-Disable power from waking with my LAN, Keyboard & Mouse
-Look at powercfg -lastwake but it shows wake source count - 0
Event log shows power-troubleshooter wake source: Unknown
Event log shows this 1 second after I press sleep: "The system firmware has changed the processor's memory type range registers (MTRRs) across a sleep state transition (S5). This can result in reduced resume performance."
I thought it was because my time is syncing with network time, but I disabled the sync time automatically
I also checked my power plan to make sure nothing wakes the computer up, and I don't have automatic updates on. It's really annoying when you go to sleep and after about 15minutes the computer boots back up from sleep.
I upgraded from windows 7 to Windows 10 Home 64-bit; this was never an issue on Windows 7. Basically I cannot find a way to keep my desktop in sleep mode. Multiple times it has turned on in the middle of the night, and pretty much every time I leave for the weekend I come back to find it turned on.Windows updates seem to be the issue, but lately I haven't been able to confirm this (though the notification always seems to be there when I login). I get the following when I try lastwake.My guess is that there are no details because I have Windows notify me instead of automatically updating.
I also have wake timers disabled.I thought maybe my mouse or keyboard could be the issue (though I've never had a problem with them in the past). I disabled HID-Compliant Mouse from device manager.And I unchecked the box which allows my mouse to wake my computer. After testing it out, this appears to have had no effect as my mouse can still wake the computer when I click it.
I have had windows 10 since the Insider program started but I never needed to use sleep until now. But whenever I put my computer to sleep it wakes up 30 seconds later. I have made sure that my network card, keyboard,mouse and controllers aren't allowed wake the computer. How can I stop my Computer waking up?
So upgraded from 8.1 Pro. I never had any problems with 8.1 other than the occasional crash here and there, but nothing exceptional. Now every time that I try to wake the computer from sleep I get a stop message that states that it tried to write to read only memory.
I have run memtest86 overnight with 7 iterations and it passed them with no errors. I ran a burn test on my CPU to see if it was overheating, with it never going above 63 degrees Celsius even on the most extreme test.
The crashes are not random. They only happen when I try to wake the computer from sleep. However, it looks like what is causing them is random.
I have never overclocked my computer and I have never touched the frequencies with the memory.
I have a weird error using Windows 10: I cannot change / adjust brightness at all. I have the latest updates for every drivers, programs and all, not sure why the system does this. Sometimes the screen brightness is 100%, sometimes just 50%. Not sure if the Catalyst Control Center is to blame, but I really need a quick solution, and until now I found none.
Just to preface this I have not received a BSOD when this happens so I hope I'm still posting this in the correct location. However my laptop just freezes completely and I have to do a hard shutdown (holding the power button until it shuts off) whenever I wake my laptop up from sleeping or even when I cold boot it.
I have checked Event Viewer and I see that I have a couple of recurring errors, the first being:
"DCOM got error "1084" attempting to start the service lfsvc with arguments "Unavailable" in order to run the server: {08D9DFDF-C6F7-404A-A20F-66EEC0A609CD}"
Wit the second being:
"The Computer Browser service depends on the Server service which failed to start because of the following error: The dependency service or group failed to start."
However I am able to boot into safe mode just fine, even safe mode with networking and everything behaves normally. I can't for the life of me figure out what is going on ...
I forgot to add that I did the upgrade from Windows 7 originally and had the problem so I figured it might have been an issue with the upgrade itself causing some kind of problem so I did a clean install of Windows 10 Pro on it and the issue still existed afterwards as well.
C:UsersNOTREALNAME>net use m: sclientstorage System error 87 has occurred.
The parameter is incorrect.
C:UsersNOTREALNAME>copy /Y m:dinner.exe
The system cannot find the drive specified.Obviously I have not included the actually user account name. My client is a long-time subscriber to Norton, and I would imagine his system is as tight as Norton can make it.
Just to preface this I have not received a BSOD when this happens so I hope I'm still posting this in the correct location. However my laptop just freezes completely and I have to do a hard shutdown (holding the power button until it shuts off) whenever I wake my laptop up from sleeping or even when I cold boot it.
I have checked Event Viewer and I see that I have a couple of recurring errors, the first being:
"DCOM got error "1084" attempting to start the service lfsvc with arguments "Unavailable" in order to run the server: {08D9DFDF-C6F7-404A-A20F-66EEC0A609CD}"
Wit the second being: "The Computer Browser service depends on the Server service which failed to start because of the following error: The dependency service or group failed to start."
However I am able to boot into safe mode just fine, even safe mode with networking and everything behaves normally. I have tried a clean install as this started happening after doing the upgrade from Windows 7 so I figured a clean install would clear up the issue if it was an issue with it upgrading.
