Constant Beeping And Loss Of Mouse Control
Aug 17, 2015
Since I upgraded from 8.1 --> 10, I've occasionally been having an issue where my my PC constantly beeps (through the normal speakers) and I lose control over the mouse. URL....Beeping sound is playing through normal speakers, not from inside the tower. I have limited movement of the cursor, but unable to click on ANYTHING.I've been trying to narrow down potential causes, by disconnecting various input devices. One thing to note is that this sometimes occurs WHEN an input device is disconnected or reconnected. These devices include:
-Logitech G502 mouse
-Corsair K70 Keyboard
-Logitech M310 wireless mouse (sometimes used for control of Netflix from my couch)
-Saitek X-52 Pro Hotas (with programming software)
-CH Products Flight Pedals
-Xbox 360 controller
-and another thing-
a program called "SVmapper," which enables the use of the eight otherwise useless buttons on the base of the X-52 Pro's throttle. Normally, those buttons are used to start and stop a small timer built into the throttle, change modes, and generally very useless crap. SVmapper intercepts those button presses and instead outputs a keyboard command to the video game in use. (For example: the x-52 doesn't have enough buttons for me to map essential controls AND landing gear control to the hotas. When I use SVmapper, it gives me 8 extra usable buttons!) [URL] ....
I'm suspecting SVmapper, but I have yet to prove or disprove anything yet. According to my searches, I've heard of a (somewhat) similar problem in Windows 8 related to StickyKeys, FilterKeys, or some other UselessKeys option. I've tried disabling all those, to no avail.For reference, here is my current build: URL...
Only way I can regain control of my PC is by holding the front power button on my tower. I've tried Task Manger to stop processes (doesn't work) and rebooting with ctrl+alt+del (also inoperative). I'm trying to at least make this PC last until I can get a Skylake CPU (+motherboard +appropriate RAM).
View 1 Replies
Similar Messages:
Sep 1, 2015
So ever since I upgraded to windows 10 I have been getting this constant beeping type noise every couple minutes and I can't get it to stop unless I mute the computer completely. I've checked my notifications are all turned off and the only other thing I can think up is something with my Bluetooth because I know my computer has Bluetooth but for whatever reason right now it does't even show me Bluetooth as an option so I can't turn it off and I know I'm not popular enough to be getting that many emails. This noise, I can't get it to stop!
My other quick question is is there a way to change the default search browser for cortana from bing to google. I hate bing.
View 5 Replies
Feb 10, 2016
Since yesterday im having this issue, my mouse starts lagging and beeping and i cant do anything else at the pc, the keyboard still works but if i turn the pc off or try to restart nothing happens, i need to to press the reset button
Is something like this video i found at internet [URL].....
I don`t know if is realted but yesterday i installed the new update at windows update My windows version is the 1511 (10586.122) and my mouse is a Corsair M65 RGB.
View 9 Replies
Aug 1, 2015
I have this constant loading going on somewhere in my computer. it interferes with my games or if I put anything to full screen it automatically pulls it out of full screen and minimizes it. It also interferes with my typing. If I'm trying to type in an address to go to a website the flashing loading will make it so I have to keep clicking in the address bar to finish typing out the address. auto saved usernames are also an issue. where I'll type the first three letters of my username. It will pull up then immediately disappear. I have to be really fast to click it or result to the constant clicking of the username bar to put my username in.
Also an issue with right clicking anything. the right click "open, delete, new folder, etc" will come up and before I can move to click what I want it disappears. I restarted my computer and it went away once. I thought the issue was resolved and paid no attention to it. I then turned my computer off and back on after a virus scan and the problem persists again. I tried turning the computer off and on again but again the problem continues. how I can find whats constantly loading/causing the flashing loading icon next to my mouse?
View 9 Replies
Aug 8, 2015
I used to use Volumouse, but it's not working too well on Windows 10. Are there any alternatives?
View 2 Replies
Oct 28, 2015
My laptop makes a beeping noise that sounds like a 80's laser gun effect.
It's working normally, just it has beeping.
Sound [URL] .....
View 1 Replies
Jan 12, 2016
Continuous beeping noise started after yesterdays win 10 update...
View 1 Replies
Aug 14, 2015
I just have a old Ace Aspire V3-471G with Windows 10 installed . Everything is fine for 3 week . And then one day when i restart a laptop to install some app , I heard very noisy beeping sound . And then Windows 10 starting but then immediately restart again . It keep going on like that. I decide to install old Windows 7 and it start fine although if i connect USB , sometime it will beeping again.
