I have sound from the speakers, but not from the headphones.
I've tried the headphones on my phone and they work, so it is the PC.
It's like the headphone jack doesn't work, but I have suspicions that it's about the drivers.
In the sound settings/playback devices, the speakers appear, but not the headphones.
I have Lenovo Y510P and upgraded to W10 64bit.
It has no sounds and has an red X where the icon is.
I hear that my laptop isnt W10 compatible but there must be someone out there using it on W10.
What driver can I use?? I have tried the driver for 8 and 8.1 but it changes nothing.
I've got a little issue, whenever I plugin headphones (usb) I dont get sound and the sound is still going through speakers, I didn't had problem with this until the latest update on Windows, its really annoying cause everytime I want to switch to headphones I need to restart my PC. Yes I checked sound settings, the headphones are there when I plug them, there's just no sound.
View 2 RepliesI'm experiencing sound issues in Windows 10. What happens is my laptop speakers work fine, I plug headphones in and they work fine, then I unplug the headphones and I don't get audio anymore - it used to seemlessly switch back to my laptop speakers. I've been having no trouble with this in windows 10 since upgrading until today. I tried reinstalling the sound card driver - that didn't work. Once it gets stuck on the headphones all I can do to reset it to my speakers is to go to the device and properties > advanced > reset to default (I noticed all this does is change the bitrate in the dropdown).
View 1 RepliesRealtek HD Changing Jack output reassignments ( FIX ) - I found this old thread but Its not useful because my regedit index doesn't look the same as theirs.
I don't have a "DevType_0888_SS147b1083" or "DevType_0885_SS18490890" folder in "HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{4D36E96C-E325-11CE-BFC1-08002BE10318}000Settings"
Mine is named "Drv7541_DevType_0889_SS10438418" and I don't know which files I'm supposed to edit there.
This is what it looks like....
Today, I reset my computer after struggling to get Kaspersky Internet Security reinstalled. After the reset, I was able to get it installed, but I have run into another issue (surprise, surprise). Sound does not output through headphones as it should.
The drivers are up to date (IDT High Definition Audio Codec and AMD High Definition Audio Device) as they should be. Windows even detects that my headphones are connected, but sound does not go through them unless I use the sound control panel to test the audio. Look at the screenshots for further details. It lists my headphones as the default communication device, and where it lists the speakers/HP option, it lists that as the default device. I cannot list the communication headphones as the default device, only default communication device.
Audio works through the speakers. Audio goes through the speakers even with headphones connected. The only time audio comes through the headphones as it should is when I test audio through them in the control panel. The headphones work just fine, and this issue did not exist before I reset my computer.
Headphones not connected:
Headphones connected:
Device Manager:
Yesterday Windows 10 updated and now my Aune T1 Mk2 USB DAC is no longer working. It shows up in the device manager and is recognized and the audio is switched to be playing through it, however there is not sound whatsoever in my headphones. I have tried a different pair of headphones and there was no change, still no sound.
View 1 RepliesI am having audio problems that I have been unable to resolve. My pc specs and problem below. So since I upgraded to Windows 10 one of the biggest things that annoys me is when I plug in headphones they are not picked up by my pc and I have to manually switch to them as default audio using the Playback devices menu. On Windows 7 I had a Audio Control panel that popped up and detected the headphones.
I am also having issues with the volume sounding low throughout and terrible call quality on skype not sure if this is a separate issue, I have tried manually updating, removing & reinstalling the audio drivers from the device manager and also tried downloading the realtek windows 10 drivers. None of these have seemed to work, I have tried software that detects out of date drivers to no avail and also made sure other components on my pc are updated incase this somehow worked.
PC Specs :
POWER SUPPLY - atx power supply stp 650watt
MOTHERBOARD - asus P8B75-M LX
Ram - 8GB
CPU - Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz
GPU - NVIDIA GeForce GTX 660
Harddrive - 1TB Operating
[Code] ....
I recently updated to Win 10, and the first thing I noticed was that the sound settings were weird. Both speakers and headphone sounds work perfectly fine, but they don't automatically switch when I plug/unplug the headphones. I have to manually go into sound and set one device or another to default.
View 9 RepliesI have recently installed window's 10 and have only recently discovered a program called realtek HD Audio manager. I would like to have separate audio through speakers and headphones, but the realtek only allows me to hear audio through one audio source. is there a way to separate the two so i can have audio (music etc) and have Skype run through my headphones. this problem only occurred after installing windows 10.
