Computer Booting To Black Screen - Other Times It Will Boot Normal
Feb 10, 2016
My laptop is running windows 10 32bit pro and ever since upgrading, the computer boots to a black screen but there are other times it will boot up correctly....
View 1 Replies
Similar Messages:
Aug 4, 2015
My PC crahes and BSOD at randowm times, no pattern to it really.
I also sometimes have problems booting the pc, it just hangs on a black screen and will only eventually boot if i turn it off and back on.
Attatched the crash file
View 2 Replies
Sep 21, 2015
Today, Windows 10 decided to act up.When I turn on my computer, it boots my UEFI interface, the Windows 10 loading screen with the spinning dots and then a black screen with no cursor.
It's not my 7870 or monitor as I tried it using the motherboard graphics and my other monitor.
In Windows 10's troubleshooting menu, System Restore won't work because of some file being deleted.Startup Repair requires a successful boot to enable Safe Mode, which I can't.Resetting with all files intact gives me the same result.Rolling back to Windows 7 is impossible due to Windows 10 deleting all my Windows 7 files.
What do I do aside from formatting?I need the files inside that HDD.
View 1 Replies
Jan 13, 2016
When I boot up my computer (to windows 10). It will do the Asus splash screen then instead of going straight to windows if does this black screen with the kinda terminal thing (with no writing/text) then goes on to windows. Does this affect my computer?
View 1 Replies
Jan 13, 2016
I have to boot 2 times to get my computer started. This started when I upgraded to Windows 10.
View 1 Replies
Jul 30, 2015
If you have an on board Intel graphics controller as well as an add on graphics card, windows thinks you have one more monitor connected than you actually have. so when windows loads its outputting the video signal to a bogus monitor.firstly wait long enough so the mouse cursor to appear when you move the mouse.(blank screen with a white mouse cursor).Then press the space-bar and enter your login password or pin (yes your doing this blind)
You should now be logged into windows.if the desktop dose not appear after 30 seconds then press WindowsKey-P down arrow twice and enter.
View 9 Replies
Nov 17, 2015
I was using Windows 7 for about 2 years until I stumbled upon Windows 10 last month.I upgraded to it and used it happily for 2 weeks,give or take.Then the problems occur.
One day,after loading to BIOS,it booted to a black screen.No login screen,no cursor,nothing.I tried using the Windows troubleshooting utility and I've exhausted every option besides the wipe all your data option.
I tried booting with cmd, but it didn't do anything.Resetting PC with files intact also did nothing.Startup repair was the same case.System restore did not let me roll back due to some technicality.
In the meantime,I've tried installing Windows 10 on my other HDD,only to face the same issue after I rebooted.The Windows Media USB also did not work.
I'm really out of options here as I need to get some of my files out from my Caviar Black before I reformat it if I have to.
EDIT:For context,I sold my SSD and got a Caviar Blue 1tb.
View 1 Replies
Sep 8, 2015
I have a Samsung laptop. I had Windows 10 for about 2 weeks and everything was fine until last week. When I press the power button, the Windows 10 icon appears with the loading icon. After that, I'm getting a black screen for about 3 minutes then my login screen appears and everything is fine after that.I thought it may be something corrupted with my OS so I decided to reinstall Windows 10 from scratch and not to keep my files and programs. I found out yesterday that this wasn't the solution to my problem because I reinstalled it and it keeps making it again.
View 2 Replies
Jan 8, 2016
My PC has been acting up for about a week now. I have 2 Samsung 24inch Monitors and a decent gaming PC. I have tried all the options this forums has brought to me such as control alt delete and recovery mode, nothing has worked so far. I have just upgraded from 7-10 and it just wont start up without booting to that black screen.
View 2 Replies
Jul 30, 2015
I have a dell insperation and after having upgraded to windows 10, I came across a few issues. The update when well and windows 10 is working on my laptop, however, I have an issue where I am presented with a black screen when i start my computer. I do see a dell screen and a windows boot screen before it goes black so i know the issue is not a hardware issue, however after the windows boot screen passes (the one with the blueish window icon) the screen goes to black, but it is still on (meaning the monitor is still turned on just not displaying anything). The reason i know that windows installed fine is that external monitors do work, just not my laptop monitor. I have already reinstalled windows 10 and have made sure all my drivers are up to date. Windows 10 is just not recognizing my laptops screen as a usable monitor.
View 9 Replies
Feb 3, 2016
I did an update a week ago and after that Windows 10 will boot to black screen without cursor.
When booting I get sometimes "Automatic repairs", I see the initial logo. After some minutes the screen goes back and that's it.
When I try to boot from an USB the same happens - I cannot get even to re-install Windows. The USB works on another PC just fine.
I booted from Linux and deleted the hiberfil.sys file, checked all the partitions of the disk (in this case SSD) with GParted- no issues.
I really don't know how to get even to the advanced options and try to reset or run command prompt.