View 1 Replies
Aug 11, 2015
I just recently got a new pc it had windows 8 but i upgraded to windows 10 it was good for a week until today, I tried to boot it up and its stuck at the windows logo and then it says "preparing automatic repair " and it keeps on beeping. I tried to find bios but i couldn't find it, i pressed every key but no bios. I then put a windows 8 disk but it doesn't have an option to boot from cd/dvd. Its an Msi motherboard ....
My specs:
msi white gtx960 2gb <- gpu
MSI 760GMA-P34(FX) <- motherboard
View 1 Replies
Nov 1, 2015
I had almost 300 g of 500 g free and suddenly it went to under 100 g. I did a system restore from before the memory loss and it is still there. can I find these 'files' and delete them or what is the problem?
View 3 Replies
Aug 6, 2015
Having switched from Windows 8 to 10 I find that most of my files have either no history of saved items or very limited history going back only a month or so.
View 7 Replies
Sep 5, 2015
Every time I turn on the computer, my wifi is always there. when I come back from sleep mode, it is not. no wifi options are available in the network section.
it is not signal strength. I had a slight USB issue, but as I said, I always get wifi when I turn it on, so seems any USB issue would show up when I boot either way..
Is the power surge to the USB ports the same whether you boot from off versus from sleep? is coming back from sleep different somehow than powering up from off?
View 2 Replies
Dec 24, 2015
Following a notification that I had a number of drivers which were 'very old' I updated them.
As a result I have lost the following hardware, which are not detected as being installed:
1. The battery --- there is no battery power
2. Sound ---- there are no audio devices
3. The webcams --- no camera or video devices are detected
View 6 Replies
Dec 24, 2015
Following a notification that I had a number of drivers which were 'very old' I updated them.
View 3 Replies
Dec 27, 2015
I am currently trying to convert my mSATA SSD from MBR to GPT. I have downloaded EaseUS partition master and can see that I can convert the disk using the software. My question is however if this is possible to do with my mSATA drive that my PC boots from and has Windows 10 installed or does it have to be a drive that is not booted from. I know there are lots of threads on this however none specify of this is possible using the drive you are booted from.
View 1 Replies
Apr 7, 2016
One of my computers has suddenly lost internet access, and as far as I can remember all I was doing last time I used it was going on the internet to websites I normally go to. All other computers and devices are fine. The computer in question says WiFi is connected, but no programs can access it including Google Chrome, Microsoft Edge, and my VPN. I haven't noticed any other problems on that computer.
Here's what I've tried so far:
Troubleshooting internet connection - no problems detected
Scanning with Webroot - no threats detected
Turning OFF Webroot - no change
When I try to access a website with Google Chrome I get the error message DNS_PROBE_FINISHED_NO_INTERNET.
View 12 Replies
Aug 12, 2015
I have a custom built computer with the following relevant internals:
Intel Core i5-3750k Ivy Bridge Quad-Core 3.4GHz (3.8GHz Turbo)
ASUS P8Z77-V LE LGA 1155 Intel Z77 HDMI SATA 6Gb/s USB 3.0 ATX Intel Motherboard
G.Skill Ripjaws Series 16Gb (4.4GB) 240-Pin DDR3 SDRAM DDR3 1333
ASUS HD7850-DC2-2GD5-V2 Radeon HD 7850 2GB 256-Bit video card
Samsung 840 Pro Series MZ-7PD128BW 2.5" 128GB SATA III Internal Solid State Drive
I was using Windows 7 with an external wifi adapter for internet access and the computer was perfectly fine. Upon upgrading to Windows 10, I instantly ran into issues that quickly grew worse. From the get go, I was unable to utilize anything on the taskbar, including icons that I placed there like Chrome and the newly installed Edge. The search bar was likewise inaccessible and now, after multiple restarts, I can no longer use the Start button with either mouse or keyboard. The internet icon on the taskbar will not work and even when attempting to access the internet after hitting ctr+alt+del, I find that the computer cannot even detect a connection, even though I know it should be able to. After a few minutes trying to mess around with other fuctions, the entire computer basically freezes and the entire computer locks up forcing a hard reboot.
Pictures and videos will not load (I can click on the My Computer icon on the desktop and access everything there), the computer telling me the files are corrupted. Same goes for documents, and games will not launch (Steam obviously cannot connect).
For lack of a better term, this issue is... weird. It's like I only have selective functionality over certain programs, although its selective enough that it has basically rendered my PC useless. I cannot even figure out how to uninstall Windows 10 because I can't access the Start menu.
