows 10 is working on my laptop, however, I have an issue where I am presented with a black screen when i start my computer. I do see a dell screen and a windows boot screen before it goes black so i know the issue is not a hardware issue, however after the windows boot screen passes (the one with the blueish window icon) the screen goes to black, but it is still on (meaning the monitor is still turned on just not displaying anything). The reason i know that windows installed fine is that external monitors do work, just not my laptop monitor. I have already reinstalled windows 10 and have made sure all my drivers are up to date. Windows 10 is just not recognizing my laptops screen as a usable monitor.

View 9 Replies

Black Screen Even When Booting From Install Media

Feb 3, 2016

I did an update a week ago and after that Windows 10 will boot to black screen without cursor.

When booting I get sometimes "Automatic repairs", I see the initial logo. After some minutes the screen goes back and that's it.

When I try to boot from an USB the same happens - I cannot get even to re-install Windows. The USB works on another PC just fine.

I booted from Linux and deleted the hiberfil.sys file, checked all the partitions of the disk (in this case SSD) with GParted- no issues.

I really don't know how to get even to the advanced options and try to reset or run command prompt. 

View 8 Replies

Black Screen With Cursor After Doing SFC Scannow

Oct 16, 2015

Earlier on my Win 10 computer I did a command prompt, sfc scannow. So I waited for the scan which fixed a problem/corrupt file.

Afterwards it said computer needed restarting so I did just that, but after the windows logo the screen just stays black with the cursor showing.

Ctrl alt del to bring up task manager etc does nothing at all. Tried simply restarting pc again but it's the same every time.

Solved - On a different computer I downloaded the Windows 10 ISO file and burned on to a blank DVD.

I got into the BIOS to change the boot order to CD/DVD first, then inserted the dvd. (you DO get the option to keep or delete your files) The Repair option didn't work, but using a Restore Point did. My files-documents, pictures etc WERE kept.

View 9 Replies

Installation :: Screen Goes Black And Can Only See The Cursor

Aug 23, 2015

I've been having some issues to get Windows 10 installed. I've got an ASUS ROG G20AJ desktop computer running an i7 processor and a GTX 760 graphics card. I got my Windows 10 update and everything went fine, and the installation process began. The problem is, when it gets to the 32 % of"Installating drivers and features", the screen goes black and I can only see the cursor. The installation process won't complete and it's been like 8 hours now. What should I do??

View 2 Replies

Screen Went Black And Cursor Appeared

Jul 29, 2015

My Windows 10 was running perfectly well for one full week. Then this morning I noticed it installed some update and after reboot the screen went black and the cursor appeared.

I tried every thing but nothing worked. I cannot even access the troubleshooting, bios, repair, etc... Nothing.

After it reboots I noticed that if I type my password blindly the HDD LED starts to blink wildly as in loading my start up programs etc....

But nothing else happens when I try Ctrl-alt-del or win-r and type explorer.exe or whatever I can think of.

View 6 Replies

Installation :: Black Screen With Cursor

Jul 30, 2015

Installed the 'Windows 10 Login Screen Changer' that I found on this forum, clicked 'change background' and bam...black screen. I turned the computer off and on again and still black screen with a Cursor.Ctrl Alt Del does nothing. My keyboard still lights up, and pressing Windows + P brings up the project menu but doesn't solve the issue. Forgot to mention I'm running the newest build of Windows 10 and have been for several weeks without any problems.

View 1 Replies

30-60 Second Black Screen With Cursor On Boot?

Aug 29, 2015

This has been happening ever since I upgraded to 10 about 2 weeks ago. I start the computer, 3 second ASUS logo, then windows 10 logo comes up and it loads for about 10-20 seconds, then I get a black screen with a cursor for 30-60 seconds, followed by another loading screen and finally the login screen. About the same boot time I had on 7 except for the long black screen. I can move the cursor around during the black screen, and it sometimes has the blue loading circle next to it. I've tried disabling fast startup and my video drivers are up to date.

Device manager doesn't show more than one display adapter, but it does show 4 monitors if I show hidden devices. My BenQ monitor in DVI-D and Generic PnP monitor, which is my TV plugged into the DVI-I port on my 770, and then a hidden copy of each of those. I usually have the TV off with display on my BenQ, but windows seems to think the BenQ is the second monitor, calling the TV the PC screen when I check windows key + P. I don't know if that's relevant or not, but it caused a problem during my win10 install (windows switched to the TV display mid-install.) I tried switching the display ports while booting up but I still had the black screen.

View 9 Replies

Installation :: Black Screen Without Cursor

Aug 9, 2015

I installed Windows 10 yesterday and I had kept my laptop on power and I went away for a bit and when I came back a couple of hours later, my laptop's screen was black but the lights on the laptop blinked so as to show that it had just restarted. So I waited for it to start, however the screen is black and there's absolutely nothing happening.

I googled the problem and found that people could see a cursor or a pointer on their screen but it's not coming for me. Also, my laptop is a 2 year old Dell Inspiron 14z. I need to access my computer, I have to travel in a week. Also, I was updating from Windows 8.1 to Windows 10, and I don't have any CD for Windows 8 as it came pre-installed with it, with the shopkeeper telling me that Windows 8 comes installed in the BIOS so there's no CD. Anyway, I really need to access my laptop asap? I have got absolutely no clue as to what I should do.

View 3 Replies

Black Screen With Cursor After Logo

Sep 8, 2015

I have installed windows 10 on my computer a month ago and it worked well , but now i have a problem : the pc load , windows 10 logo appears then black screen and the cursor appears ... I havn't changed anything in my configuration nor installed any new software and no upgrade ..

View 14 Replies

Black Screen With Cursor After Login Or Log Out?

Dec 28, 2015

Whenever I log in, or out, there's a black screen with a cursor that can't move...

View 2 Replies

Temporary Black Screen With Only Cursor

Oct 4, 2015

I am using a windows 10 pc.

Specs = 4gb Ram Intel i5 4210U.

Problem = When I boot up my pc after logging in and entering my password , i get a black screen with only my cursor. After 30-60s the screen flickers and everything becomes normal and works fine.

View 1 Replies

Black Screen On Startup With No Cursor

Aug 14, 2015

I recently tried to reset Windows 10, but it wouldn't let me. So I started up my pc after and now it's just a black screen. Before all this I was trying to fix my nvidia drivers, and someone recommended me to reset Windows and now Windows won't even start.

View 1 Replies

Black Screen No Cursor During Boot

Jan 9, 2016

Specs:
-Intel I7 4790K (NOT OC'D)
-250gb Intel ssd (boot and os)
-16gb Hyper x ram
-1tb seagate barracuda (games etc...)
-750w evga supernova psu
-HIS amd r9 290x (liquid cooled)
-Asus Z97K Mobo

Occasionally when I power on my computer it shows nothing but a black screen no cursor. Assuming its the gpu or display connection but hey could be something else. I switched over from HDMI to display port. I usually end up having to pushing the reset button on my case and it boots up perfectly fine. Just bugs my really badly when I have to boot to a black screen and having to push the reset button every time, the asus loading screen doesn't show either.

View 1 Replies







Copyrights 2005-15 www.BigResource.com, All rights reserved