View 1 RepliesSound comes through perfectly fine on my laptop's built-in speakers. However, when plugging my headphones into the 3.5mm headset jack, there is no sound whatsoever. The system recognizes that my headset is plugged in. In fact, the microphone on my headset functions perfectly when plugged in, but the headphones themselves are outputting no sound.
I tested the headphones on other computers and devices, and they work. In Device Manager, the device is listed as "Realtek High Definition Audio". However, the only sound device listed in Control Panel is "DTS Audio Control Panel".
I've tried uninstalling the audio device from Device Manager, and then reinstalling the driver from Realtek's website. However, this is met with the exact same results... no sound through the headphones, and "DTS Audio Manager" is installed in the Control Panel instead of Realtek HD Audio Manager.
If I navigate to Control Panel -> Sound -> Playback, "Headphones" is not listed as a device. Instead, Speakers/Headphones is listen as the sole device. Also, I ran DirectX Diagnostic Tool, and it returned absolutely no errors.
Model: HP ZBook 17 G2
OS: Windows 10 Pro 64-bit
I have an HP laptop, and my sound card is (displayed using PCIutils for Windows):
Code:
Intel Corporation 7 Series / C210 Series
and I am finding difficulties in getting stereo sound from analogical headphones (plugged in with 3.5mm jack). Drivers downloaded from HP or Realtex do not work, drivers supplied by Windows (although they are Realtek drivers as well) sometimes work, I mean: speakers and headphones are shown together at the mixer, and sound from headphones is not stereo. I then go to device manager, audio input and output, and uninstall "Speakers/ Headphones". I then reboot with my headphones plugged in, and, after that, the sound is stereo, and (IIRC) the mixer distinguishes between headphones and speakers.
But then things get broken back soon: one time, the windows updated the sound driver, and no stereo sound again. I uninstalled the device, rebooted, and stereo back. Then I unplugged the headphones, and windows said that no speakers were found: I restarted the audio device, speakers were found again, but stereo broken again.
I have a laptop - Asus GL551JW-DS71.
My speakers work fine but when I plug in my headphones, I can't hear any sound from the headphones. The headphones do work as I use them for my desktop.
I have tried updating the sound drivers from the device manager.
I have tried removing the drivers and redownloading the audio drivers from Acers website.
I have tried 'installing' audio driver with the default windows 10 audio driver instead of the realtek one.
I have tried adjusting the sample rate in the advanced properties tab.
What can I do to get sound working in my headphones again and not just the speakers.
After a successful upgrade from Windows 7 to Windows 10 I discovered that YouTube would not play. Fixed the video problem by running in compatibility mode .. BUT then noticed there was no sound from either speakers or headphones on my laptop. No Windows sounds, iTunes, nothing worked. Could this be a setting inadvertently turned "off' somewhere ? Up until I got YouTube working the sound was fine with Windows 10. I just don't know where to look to rectify this. Rebooting etc doesn't make any difference. I don't suspect a hardware fault, it must be an OS corruption or something.
View 3 RepliesMy default configuration is powered speakers connected via the optical output on the ZXR. So in control panel, the S/PDIF is my default device. I'd like to be able to also switch to headphones without having to change control panel sound settings. Is there a configuration that enables me to do this? It seems as if I can't have the s/pdif output my default if I want to use headphones. I'm on Windows 10 with latest software updates.I switched to using the analog outs from the ZXR and not taking advantage of the D/A converters built into my powered speakers (Vanatoo). Not the optimal situation, but it allows me to switch from speakers to headphones without having to go through Control Panel gyrations.
View 1 RepliesI have Realtek Audio HD driver for sound installed on windows 10. For about a week, my laptop ran with no problems. However, last night there was no sound output into my headphones. I unplugged my headphones, plugged them in again. Still no sound.
I tried my headphones on different computers and phones and sound worked normally. I then tried a different pair of headphones on my laptop and no sound was coming out. The speaker is still functioning normally.
I have since restarted my laptop multiple times, and each time I restart a message saying that "You have changed your settings in BIOS setup. Would you like to restart your computer to apply these changes?"pops up.
Sometimes, my headphones somehow come to life, and sound is able to be played. However, when this occurs there is a lot of background static noise, although the sound quality itself is very good.
