Is there a way to create boot media on windows 10 for use in another pc? Customer tried to install w/o a backup & hosed the system, now black screen with mouse arrow & that's it.
View 1 RepliesI've been trying to create USB boot device for W10 but the program closes without warning a little while after it reaches the analysis stage (after 100% download)
I've tried 3 times now and can't figure out why its not working.
After installing a 32 bit windows 10 from a USB by mistake I decided to upgrade to the 64 bit version. I have 3 hard drives, one of which is an ssd that I am trying to install the OS to. After downloading and setting up the media creation tool and creating a USB I restarted and boot form USB.
I followed the steps and deleted the existing windows 10 partitions on my dad and tried installing straight to the unallocated space. After the installation completed it restarted the installer, which is not what happened when I previously successfully install windows 10. I then changed the boit order to have my ssd first and rebooted, which gave me the Reboot and select proper boot device or insert boot media error.
Confused I loaded up the installed and there were correctly partitioned installs already on the ssd ( although one partition looked a little small). I tried reinstalling windows 10 with the same result over and over.
Installed Win 10 and get it working. My problem is I have Win 8.1 Pro on a Samsung EVO SSD T-1. I went out and bought a Samsung 225 gig SSD HDD to install Win 10. I downloaded the Win 7 ISO and it worked perfectly. When I first tried to install Win 10 on the boot up with the USB flash media drive I went into setup on Win 10 and when I selected the new hard drive for the installation it gave me a message that it could not install on that drive. The other partition on the drive said system info. I hit delete and it installed. I don't know if I should have re formatted.
I go to bios setup on my motherboard Asus Z-97 and select Samsung EVO and it goes directly into Win 8.1 Pro. If I reboot and select in the bios Windows media drive it boots into Win 10. My question is I thought (based on all the screen shots I see here in the forum) that when I boot up my computer it should take me to a blue screen with 2 selection boxes Win 8.1 pro or Win 10 and I should be able to select.
I would rather see the 2 boxes where I can select one of them. My last question is when I bring up my Win 10 the fonts on the menus and etc. are so small I cannot hardly read them. I am using a LG 21.9 3440 x 1440 ultra wide monitor and have my text at largest and my screen zoomed to 150.
My laptop suddenly crashed and now it says "Boot media missing" when I restarted. After that, it always takes me to "Preparing Automatic Repair" and then the 'Troubleshoot' menu.
In the 'Troubleshoot' menu, it has two options: 'Reset this PC' and 'Advanced options'.
When I choose "Reset this PC", it asks me whether to keep my files or remove everything. I've tried both and it displays an error. When I choose to keep my files, it says that drive is locked and tells me to unlock the drive and try again. When I choose to remove everything, it says that there is a problem resetting the PC.
And then I've moved to "Advanced options". The options are: System Restore, System Image Recovery, Startup Repair, Command Prompt, UEFI Firmware Settings, and Go back to previous build. I've tried all of these and it all returned an error. When I chose UEFI Settings, it restarted to BIOS/UEFI setting. And my BIOS/UEFI can't detect my hard drive. DISKPART from Command Prompt can't detect it either.
My project is due in 3 days and I've got all my files in there. Is there a way to fix this? Or to recover my files?
My laptop suddenly crashed and now it says "Boot media missing" when I restarted. After that, it always takes me to "Preparing Automatic Repair" and then the 'Troubleshoot' menu.
In the 'Troubleshoot' menu, it has two options: 'Reset this PC' and 'Advanced options'.
When I choose "Reset this PC", it asks me whether to keep my files or remove everything. I've tried both and it displays an error. When I choose to keep my files, it says that drive is locked and tells me to unlock the drive and try again. When I choose to remove everything, it says that there is a problem resetting the PC.
And then I've moved to "Advanced options". The options are: System Restore, System Image Recovery, Startup Repair, Command Prompt, UEFI Firmware Settings, and Go back to previous build. I've tried all of these and it all returned an error. When I chose UEFI Settings, it restarted to BIOS setting. And my BIOS can't detect my hard drive. DISKPART from Command Prompt can't detect it either.
Recently I am notice Media Player is crashing while Groove cannot even find a single media file out of 100GB music. Audacious stupid Groove asks: "My dear please tell me where to search for your lovely music files?", but then turns over and goes to sleep. Very disappointing. Now I cannot play any music neither by Media Player nor Groove.
View 1 RepliesI have been unable to create new folders in File Explorer. When I click on a new folder icon, I get the "not responding" message and have to exit the application. This began happening several weeks ago and is now happening whenever I try to create a new folder.
View 2 RepliesRight click on Desktop > Personalize > Themes > Desktop Icon Settings > Add This PC...
This will make a "This PC" shortcut on desktop, which if you right click on, and choose Properties, will open up "System Details Window" rather than just showing a simple Properties window.
I want to automate the creation of this shortcut by a .reg or a .bat file somehow, Please note, just .rar or .bat automation.
Going from Windows 7 to Windows 10 I don't know how to create & save a document.
View 4 RepliesHow can I create a shortcut for My Computer (This PC) on desktop in Windows 10? Actually there are 2 kind of shortcut for My Computer:
1. If I just open File Explorer, from left panel I drag and drop This PC to desktop and a shortcut will be created on desktop (This PC - Shortcut). If I right click on that shortcut and choose Properties, "This PC - Shortcut Properties" windows will be opened, which is NOT what I want.
