So I have a Lenovo touchscreen but i don't have the touchscreen part, I was using it but then it crashed, and now it wont accept USB drives, and my keyboard and mouse install into the computer via USB what do i do.
I recently purchased support from reimage. It was fixing problems then asked to restart in safemode. Now I can't get in because it says incorrect password. Im connected to the internet but it says it isn't....
My Lenovo PC suddenly shut down today and when I restarted it I got a BSOD with a 'bad pool header' message. I did eventually restart but soon shut down again with a 'k mode exception not handled' message. Now when I restart I get a blue page 'RECOVERY Your computer could not start properly. A required device isn't connected or can't be accessed. Error: 0xc0000225.'
I have a windows 10 system repair disk but when I try and boot from it I get 'non system disk or disk error'.
I recently (2 weeks ago) replaced the hard drive because the old one was showing SMART errors. I cloned the old disk to an identical disk and it seemed to be going fine until today. Not sure quite what to do next.
I had updated to Windows10 a couple weeks ago. Everything was running smoothly until my most recent NVidia gfx driver update. It seemed to stall at 99% completion and then I lost the sound to my computer.
After numerous attempts to fix my sound I decided to just restore my computer and wipe it clean. Big mistake.
Again upon 99% completion of the restore process my computer crashed and then entered an infinite loop and booting and loading to a screen that would say "innaccessable boot driver".
This seems to be a common problem with windows10 and people who restored or wiped their computer, they all got the same error message I did. Except the fixes that have worked for them aren't working for me.
I have even purchased a fresh copy of windows 8 and a new SSD in attempt to remedy this but to no avail. Even after removing my other SSD's and keeping only the new one in, it now loads to a screen that says "reboot and select proper boot device, or insert boot media in selected boot device and press a key".
I have tried messing around in the bios but nothing I do seems to work.
I have a MSI g45 z87 gaming mobo Gtx780 Kingston ssd
On 28/12/15 switched computer on and it went straight into Windows 10 updating, then came up with box saying "update fail", clicked on that and it then kept bring up different disc failures. Now stuck in blue screen which takes me into auto repair which then comes up with PC did not start correctly and gives different options : restart option throws me back to blue screen, troubleshoot advanced option - system restore won't give me any dates so have to cancel out, system image recovery - can't find any images, start up repair - takes me back round auto repair back to blue screen, command prompt - haven't the foggiest what to do here, go back to previous build - ran into a problem and won't be able to take you back.
My computer has been fine with no issues what so ever but today it crashed and then when it booted back up it would do the windows 10 loading screen and everything else but when it got to the login screen it just goes black,you can still use the Mouse and win+P still shows the side bar on the screen but the rest is black.
I recently bought a toshiba satellite c-55 laptop, as soon as i got it i upgraded to windows ten. i do not know if the usb ports worked before my upgrade, but they do not work now. i tried to download drivers but nothing has worked.
I know i have power to the usb's because my usb hub lights up when i plug it in. the device manager says the usb's are working but they are not. Is there a way to see if it is a hardware problem?
I have 3 flash drives that, for some reason, no longer function regardless of which USB port they are attached to. They display as if they are ready but indicate "not responding" as soon as I try to access them. I see message "not migrating" under Events in their properties. This is a problem that has just arisen. I've been running Windows 10 since official release.
few days ago I installed Windows 10 pro from Windows 7 ultimate. Since installation of Windows 10 my keyboard and mouse remain powered after shut down PC(lights on). I have never had this issue before on W7.
After upgrading to windows 10, my mobo USBs will all disable... Why is this happening and how do I fix it? this makes my wifi mouse and keyboard stop working...
So I got a new asus M5a97 for a new socket and whatnot and now when I shut down there are 2 issues (title bar not long enough for both). The first is whenever you shut it down it leaves all usb ports powered.
The second is that every second time you try to boot it goes to the asus screen where there's meant to be the little circle made of dots spinning and no circle appears nothing happens. Hardware all seems fine so not sure what needs changing.
I uninstalled Windows10 on my laptop, now it cannot start up again, it was showing launch repair and says it cannot do it automatically. =Won't accept user name or password on recovery .
i'm trying to set up cortana but every time i want to set it up it says this: i saw on some video' s that there has to be a button called: "i agree" but its not on my computer/
I installed Windows 10 on my laptop 2-3 weeks ago at which time I was prompted to create a PIN for easier log-in. I've been using the PIN every day since. All I've had to do is type the 4 digits (no enter) and I get signed in.
Then last night when I tried to sign in, nothing. I enter the 4 digits, and after the 4th digit, the cursor jumps to the front of the PIN characters and doesn't sign me in. I tried Enter which does nothing.
I also tried the alternate "Log on using a password", and it does not accept my password either, which I did not change.
I called Microsoft support and they told me I need to "refresh my computer", meaning reinstall Windows, which is absolutely ridiculous, as it boots up fine and has been working fine. The OS locked me out of it!
I have a brand new HP laptop that I started for the first time last night. I set up a password and name but when I restarted the computer this morning it would not accept my password which I know is correct.
I reset my boot using a command prompt, so that it would next boot into safe mode.
However at the flash screen which requests my PIN, it now says my PIN is incorrect and so I cannot complete the boot at all, either in safe mode or otherwise!
I was hoping to use safe mode to investigate why Devices and Printers hangs without reaching any display - but now I am completely locked out of the computer.
It is a 3.6GB desktop running Win 10. I have just previously run scannow to check that system files are OK, and found no discrepancies.
My hp envy now wants a password, after not needing one when I chose the button to not require a password in the windows settings. Now it won't accept any password, even after I went into microsoft account on another computer, got a code, updated password. Still won't accept password. I am not tech savvy, and just need to get into my laptop!
So this is a original windows 8.1 unit. G585 lenovo. All drivers update from windows update but the wifi driver keeps showing realtek inside of windows 10 but it is a atheros. I have the proper driver but because the date is prior to the windows 10 driver it keeps trying to use it will not accept it.
When i was editing my new YouTube video on Windows Movie Maker on my Windows 8 tablet Acer Iconia W700(I5 Core/4GB RAM) and i stupidly kept ignoring the low RAM warning signs telling me to close Movie Maker so when i gone in to full sceen mode everything went completely blank(dark) and nothing was there on the sceen.
So i waited when the battery died and charge it and i tried to boot up the tablet and i saw the Acer logo(and the loading thing) but after it stays on the blank(dark) page, nothing is coming up now, it won't go to the lock sceen and the CPU fan is always going on and off as well, i can't do a single thing on it now. . and will doing a hard reset get it all back to normal again??? Has the hardrive failed or is it something else?
I recently updated my windows 10 pc. Now when i try to open any app it just crashed right away doesn't matter if its a windows app or not. I tried doing a system restore and that didn't work. It wont even let me reset my computer it just says something went wrong. It runs fine in safe mode so it has to be something running. I have tried end process for everything and its still not working.
I managed to get an upgrade to Windows 10 Pro on my Windows 7 machine, with it waiting to install. I did not wish to do this! I additionally managed to get it to not install and my updates no longer show it as available. I did also manage to get an ISO for later use. I wish to delete the crashed install and it's files, such as the $Windows~* stuff shown below ....