So this is a original windows 8.1 unit. G585 lenovo. All drivers update from windows update but the wifi driver keeps showing realtek inside of windows 10 but it is a atheros. I have the proper driver but because the date is prior to the windows 10 driver it keeps trying to use it will not accept it.
View 8 RepliesI am currently running the 358.50 version of GeForce drivers, however there are newer ones available (361.43). For some reason when I tried updating, my system got really unstable and eventually blue screened with KERNEL_SECURITY_CHECK_FAILURE. When I rebooted it was fine, until I tried to use a graphics intensive application (Photoshop) that caused my laptop to switch from Intel HD to NVidia. My computer locked up and crashed again. I booted into safe mode and rolled back the driver, but I need to install that driver eventually as I use this laptop for gaming and Photoshop.Maybe another driver needs to be updated?
View 9 RepliesSometimes when I play Hearthstone (which isn't even a super graphic intensive game), the screen freezes for 1-2 seconds before showing this message. figure out what could be causing this?
My computer is a Lenovo Flex 2 running Windows 10.
I just upgraded to Windows 10 on a brand new Lenovo Z50 laptop. It crashes whenever it is not plugged in with the error message THREAD_STUCK_IN_DEVICE_DRIVER ....
I assume there is some driver that I'm forgetting to download that is related to the battery or something?
I have upgraded to windows 10 about a week ago but everytime I turn my pc on, it says HVECK is not supported by this OS. My audio driver is VIA High Definition Audio driver. It seems like they dont have an updated driver for windows 10. What do I do? Can I change to Realtek instead of VIA? I mean is that possible to use a different audio driver? Like, uninstall VIA completely and install Realtek?
View 4 RepliesI installed Windows 10 today, but since installing it, i have had no sound/audio. The only sound driver I have is NVIDIA High Definition Audio, but it cannot be selected as "default device".
View 6 RepliesI'm having an incredibly frustrating issue with my sound where it randomly, for no reason that I can find,- stops working completely. I've reinstalled my audio drivers, ensured they're up to date, I've run chkdsk's and done just about everything short of a reinstall, but no dice.
When the audio breaks, spam-disabling and re-enabling the speaker in Playback devices will occasionally solve it for a few more minutes before it eventually breaks completely again, forcing me to reboot. This happens every once every 20-40 minutes, with no pattern or any trigger that I've been able to find.
The bars in the volume mixer are still moving as if sound is playing, the in-built Windows 10 audio troubleshooter can't find any problems, and my music player keeps playing music etc. as usual. The only indicator that the sound has stopped working (beyond the obvious lack of sound) is that youtube videos get choppy and start stuttering.
Here is what my Device Manager shows in sound and audio; [URL] .... Note that disabling/enabling High Definition Audio and Realtek Audio in various combinations does nothing to fix the issue.
Here's my dxdiag log [URL] .... I'm using Windows 10, and my motherboard is an Acer FMP55
I have an Asus Maximus VI Hero and am trying to download drivers after my clean install of Windows 10. I downloaded the file for my boards audio driver from the asus website but when I ran it the program kept saying it needed to uninstall the previous driver before installing the new one and then restart. It kept restarting and doing that over and over again never actually installing the new driver.
View 1 RepliesI just upgraded my ASUS Laptop from Win 8.1 to Win 10 X64. (It has Via HD Audio)
Initially, sound worked but the microphone didn't. I fussed with many settings but nothing seemed to work.
I uninstalled and reinstalled the drivers, then the mic seems to work but sound doesn't.
Some of the events that I have encountered are: One message said "Windows has detected that Audio enhancements for the following device are causing problems". I disabled all enhancements but nothing changedBased on other posts, I tried to change the default format to 16 bit and other Hz. Nothing worked.I tried to play a test tone in the speaker setup and got the message "Failed to play test tone".I tried to update the drivers but was informed that I had the latest drivers
I went to the VIA web site to look for new drivers but there are none listed for Win 10.
Is there something else that I can do or is it just a matter of waiting for new VIA drivers? (VIA HD Audio is such a common audio chip that I find it hard to imagine that VIA and Microsoft haven't solved the driver problem - particularly given the Insiders Hub process!)
After installing windows 10, I can't hear any sound from my computer, and low volume when play audio files.
View 2 Replies