View 1 Replies
Jul 27, 2015
I was upgrading from WP8.1 to W10 and all was going fine but then my internet connection went off for about 1 minute and then back on. Ever since that happened, the phone has been restarting (Nokia logo) and then the cogs are displayed for abt 15 seconds and the phone switches off. It repeats this if the USB cable is plugged in. I cannot use my phone.
View 1 Replies
Aug 18, 2015
General decrease in PC performance. So yesterday I updated my NVIDIA drivers from GeForce Experience (driver version 355.60) and ever since that my PC's performance has dropped considerably. Things are generally slower, but it is most most noticeable in games.
before the driver update I would get solid 60+ FPS in Battlefield 4 at Ultra settings, but now the average is 30-40 FPS on medium settings. Same situation for all my other games. I have tried uninstalling the driver and reinstalling it, and installing an older driver to no avail.
PC SPECS:
Strix GTX 970
AMD FX-8350
8GB RAM
600 WATT PSU
Nothing has been overclocked.
View 1 Replies
Dec 19, 2015
My new win 10 tablet is asking to the pw to this account, since the Hotmail account does not exist how can I get into my computer now! While windows 10 is seeking this email address, I am totally unable to access my tablet.
How can I fix this without a compete restart which will loose some valuable information that was stored on it. As this is a new system, there are no backups made.
View 1 Replies
Nov 5, 2015
I am finding the correct driver for my SATA RAID controller which is operating two mirrored 2TB hard drives. The computer still recognizes the controller being installed at the BIOS level. But currently Windows doesn't see the controller card or hard drives.
Information on the card is; Sil 3124 PCI/PCI-X to 4 port SATA300
System information is: AMD 64x2 Dual Core 5800+ 3.00GHZ with 6GB RAM operating Windows 10 Pro.
View 2 Replies
Jan 14, 2016
I just purchased a new laptop with Windows 10.
After installing Norton 360 antivirus, Firefox says "server not found" when I try to go to a web page.
Network trouble shooter says There are "missing network protocols and socket registry entries".
I reinstalled my network adapters and reset the winsock catalog and int ip sadly this did not work.
I contacted Norton tech support and they remotely installed the newest version that is supposed to be compatible with Win 10 however , about 5 min after hanging up the same problems are back.
View 3 Replies
Oct 15, 2015
I have a 120 gig solid state hard drive, that I have my OS installed on (Windows 10)
I was going to install windows 7 on a second partition on that hard drive, so I shrank the current partition and it gave me unallocated space.
I had a few people tell me it wasn't possible to install windows 7 on the same hard drive as windows 10... for some reason or another.
So I decided to expand the partition back to its original size (the whole hard drive).
Before I shrunk the partition.. I had 60 gigs left, I shrunk it by 20 to install windows 7 on.
Well after some people told me it wouldn't work. I decide to re-expand the partition to take back up the whole drive.
Problem is, when I did that.. I loss that 20 gigs, it says that 20 gigs is 'used' space now. I tried scanning the hard drive for errors and defragging (won't let me defrag that drive.. I assume cause its either a solid state drive or the windows drive)
I don't know how to get that lost 20 gigs back.
View 2 Replies
Nov 28, 2015
Here is the setup that I have. I have a wireless network. I have two Toshiba laptops, one running Windows 7 and the other running Windows 10 and I have a printer.
I continually lose connection to the home network although I am still connected to the internet on both laptops. This happens about every 10 or 15 minutes. The only way I've found to re-establish the network connection is to reboot both of the laptops.
I live in a very rural area and only have one option for internet access. It is through the phone company and all they offer is one of those 3G data card things that looks like a little USB data stick. The signal at my house is terrible, in fact, there is only one corner of my house that has a signal and that is where I have my wireless router. It is two rooms away from my computers. But the distance doesn't seem to be a problem for internet connection.
I complained to the phone company about the terrible signal and the woman there suggested that I use my Samsung phone as a router. I took the chip out of the data stick and put it in the phone. And it does work much better than the little Zoom router that I had been using. I do not know anything about the settings in the phone. The lady showed me which buttons to push on the phone to turn the phone on so it can find the signal.
I would prefer to know what I can do to keep it connected but if that fails, then I need to know how to re-connect to the network without rebooting either one or both of the laptops.
View 2 Replies
Aug 7, 2015
I use left handed mouse, and swapping left / buttons works OK. I also set the wheel button to be "double click". But the wheel button brings up the context menu instead of double click. If I change to right hand mouse, the wheel button gives double click as expected. how to make the wheel button give double click for left hand mouse?
View 5 Replies
Mar 18, 2015
Can't scroll by holding middle mouse and moving mouse in IE in the latest build.
View 2 Replies