View 8 Replies
Aug 8, 2015
What does it mean when you see a black screen that has a grey flashing dash located at the top left-hand corner of the screen? It moves down a bit before finally moving onto the Windows 10 logo, where it sometimes gets stuck and reboots (and the grey dash screen appears again before moving on).
I noticed this issue both during upgrade (when it failed and tried to recover the installation) and after installation. This issue occurred on an Acer Aspire Z5801. It does not occur on Windows 7.
View 2 Replies
Nov 8, 2015
I recently upgraded to window 10 from window 7 with iso file. I didn't had internet access then, but my window run successfully. Later, when i tried to attach another display with Laptop it did not detect it. So, i installed the windows updates. But after installing i was unable to boot into windows. A black screen with blinking cursor appears right after the Dell Logo. I am only able to go into bios setup by pressing F2, no safe mode option. I tried making a bootable Pen drive for repair but even it wasn't detected. I already change the boot priority in bios menu. Therefore i am unable to fresh install the window as laptop cd drive is not functioning from quite some time.
View 3 Replies
Jun 15, 2015
After several weeks of testing I'm ready to go full on Windows 10 and want to get rid of Windows 7 but I have some partitioning issues I want to clean up. I currently have Windows 7 on drive 0 (360 GB) and Windows 10 on drive 1 (500 GB). Both are SATA drives and RAID is enabled in the bios but not active.
What I think I'd like to do is simply swap the drives physically so that Drive 0 has my current Windows 10 install on it and make it primary boot active etc. The drive with Windows 7 on it would become drive 1 and I would delete the Windows 7 partition and re-partition it with a clean empty partition just for extra space.
Second question, any advantage to using this drive configuration in a RAID setup?
View 9 Replies
Oct 14, 2015
Recently my computer as began to crash into black screen with only my mouse visible, when I try to restart my laptop it comes up with the Acer logo then when it should go to the login screen it just black screens with mouse
View 2 Replies
Sep 10, 2015
CPU/GPU: AMD A10-7850K
MOBO: MSI A78M-E35
SSD: SanDisk Plus 120GB
RAM: EVGA 8GB 2133MHz
PSU: EVGA 80+ 430W
Monitor: Acer G237HL bi
I installed Windows 7 Home Basic and did all Windows updates; this went fine. Reserved Windows 10 and downloaded/installed it when it was ready; this went fine. Once in Windows 10, tried to "reset this pc" by choosing "remove everything" and "just remove my files"; this went fine until doing a restart after reaching 100%.This issue being the "inaccessible_boot_device" error that many others have gotten which causes the PC to enter a restart loop.
Well, during this loop I made the (apparent) mistake of turning off my PC. Now, I can't even boot my PC at all. I get a black screen. I can't use the Windows 7 disc, can't use my MOBO disc, can't even boot into bios... nothing. All I see when I turn on my PC is literally a black screen with nothing on it. What can be done to fix this? I've read that putting Windows 10 on a USB by using the Microsoft media creation tool and booting from that to clean install works, but if I can't even boot from the Windows 7 disc, how can I boot from a USB? And I can't even enter BIOS to force a USB boot.
Okay, my PC will now boot into the "inaccessible_boot_device" error blue screen and does the restart loop. Not sure what I should do now. I'm afraid to power off my PC again.
Not sure why, but I was finally able to boot into BIOS. My only guess would be that, maybe when I tried(but failed) to remove my MOBO battery, just from me wiggling it caused it to reset? Idk.
Anyway, once in BIOS, I changed boot priority to DVD and was able to access reinstalling Windows 7.I am right now reinstalling Windows 7, on Disk 0 Partition 2(if that matters. wouldn't even allow me to install on partition 1 or 3).So, from the looks of things, everything is back to normal? I should be able to finish reinstalling Windows 7, do the updates and redownload/reinstall Windows 10 without issue? Though, this time I will NOT attempt to "reset this pc".
I'm back into Windows 10. So, I'm still not sure why I was finally able to boot into BIOS, but once I was able to, I changed DVD boot drive to top priority and was able to reinstall Windows 7 from the disc. I then did all Windows Updates. I then downloaded the Windows 10 ISO and mounted/installed it with Virtual Clone Drive.ng.
View 1 Replies
Aug 29, 2015
This has been happening ever since I upgraded to 10 about 2 weeks ago. I start the computer, 3 second ASUS logo, then windows 10 logo comes up and it loads for about 10-20 seconds, then I get a black screen with a cursor for 30-60 seconds, followed by another loading screen and finally the login screen. About the same boot time I had on 7 except for the long black screen. I can move the cursor around during the black screen, and it sometimes has the blue loading circle next to it. I've tried disabling fast startup and my video drivers are up to date.
Device manager doesn't show more than one display adapter, but it does show 4 monitors if I show hidden devices. My BenQ monitor in DVI-D and Generic PnP monitor, which is my TV plugged into the DVI-I port on my 770, and then a hidden copy of each of those. I usually have the TV off with display on my BenQ, but windows seems to think the BenQ is the second monitor, calling the TV the PC screen when I check windows key + P. I don't know if that's relevant or not, but it caused a problem during my win10 install (windows switched to the TV display mid-install.) I tried switching the display ports while booting up but I still had the black screen.
