Computer Won't Go Into Sleep Mode Automatically
Dec 19, 2015
My computer won't go into sleep mode automatically. Even when I manually set it to sleep, it will be awake again within 10 minutes or so. I've gone into the advanced power options to make sure that nothing is interrupting it while sleeping and set it so nothing could wake it up. I've checked in the device manager to make sure none of my devices are waking it up.
After it wakes up I'll go into the command prompt and use the "powercfg -lastwake" to see what could be causing it and nothing shows up. There are even times when the computer will turn itself on from being completely turned off.
View 1 Replies
Similar Messages:
Sep 3, 2015
i am using windows 10 since last two weeks..since installation i am facing this issue .. my pc goes into sleep mode without any reason..suppose i am working on anything ..like i am watching you tube videos or anything..suddenly my screen changes to black and my pc then goes into sleep mode..then i press the power button ..and it again resume the windows...i tried everything .like updated the drivers and other settings..but no results .
View 4 Replies
Jan 1, 2016
So, just like the title says, my PC keeps waking after I put it to sleep mode. It probably takes around 10-15 minutes of being in sleep before it wakes up. The reason I'm posting this question is because I have looked up solutions for this and they don't appear to be working.
I've checked my device manager; only my keyboard and mouse are enabled to wake my PC. I ran, powercfg -devicequery wake_armed, in my command prompt to make sure that only my keyboard and mouse are the only devices.
I disabled wake timers in the power options and ran, powercfg -waketimers, to see if there's waketimers. There aren't any.
I also ran, powercfg -lastwake, after my computer woke up automatically. I didn't take a picture of it but it said ther was a wake history count of 1 but it didn't state what was the source of it waking. I thought that was strange so I put it to sleep then woke it up with my mouse. Checked again with that command prompt and this time it specified the source which was my mouse obviously.
OS: Windows 10
View 1 Replies
Sep 27, 2015
This happening right after i instal 10 on my laptop. Its about 5-10 mins after my laptop sleep then its shut down automatically.. And i believe there is nothing problem with power & sleep settings.
View 1 Replies
Jan 25, 2015
It is fitting that I should start this discussion on the new Win10 site. With the latest update to 9926, I finally got the sleep menu to show up (updating the graphics driver) but the computer will not automatically go to sleep at the appropriate time. The other versions worked. I doubt this will last as I expect more updates to fix this but so far, the usual suspects have been tried and it is non functioning.
The sleep button and the power button set to sleep work fine. So far, nothing has woken it up but I have a sneaky suspicion that Homegroup now wakes up the computer when another machine asks for its shared folders.
View 9 Replies
Aug 31, 2015
I set my computer to sleep after 25 minutes, and it worked until the day before yesterday. Since then it just doesn't go sleep automatically but I can put it into sleep mode manually. I guess I might installed something that doesn't let it sleep. But I only installed Origin in the last days, and it's not even running.
View 1 Replies
Sep 3, 2015
I've searched the board and found many similar problems to mine, but nothing exactly like it, and as such I haven't been able to fix it.
When put in sleep mode, my computer automatically wakes up at a set time.
I have disabled wake timers in the power menu, I have clicked of "allow [this device] to wake up the computer" on every applicable device (mouse, keyboard, HID-compliant device, NIC...)
Here's what the CMD-prompt says about armed devices:
As for the wake timers themselves:
since this a Windows process I can't just shut it down.I can't seem to find it in the Task scheduler though...
View 2 Replies
Oct 24, 2015
After I upgraded to Windows 10, my system won't go to sleep automatically. The display will turn off after the idle time I've set but the computer remains on. I've tested with setting it to sleep after being idle for 1 minute, and only the display turns off. If I manually go to Power -> Sleep in the Start Menu, it will go to sleep.
View 9 Replies
Aug 8, 2015
my computer is not going in sleep mode even my settings are in sleep mode.
View 1 Replies
Aug 16, 2015
We updated from 8.1 to Windows 10 and now the computer will not go automatically into sleep mode.
View 2 Replies
Oct 6, 2015
My computer will not go to sleep at all unless it is in safe mode without networking (the monitor does sleep then). When I boot it into safe mode with networking, it will not go to sleep (the monitor will not sleep). When I boot normally into Windows 10 (clean install; up-to-date as of today with Windows Update), the computer does not sleep.