My Acer keeps waking up around 3 to 4 in the morning. I've tried resetting the time for updates which worked for only one night.
I've followed a complicated maze of disabling programs which made the pc switch on at around 10pm but, after 3 days it brought me right back to square one.
Now I'm seeing on the device manager that most all my programs wake the pc up at around 4am.
I could also close the screen but that will erase all my tabs which is why putting the pc on sleep mode is my only option.
After upgrading to W10 my pc keeps waking up from sleep mode. I've disables the reboot and scan in to wake the pc in task scheduler, I removed the wake on lan, mouse and keyboard from waking it in device manager, and I've disabled what I can in power management. It still wakes up a few minutes after going into sleep mode..
I always put my computer to sleep at night before bed, after I installed W10 whenever it wakes up I get a grey screen with the number 90 in the bottom right corner.
Both my tablets are requiring a password after waking from sleep. I have set everything I can think of to not require it, but it still asks. I am signing in with my live account, is that why?
Since I upgraded to windows 10 from windows 7 my pc every night wakes its self from sleep mode. I did the command prompt and it said a wake timer was waking my pc, I have been unable to find a wake timer. How to fix this?
i am having a strange issue with my windows 10 pro version, It was working fine until the 3rd cumulative update. Now my lap never goes to sleep. When i sleep the laptop it goes to sleep and then automatically wake after 30 to 40 sec, and sometimes even 4 to 5 minutes. I have troubleshooted the power option, removed all the scheduled events but nothing works. On searching the command prompt with powercfg lastwake command it shows The POWER BUTTON.
I have windows 10 pro 64 bit. I am running a 120gb SSD for my OS and a 1.5TB HDD for media and games. Whenever I put the computer in standby or sleep mode the HDD is not recognized when the computer wakes up. Upon restart the HDD is recognized and everything is groovy.
Since I bought my new laptop several months ago, it has been waking itself up out of sleep mode. If I leave it in sleep mode overnight, I can be sure that by morning it will be awake. If I'm in uni and I need to slip it back in its sleeve on sleep mode - a couple hours later I will later find the sleeve hot and the laptop awake.
I have tried things such as looking up in cmd propt things that have authority to wake the pc up, but it states that nothing does. I have disabled options on my anti-virus for background tasks. I am just not sure where to go from here as no success so far.
I put my PC to sleep and when I wake it up, I'm getting no display on my monitors although the PC itself wakes up. I reboot the computer and encounter a BSOD "VIDEO_TDR_FAILURE (nvlddmkm.sys)"
I recently updated from Windows 7 to Windows 10. Nvidia drivers have been updated as well.
Whenever my laptop goes to sleep, the only way to wake it up is through the laptop's keyboard (pressing any key on the keyboard). But when I press the USB keyboard or the USB mouse, it doesn't wake up.I use my laptop mostly as a "desktop": I connect it through an HDMI cable to a larger 24" monitor, and the laptop is lying closed in the corner. It is just annoying to open the laptop and press the keyboard.. not a big deal, but if it's possible to change that it will be good !
I'm getting a blue screen advising "ATTEMPTED_WRITE_TO_READONLY_MEMORY" a couple of seconds after my computer wakes from sleep mode. It's not sporadic as it happens every time.
I've downloaded the log collector and attached the ZIP file to this post. First time poster so I hope I've done it correctly!
This issue's surfaced for me since this morning. Whenever I put Windows to sleep, either manually or closing my lid, it shuts down the instant I start it back up.
Recently I have been finding my PC powered up when it should be sleeping. Using powercfg -lastwake does not show a cause but looking at system events I can that there are a series of events each day starting at 08:59:31. One of these is a Power - Troubleshooter event which says that the system has returned from a low power state but Wake Source is unknown. This and the other messages are ones that normally appear if I wake up the PC manually. There are subsequent events from Windows Update so I thought that might be the cause but it does not run immediately and I now believe that it is running because the PC has woken up and is not causing it to wake.
I have checked in Power Options Advanced Settings/Sleep and Allow wake timers is set to disabled.i have checked that on my network adaptor, 'Allow this device to wake the computer' is not checked.I have checked Control Panel/Security and Maintenance/Automatic Maintenance and Allow scheduled maintenance to wake my computer at the scheduled time is unchecked.
I had also checked in Task Scheduler and under WindowsUpdate there are 4 tasks but under Conditions, none are set to 'Wake the computer to run this task'.Checking back through the event logs it seems that this problem first happened on 27th Sep and always happens at 08:59:31. I have looked at the event log for the previous day and can see some events relating to the installation or update of a device driver although I haven't made changes to the hardware for a long time. It is followed by an event relating to Disk 3 which I don't normally have so I assume these were as a result of plugging in a USB device. There are also events relating to a windows update of VCLibs 12. how I can track down the culprit?