View 9 Replies
Jan 27, 2016
So recently I have been getting very long boot times, not sure how long as after 20 mins I get bored and walk off. After silly amount of time trying to boot it comes to a black screen with a mouse curser. Ctrl + alt + del does not work but I found pressing start + r and typing explorer.exe makes everything work. I installed some Intel drivers other day while rooting my tablet, maybe this is the issue?
View 1 Replies
Aug 30, 2015
For two years I have had three hard drives installed. One small one went bad and at bootup I would get that information with "Press F1 to resume" which I would do and then windows would load. I upgraded to windows 10 from 7 three weeks ago, same message, and no problem, as it would still go right into windows. Last week I noticed windows update had a list of important updates. I believe I also had an nvideo GeForce driver update which I am sure I did first without problems.
When I did the windows updates and had to restart, I noticed I had a slightly different look but it still took me to the same press F1 to resume. However, the result was it went to a totally black screen with a tiny band of the new windows blue across the top and in the middle of the screen it said WAIT, not in windows type but in the same script when you first begin booting computer. It just remained there and there was no activity taking place, no blinking red light or solid red light like my computer always does. After at least 20 minutes of no activity I rebooted with the same result. Repeating the F1 kept giving the same result, and further reboots and then the F1 caused the computer to reboot maybe 2 out of 5 tries instead of directly going to the black screen. At one point I quickly saw something where I believe it askd to press tab or possibly delete and then gave an option to press F1 or F2. I am not sure which I pressed but it did go into windows and everything was fine for the rest of the day. I let my computer on but at some point overnight it had rebooted and back to the press F1 to resume which results in back to the black screen WAIT and this is where I am at again (I am using a different computer to send this). A
View 1 Replies
Jan 9, 2016
Specs:
-Intel I7 4790K (NOT OC'D)
-250gb Intel ssd (boot and os)
-16gb Hyper x ram
-1tb seagate barracuda (games etc...)
-750w evga supernova psu
-HIS amd r9 290x (liquid cooled)
-Asus Z97K Mobo
Occasionally when I power on my computer it shows nothing but a black screen no cursor. Assuming its the gpu or display connection but hey could be something else. I switched over from HDMI to display port. I usually end up having to pushing the reset button on my case and it boots up perfectly fine. Just bugs my really badly when I have to boot to a black screen and having to push the reset button every time, the asus loading screen doesn't show either.
View 1 Replies
Jul 30, 2015
My computer went to a black screen again after installation, but after waiting for a while my computer fell asleep and I went to wake it up and the black screen was gone. I still get the black screen after I restart, but I just press the power button on my laptop, put it to sleep and then I press some button (any) and it's fine.
View 9 Replies
Feb 1, 2016
I have a Windows 10 pc I have never had problems with I was playing wow just now and the screen went all black and the computer kept running. The monitor said no connection found despite being connected to the tower that was still running. Naturally I tried restarting the computer manually. Now turning it back on nothing happens; the blue power button blinks orange; and makes a very loud clicking noise. This happens even when the power cord is plug in and you don't touch any buttons. I opened my pc and cleaned the fan still nothing.
I have a video Windows 10 pc problem - YouTube
View 9 Replies
Jan 1, 2016
When I turn on the computer windows won't start. It starts to load then I just get a permanent black screen, which doesn't change until I boot the system, then it happens again.
View 11 Replies
Jan 7, 2016
Acer laptop running 10 Home fully updated.
Turn the power on and the computer boots very quickly to a very dark black screen. I can just make out the desktop but not clearly enough to do anything. Power off then on again and it boots correctly but very slowly.
View 2 Replies
Feb 23, 2016
All was good and well, until my Windows 7 on another drive gave me an NTOSKRNL.EXE error (fixed now). My Windows 10 booted fine at this point, but after entering my password, it was stuck on "logging in" for quite some time. I forced a reboot, and then I was stuck in the "Performing Automatic Repair" loop.
I eventually got out of this, only to be greeted by a "BAD_SYSTEM_CONFIG_INFO" BSOD. After replacing files from RegBack, I managed to get it to boot, but now I just see a black screen with no cursor. I've tried logging in and I had Chrome Remote Desktop but that didn't work either.
It's really not okay for Windows to just mess up randomly. The NTOSKRNL error from the other drive COULDN'T have caused this problem.
View 5 Replies
Dec 31, 2015
I installed Windows 10 yesterday but had to return back to Win 7 because the driver problems crashed the whole system. Basically what happened was that I was stuck at black screen after every boot and got back only when going to sleep-mode through power button and back.
I tried to uninstall all graphic drivers but it doesn't really work when Windows is reinstalling them immediately. I though that I would only use my Nvidia and downloaded the latest drivers and after that disconnect from Internet but the driver installation just crashed the whole system. When I rebooted it crashed again so only thing I could do was to boot in safe mode and go back to Win 7.
View 1 Replies