2. I need This PC shortcut that when I right click on it and choose Properties, "Control PanelSystem and SecuritySystem" is shown! And I don't know how to create this one!
I have recently updated to Version 1511 and thought I would try to create a recovery drive on a USB having been unsuccessful when trying in the earlier Windows 10. This time it seemed to be working with the system files box checked, though it seemed to take an age before the USB was required to be inserted. It said I would require a USB of 8GB minimum capacity so I used a 16GB size.
When it finished creating the drive ( I did not see the actual finish but no messages were left on screen) I noticed that the USB had only a little over 1 GB of information loaded.
I would probably find it useful if I could be told what files I should expect to find on the USB and the size of each. The files in my USB are titled: boot; efi; sources; bootmgr; bootmgr.efi and reagent. The sources file ( 1GB) is by far the largest.
Is there an application, freeware or paid, that works in creating restore points in Windows 10, so if an installed application messes things up, I can restore the saved point, so Windows 10 loads as if the application was never installed in the first place, and Windows registry etc is restored to as it was BEFORE the application was installed?
View 9 RepliesI need to install Linux for school and therefore was partitioning my windows. I created a 60GB and 1GB swap ext3 partitions using easus partition master and now I am getting a blue screen with that code. Note; I haven't tried to install Linux yet.
I used repair in windows usb media which couldn't find anything, then I tried the following:
photos uploaded upsidedown and in REVERSE ORDER
How do I stop the Photo App from creating albums on it's own? It's not a feature I'm interested in.
View 2 RepliesHave been adding many shortcut icons to the desktop by:
Right click on desktop/new/shortcut
Create shortcut window opens & I hit the browse button, which then opens a browser window where I can select "This PC" and navigate to C:Program files to select the .exe file.
This procedure worked well for about 20 items or so. Now when I get to the browser window, the only item in the tree is "Desktop/Gary" - Nothing else, so I can't get to C: drive.
In the meantime, I used File Explorer to locate the .exe file & right click/ send to desktop.
It's possible you might have the contents of the ISO but not the actual ISO image itself on HDD.It's still possible to create a bootable USB using purely MANUAL commands for this example assume Disk nr is 7 and the USB stick is on drive H. The files from the ISO are in say folder WINDVD on drive E here's what to do.
1) open CMD as administrator
2) DISKPART
3) LIST DISK
4) SELECT DISK 7 (remember our example above)
5) CLEAN
6) CREATE PARTITION PRIMARY
7) ACTIVE
8) FORMAT FS=NTFS QUICK
9) EXIT (don't close the cmd prompt though)
10) CD E:WINDVDBOOT (again from example contents of ISO are on drive E)
11) BOOTSECT /NT60 H:
12) After 11) finishes - takes 1 sec approx. copy the entire contents of directory WINDVD to the USB stick as is - copy contents in same folder layout as on the disk - don't have WINDVD as the high level - copy CONTENTS so ist folder on USB stick will be BOOT.
13) now you've got a bootable USB.
I am looking at making a back up of win 10 on here. I see there are anumber of different ways. On this Hp they have their own media creation tool but it says I can make only one. Is there also a limit to the windows creation tool?
View 10 RepliesI have upgraded my Windows 8.1 system to Windows 10 through the Windows update app and have created an installation media USB stick. I want to clean install, something I am very familiar with, but not since the new uefi, gpt, legacy etc. that I'm not familiar with. If I do a clean install and delete the entire disk, Windows will create the partitions and install the necessary "data" to run the computer correctly? I don't need to save the data on the hidden partitions that are present now?
View 9 RepliesThese are my issues:
When I create a New Folder and try naming it, it freezes, then Explorer will restart. The folder will be made but if I try to rename it, it will do the same thing.
When I try deleting that empty folder, the Moving to Recycle bin takes over 30 sec long, there is nothing inside it. I can delete a big regular file instantly.
The Context menu also has very black thicker separator lines compared to what it should be a faint light grey color. That was the first thing I noticed that was off.
I downloaded Windows 10 and created a Microsoft account. I wrote down the password. The next day a log in screen appeared (which I never had before) so I tried to log in. My password didn't work. I tried everything. I called Microsoft and filled out a form and emailed it in. They Told me I have two step verification and they would have to download a program to my computer and I will lose all my software.
View 9 RepliesI tried to create a Password Rest Disk, but when I clicked on the "Create a Password Reset Disk" link in Control Panel, nothing happened ?? No new window appeared.
View 2 RepliesIs it possible to create a new entry in the context menu in "new"? I often need an empty paint-pic.
For example .....
while trying to troubleshoot a lousy 1.5TB WD drive I had accidentally deleted and recreated the partition on a different USB drive without noticing.What are my options? I don't have a spare drive to restore to. The drive was only using 350GB of 900gb, but it has been filled and erased several times without defragmenting. I have it unplugged now.
It's not entirely a disaster; aside from my (dubiously obtained) movie collection there's nothing really that I need and can't redownload or have on my SSD.
In Windows 10.x, when I create a Microsoft account for a user, he will have to verify it when he will sign-in (login) on the system to enable some functionality.
Is there a way to create a Microsoft account already verified?
I have managed to create a USB pen drive to apply WIM images using the DISM Apply-image command in 64bit so I know it can be done but how to create a pen to apply 32bit WIM images
View 6 Replies