Also, sometimes before when I login after a normal startup, the computer does go to sleep; however, nothing displays on the monitor after I press the power button to bring it out of sleep. I tried disabling the "wake" feature for the network adapter (as suggested in another thread), but that did not work at all. My computer's specifications are:
Operating System Windows 10 Home 64-bit
CPU Intel Core i7 2600K @ 3.40GHz Sandy Bridge 32nm Technology
RAM 8.00GB Dual-Channel DDR3 @ 665MHz (9-9-9-24)
Motherboard Gigabyte Technology Co., Ltd. H67M-D2-B3 (Socket 1155)
Graphics ASUS VS239 (1920x1080@60Hz) / 2047MB NVIDIA GeForce GTX 660 (PNY)
Storage 465GB Seagate ST3500418AS ATA Device (SATA) / 298GB Western Digital WD My Passport 0748 USB Device (USB (SATA))
Optical Drives ATAPI iHAS424 Y ATA Device / HL-DT-ST BD-RE UH12LS28 ATA Device
Audio NVIDIA High Definition Audio
View 9 Replies
Feb 23, 2016
When I click on the Power app and choose Sleep, my computer always wakes up halfway through the night. I tried customizing the power settings but no luck.
View 1 Replies
Mar 21, 2016
My computer goes into sleep mode after a minute or so despite the settings I have used for same.
View 1 Replies
Oct 28, 2015
i have custom built computer more than able of handling just about any game with a
SAPPHIRE Radeon R9 290 100362-3L 4GB video card
Rosewill RX850-S-B - Xtreme Series 850-Watt power supply
G.SKILL Ripjaws X Series 16GB (2 x 8GB) 240-Pin DDR3 ram
MSI 970A-G43 motherboard
Seagate Barracuda ST1000DM003 1TB 7200 RPM hard drive
and a amd fx6500 3.5ghz cpu
along with 5 case fans and a fan controller to keep it cool. now onto my problem when ever i do anything demanding like play a game it will run fine (with varying time but typically at least a hr) then at some point with no warning it will go into for a lack of a better term (not really sure what to call it) partial sleep mode. the led on the front of the tower will flash as if in sleep mode yet i can still hear everything else working (the hard drive fans everything) but i will lose picture.
The only way to get it out of this partial sleep mode is by completely unplugging (i have tried hitting the power button which typically wakes it up from regular sleep, hitting the reset button moving the mouse everything one would typical do to wake it up from a regular sleep mode and it does not work the power supply needs to be turn off and then turn back on). Thinking that something was getting to hot i run a whole bunch of monitoring software (cpuid and rainmeter) the cpuid i run on a second screen so i can constantly monitor temps and nothing seems to be running to hot the hottest i have seen my cpu and gpu get is like 65c.
I have tried to replicate it by ruing a cpu and gpu stress tester (separate hoping that if one cause it then i know where the problem and together) with no luck of replacting even after running them for like 12hrs straight. Just a few more thing no i am not overclocking i have 5 case fans 1 pulling in through the front 1 blowing out through the back and my cpu fan run by the mother board and 1 on the bottom pulling up and 2 on the top blowing out run by a fan controller which i set to manual and set all the fans to 100%. my cpu is about 2 years old and all the other parts are less than a year old. and i have Kaspersky antivirus which i ran multiple time with nothing found. it did it both when i had windows seven and when i upgraded to windows 10.
View 1 Replies
Jan 26, 2016
My computer (an Asus Republic of Gamers) shuts down when in sleep mode. More precisely, I put it in sleep mode (in 1-2 seconds), but when I open the lid or press a key on the keyboard to wake it up, it starts from scratch, as if I had shut it down.
I tried deactivating Intel Management Engine Interface in the Device Manager as I saw it could be a reason for my problem, but it doesn't solve it. I reinstalled Windows from scratch (from a USB key) and the problem is still there.
I only have the computer for less than a month and I think it worked fine at the beginning.
View 10 Replies
Mar 15, 2016
I have a custom PC I built myself. The computer runs flawlessly while playing games or using my computer in any way. I'm having a problem though that I cant find anywhere. When my computer goes into sleep mode by its self and I come back to it later it will just be on a pale blueish screen and occasionally a pale orangy screen and it wont let me do anything. The only thing I can do is hit the reset or power button, and once its back on everything works great until it sleeps again on its own. I don't even know if its a hardware or software problem.
View 1 Replies
Aug 15, 2015
I have clean installed windows 10 on my Zenbook (UX31LA) and i have problem with the sleep mode, when i enter sleep mode (either way) my screen turns off and the power led blinks (normal so far), but when i wake the computer up, I see the "Asus" logo and it loads the sign in screen and all my work is gone. it looks like it stats from scratch and it takes about 8 sec (like stat from power off).
View 3 Replies
Jul 29, 2015
I upgraded to Windows 10 and now I cannot wake up my computer from sleep mode. With Windows 7 and 8.1 all I had to do was tap any key and the computer would wake up. Now that doesn't work. I have to press and hold down the power button to force a shut down and then restart. This problem only appeared after I installed Windows 10. How can I fix it?
View 19 Replies
Sep 18, 2015
The store we went to sold us a computer they had on display. They didn't reset the computer and left their administrators on the computer. I've installed google chrome office 365 and downloaded documents but when it sleeps or when i've restarted the computer everything "saved" is gone. Will reverting back to a previous system as suggested here [URL]
View 5 Replies
Oct 6, 2015
I have an HP pavilion g6 notebook laptop computer. I have recently upgraded from Windows 8.1 to Windows 10. I had occasion to put my computer to sleep! I had been working on my college courses for a few hours, when I needed to take a break. I put my system to sleep, but when I returned to complete my assignments my computer would not turn on! It went to an off black screen, and locked up! When at sleep the power indicater blinked, which indicates that it was in sleep mode.
When I tried to awaken my Pavillion it locked up, and the only way to regain control was to manually force it to shut down (i.e. hooded power button down.) thinking this may be due to system clutter I cleaned both user disc & system files using the Windows disk cleaning function, found through the control panel, looked for both HP updates, and Windows updates.
Later I again tried to awaken my machine after putting it to sleep, and had a repeat in the inability to awaken it! A third and the last time I tried to awaken my PC from sleep I noticed that for some reason, and somehow the indicator light was solid, the screen black, and I heard my computers fan running!
View 2 Replies
Sep 22, 2015
My computer won't go into sleep mode if it's been on for a while. It will go into sleep mode if it's freshly booted. Whenever I check, powercfg -requests is clear. Currently, powercfg -requestsoverride shows process: chrome.exe display system awaymode, driver: filesystemsrvnet system. When it won't go into sleep mode, it won't even automatically turn off the monitor. My settings are set to allow sleep.
Ideally I would like a fix for this, but I would also be okay with some kind of program that puts my computer into sleep mode after 30 minutes. I used to have such a program a long time ago, but I have forgotten the name of it, and googling 'sleep timer' just shows sleep mode tutorials. Googling 'powercfg requests is clear but computer won't go into sleep mode' hasn't been particularly useful, either.
View 7 Replies
Jan 18, 2016
It looks like my computer was logged on by someone during that time of audible beeps. I have only had Win10 a few days. I am using a hard wired modem. Event id 4624. It shows login, but it was NOT me. I had the power cord removed when it was logged on, but not my ethernet cord. I need to remove the ethernet cord every night too? I am using Win10 firewall.
View 2 Replies
Dec 7, 2015
My computer will go to sleep after 30 minutes, as scheduled, but only if I have not signed in to my user account. Once I sign in, it will not automatically sleep, and the monitor will not dim.
What processes are likely to be interfering with sleep? I can put it into sleep manually, and it will stay asleep. but it won't do so automatically, if I am signed in.
View 5 Replies
Nov 5, 2015
I am on 10565 Pro version though this occured in last build too. Whenever I come back to my pc in the morning after putting it in hibernate mode for the night my airplane mode is always on. I notice it first by my bluetooth mouse being disconnected and then wifi connectivity.
The one fix I tried is unchecking the allow to shut off option to save power under device manager properties for my wifi adapter.
Using a Dell XPS 9343
View 8 Replies
Oct 16, 2015
Recently I have noticed that my computer is EXTREMELY SLUGGISH after I wake it up out of sleep mode. It runs very very slowly. Rebooting is the only thing that fixes the sluggishness but then it happens again once my computer is put to sleep and then wakes up.
My computer is an Alienware Area 51 R2. I upgraded to windows 10 about a month ago without any problems. I have the Hibernate feature turned off as the files required to preserve my computer state during hibernation take up far too much space on my tiny 120 GB SSD that windows is installed on (all my games and other stuff are installed to the 1.5 TB standard platter-based hard drive) Sleep function remains enabled though.
I have a pair of NVIDIA Geforce GTX 980 graphics cards and am using the latest graphics drivers with them (358.50 according to the latest update i got).
Defragmenting (and in the case of SSD, trimming it) have not worked.
View 7 Replies
Aug 9, 2015
When I put my computer in sleep mode, it won't 'wake up'. I have to manually turn off the computer and then start it up again. This has happened twice. I'm not putting it into sleep mode until I find out what's wrong and that's exasperating as I normally leave my computer on all day so I can periodically play my games.
View 4 Replies
